All Issue

2023 Vol.55, Issue 4 Preview Page

Research Article

Characterization of Surface Modification of Woody Biomass Grafted with Acrylic Monomers

아크릴계 모노머의 그라프팅을 통한 목질계 바이오매스의 표면개질 연구

Donghyun Kim1
,
Yunji Lee1
,
Bo Min Kim2
,
Kang-Jae Kim3†
,
Jaehyeung Park4‡
김 동현1
,
이 윤지1
,
김 보민2
,
김 강재3†
,
박 재형4‡
1Department of Wood Science and Technology, Kyungpook National University
2Department of Carbon and Fiber Composite Materials, Kyungpook National University
3Major in Wood Science and Technology, School of Forestry, Science and Landscape Architecture & Agricultural Science and Technology Research Institute, Kyungpook National University
4Department of Bio-Fibers and Bio-Materials Science & Agricultural Science and Technology Research Institute, Kyungpook National University
1경북대학교 임산공학과, 학생
2경북대학교 탄소복합섬유소재학과, 학생
3경북대학교 산림과학·조경학부 임산공학전공 및 농업과학기술연구소, 교수
4경북대학교 바이오섬유소재학과 및 농업과학기술연구소, 교수
†Corresponding author: E-Mail: jaeya0624@knu.ac.kr (Address: Major in Wood Science and Technology, School of Forestry, Science and Landscape Architecture, Kyungpook National University, Republic of Korea)
‡Co-corresponding Author: E-Mail: parkj@knu.ac.kr (Address: Department of Bio-Fibers and Bio-Materials Science, Kyungpook National University, Republic of Korea)
30 August 2023. pp. 29-37
PDF XML Citation
Abstract

This study aimed to improve the surface properties of lignocellulosic cellulose fiber using the oxidative grafting method. Various acrylic monomers were used, including methyl methacrylate, methyl acrylate, ethyl acrylate, and varying monomer concentrations. In addition, the effect of ceric ammonium nitrate (CAN) as an initiator on the grafting efficiency and surface modification was investigated. The experimental results showed that the kind and concentration of acrylic monomer and the presence of the CAN initiator had a substantial impact on grafting efficiency and surface modification. This study contributes to the advancement of surface modification strategies for cellulose-based bioplastics and provides insights into the optimization of the oxidative grafting process.

Keywords
Organosolv process
acrylic monomer
grafting copolymerization
surface modification
ceric ammonium nitrate
References
1
Thakur, V. K., Thakur, M. K., and Gupta, R. K., Graft copolymers of natural fibers for green composites, Carbohydrate Polymers 104:87-93 (2014). 10.1016/j.carbpol.2014.01.01624607164
2
Hon. D. N. S., On the reactivity of cellulose free radicals in graft copolymerization reactions, Journal of Polymer Science: Polymer Chemistry Edition 18:1857-1869 (1980). 10.1002/pol.1980.170180620
3
Kang, H., Liu, R., and Huang, Y., Graft modification of cellulose: Methods, properties and applications, Polymer 70:A1-A16 (2015). 10.1016/j.polymer.2015.05.041
4
Thakur, V. K., Thakur, M. K., and Gupta, R. K., Synthesis of lignocellulosic polymer with improved chemical resistance through free radical polymerization, International Journal of Biological Macromolecules 61:121-126 (2013). 10.1016/j.ijbiomac.2013.06.04523831536
5
Takács, E., Wojnárovits, L., Borsa, J., and Rácz, I., Hydrophilic/hydrophobic character of grafted cellulose, Radiation Physics and Chemistry 79:467-470 (2010). 10.1016/j.radphyschem.2009.09.012
6
Dahou, W., Ghemati, D., Oudia, A., and Aliouche, D., Preparation and biological characterization of cellulose graft copolymers, Biochemical Engineering Journal 48:187-194 (2010). 10.1016/j.bej.2009.10.006
7
Thakur, V. K., Thakur, M. K., and Gupta, R. K., Development of functionalized cellulosic biopolymers by graft copolymerization, International Journal of Biological Macromolecules 62:44-51 (2013). 10.1016/j.ijbiomac.2013.08.02623994197
8
Gardner, D. J., Oporto, G. S., Mills, R., and Samir, M. A. S. A., Adhesion and surface issues in cellulose and nanocellulose, Journal of Adhesion Science and Technology 22:545-567 (2008). 10.1163/156856108X295509
9
Kalia, S., Boufi, S., Celli, A., and Kango, S., Nanofibrillated cellulose: surface modification and potential applications, Colloid Polymer Science 292:5-31 (2014). 10.1007/s00396-013-3112-9
10
Roy, D., Semsarilar, M., Guthriea, J. T., and Perrier, S., Cellulose modification by polymer grafting: a review, Chemical Society Reviews 38:2046-2064 (2009). 10.1039/b808639g19551181
11
Joshi, J. M. and Sinha, V. K., Ceric ammonium nitrate induced grafting of polyacrylamide onto carboxymethyl chitosan, Carbohydrate Polymers 67:427-435 (2007). 10.1016/j.carbpol.2006.06.021
12
Lee, S., Park, S. H., Jin, S. H., ans Lee, S. Y., Grafting of MMA onto MCC through free radical method and its application to all natural cellulose composite film preparation, Journal of the Korean Oil Chemists' Society 25:459-468 (2008).
13
Routray, C. and Tosh, B., Controlled grafting of MMA onto cellulose and cellulose acetate, Cellulose 19:2115-2139 (2012). 10.1007/s10570-012-9762-9
14
Kim, K. J., Hong, S. B., and Eom, T. J., Preparation of Eucalyptus pulp by mild condition of low temperature, atmospheric pressure, and short-reaction-time with high-boiling-point solvent and pulp properties, Cellulose 25:753-761 (2018). 10.1007/s10570-017-1564-7
15
Lee, J. M., Ahn, E. B., Choi, H. S., Ryu, J. A., and Eom, T. J., Study on improvement of preparation efficiency of lignin rich micro-cellulosic fines, Journal of Korea TAPPI 50(5):114-122 (2018). 10.7584/JKTAPPI.2018.10.50.5.114
16
Misra, B. N., Mehta, I. K., and Dogra, R., Grafting onto wood. VII. ceric ion-initiated graft copolymerization of vinyl monomers. Comparison monomer reactivities, Journal of Applied Polymer Science 25:235-241 (1980). 10.1002/app.1980.070250209
17
Sugumaran, D. and Karim, K. J. A., Removal of copper (II) ion using chitosan-graft-poly (methyl methacrylate) as adsorbent, eProceedings Chemistry 2:1-11 (2017).
18
Kim, K. J. and Eom, T. J., Ageing behavior of beeswax coated Hanji(I) -Thermal ageing test of beeswax coated Hanji-, Journal of Korea TAPPI 42(2):46-52 (2010).
19
Široky, J., Blackburn, R. S., Bechtold, T., Taylor, J., and White, P., Attenuated total reflectance Fourier-transform Infrared spectroscopy analysis of crystallinity changes in lyocell following continuous treatment with sodium hydroxide, Cellulose 17:103-115 (2010). 10.1007/s10570-009-9378-x
20
Kim, K. J., Ryu, J. A., Choi, S. R., Jung, B. G., Lee, J. M., and Eom, T. J., Glycol ether-organosolv pulping process of radiata pine and comparison of characteristics with UKP, Journal of Korea TAPPI 52(1):94-102 (2020). 10.7584/JKTAPPI.2020.02.52.1.94
21
Lee, Y., Ryu, J. A., Kim, K. T., and Kim, K. J., Scientific approach to confirm the excellence of Seokgayeoraehaengjeoksong as Korean cultural heritage, Journal of Korea TAPPI 52(6):73-81 (2020). 10.7584/JKTAPPI.2020.12.52.6.73
22
Kenyon, R. S. and Garnett, J. L., Acid catalyzed grafting of monomers to wool, Journal of Polymer Science: Polymer Letters Edition 11:651-654 (1973). 10.1002/pol.1973.130111010
23
Kim, K. J., Nah, G. B., Ryu, J. A., and Eom, T. J., Preparation of lignin rich micro-cellulose fines (LMCFs) by chemical micronization method and characteristics of LMCFs handsheet, Journal of Korea TAPPI, 49(3):109-117 (2017). 10.7584/JKTAPPI.2017.06.49.3.109
24
Kim, K. J., Ahn, E. B., Ryu, J. A., and Eom, T. J., Identification of pulp fibers in the chronological academic journals using spectroscopic method, Journal of Korea TAPPI 50(4):61-70 (2018). 10.7584/JKTAPPI.2018.08.50.4.61
Information
  • Publisher :Korea Technical Association of The Pulp and Paper Industry
  • Publisher(Ko) :한국펄프종이공학회
  • Journal Title :Journal of Korea TAPPI
  • Journal Title(Ko) :펄프종이기술
  • Volume : 55
  • No :4
  • Pages :29-37
  • Received Date : 2023-07-19
  • Revised Date : 2023-08-07
  • Accepted Date : 2023-08-09
  • DOI :https://doi.org/10.7584/JKTAPPI.2023.8.55.4.29
Journal Informaiton Journal of Korea TAPPI Journal of Korea TAPPI
Online Submission
  • scopus
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crosscheck
  • orcid
Journal Informaiton Journal Informaiton - close