Study of Drying Energy and Yield lmprovement for OCC Linerboard

Lae Hyuk Kang; Yung Bum Seo

doi:10.7584/JKTAPPI.2017.08.49.4.55

All Issue

2017 Vol.49, Issue 4 Preview Page Next Page

Study of Drying Energy and Yield lmprovement for OCC Linerboard 라이너지의 수율증대와 건조에너지의 저감

30 August 2017. pp. 55-64

PDF XML

Abstract

The cleaner rejects of OCC (old corrugated container) were fractionated by size and reused by adding small fraction of GCC (ground calcium carbonate) to the fractionated fine rejects and by applying preflocculation process for the GCC-added fine rejects in the all OCC linerboard process. The processed rejects were added to the cleaner passed furnish, and their physical properties of the handsheets were compared to those of the cleaner passed furnish without the processed rejects. The results were increase in yield for production cost reduction and higher solid contents for drying energy reduction. Furthermore, brightness, ERIC value, compressive strength, and double folds were not deteriorated by the process, compared to the cleaner passed furnish.

Keywords

OCC

linerboard

preflocculation

reject fractionation

cleaner reject

References

Literature Cited

J. G. Jung, Y. H. Lee, Y. J. Sung and Y. B. Seo, Journal of Korea TAPPI, Utilization of wood flour for drying energy saving of old corrugated container, 46(6); 8-25 (2014)

Jung, J. G., Lee, Y. H., Sung, Y. J., and Seo, Y. B., Utilization of wood flour for drying energy saving of old corrugated container, Journal of Korea TAPPI 46(6):8-25 (2014).

10.7584/ktappi.2014.46.6.008

J. H. Lee, Y. B. Seo and Y. Jeon, Journal of Korea TAPPI, Strength property improvement of OCC-based paper by chemical and mechanical treatments (I), 32(1); 10-18 (2000)

Lee, J. H., Seo, Y. B., and Jeon, Y., Strength property improvement of OCC-based paper by chemical and mechanical treatments (I), Journal of Korea TAPPI 32(1):10-18 (2000).

J. H. Lee, Y. B. Seo and Y. Jeon, Journal of Korea TAPPI, Strength property improvement of OCC-based paper by chemical and mechanical treatments (II), 32(2); 1-7 (2000)

Lee, J. H., Seo, Y. B., and Jeon, Y., Strength property improvement of OCC-based paper by chemical and mechanical treatments (II), Journal of Korea TAPPI 32(2):1-7 (2000).

Y. L. Zhao, Z. S. Hu, Y. Deng and A. Ragauskas, Tappi J, Improvement of paper properties using starch-modified precipitated calcium carbonate filler, 4(2); 3-7 (2005)

Zhao, Y. L., Hu, Z. S., Deng, Y., and Ragauskas, A., Improvement of paper properties using starch-modified precipitated calcium carbonate filler, Tappi J. 4(2):3-7 (2005).

H. Fan, D. Wang, W. Bai and J. Liu, BioResources, Starch-sodium stearate complex modified PCC filler and its application in papermaking, 7(3); 3317-3326 (2012)

Fan, H., Wang, D., Bai, W., and Liu, J., Starch-sodium stearate complex modified PCC filler and its application in papermaking, BioResources 7(3):3317-3326 (2012).

S. Y. Yoon and Y. L. Deng, Applied Polymer Science, Clay-starch composite and their application in papermaking, 100; 1032-1038 (2006)

Yoon, S. Y. and Deng, Y. L., Clay-starch composite and their application in papermaking, Applied Polymer Science 100:1032-1038 (2006).

10.1002/app.23007

S. Y. Yoon and Y. L. Deng, Tappi J, Starch-fatty complex modified filler for papermaking, 5(9); 3-9 (2006)

Yoon, S. Y. and Deng, Y. L., Starch-fatty complex modified filler for papermaking, Tappi J. 5(9):3-9 (2006).

Y. Z. Sang, M. McQuaid and P. Englezos, BioResources, Pre-flocculation of precipitated calcium carbonate filler by cationic starch for highly filled mechanical grade paper, 7(1); 354-373 (2012)

Sang, Y. Z., McQuaid, M., and Englezos, P., Pre-flocculation of precipitated calcium carbonate filler by cationic starch for highly filled mechanical grade paper, BioResources 7(1): 354-373 (2012).

V. S. Chauhan and N. K. Bhardwaj, APPITA J, Effect of particle size and preflocculation of talc filler on sizing characteristics of paper, 66(1); 66-72 (2013)

Chauhan, V. S. and Bhardwaj, N. K., Effect of particle size and preflocculation of talc filler on sizing characteristics of paper, APPITA J. 66 (1):66-72 (2013).

D. Seo, W. H. Im, H. J. Youn and H. L. Lee, Nordic Pulp Pap. Res. J, The effect of process variables for GCC pre-flocculation on floc and handsheet properties, 27(2); 382-387 (2012)

Seo, D., Im, W. H., Youn, H. J., and Lee, H. L., The effect of process variables for GCC pre-flocculation on floc and handsheet properties, Nordic Pulp Pap. Res. J. 27 (2):382-387 (2012).

10.3183/npprj-2012-27-02-p382-387

Y. Sang and H. J. Xiao, Colloids Interface Sci, Clay flocculation improved by cationic poly (vinyl alcohol)/anionic polymer dual-component system, 326; 420-425 (2008)

Sang, Y. and Xiao, H. J., Clay flocculation improved by cationic poly (vinyl alcohol)/anionic polymer dual-component system, Colloids Interface Sci. 326:420-425 (2008).

10.1016/j.jcis.2008.06.058

Y. B. Seo, J. K. Chung and Y. H. Lee, Preparation method of filler and the paper containing the filler thereby (2015)

Seo, Y. B., Chung, J. K., and Lee, Y. H., Preparation method of filler and the paper containing the filler thereby, Korea Patent Registered No. 1015103130000 (2015).

J. G. Jung and Y. B. Seo, Journal of Korea TAPPI, Development of hybrid calcium carbonate for high loading paper (I), 47(4); 30-37 (2015)

Jung, J. G. and Seo, Y. B., Development of hybrid calcium carbonate for high loading paper (I), Journal of Korea TAPPI 47(4):30-37 (2015).

Information

Publisher :Korea Technical Association of The Pulp and Paper Industry
Publisher(Ko) :한국펄프종이공학회
Journal Title :Journal of Korea TAPPI
Journal Title(Ko) :펄프종이기술
Volume : 49
No :4
Pages :55-64
Received Date : 2017-08-04
Revised Date : 2017-08-14
Accepted Date : 2017-08-16
DOI :https://doi.org/10.7584/JKTAPPI.2017.08.49.4.55

Journal of Korea TAPPI ISSN:0253-3200(Print) 펄프종이기술

All Issue

Literature Cited