Journal of Korea TAPPI ISSN:0253-3200(Print) 펄프종이기술

L. Szabó, A. Soria, J. Forsström, J. T. Keränen and E. Hytönen, Environmental Science & Policy, A world model of the pulp and paper industry: Demand energy consumption and emission scenarios to 2030, 12; 257-269 (2009)

Szabó, L., Soria, A., Forsström, J., Keränen, J. T., and Hytönen, E., A world model of the pulp and paper industry: Demand energy consumption and emission scenarios to 2030, Environmental Science & Policy 12:257-269 (2009).

G. Ting, Energy Procedia, Researches of developing strategies and guarantee mechanism of energy saving and emission reduction on paper-making enterprises - Case study of Shandong Haiyun high-efficiency ecological park, 5; 674-678 (2011)

Ting, G., Researches of developing strategies and guarantee mechanism of energy saving and emission reduction on paper-making enterprises - Case study of Shandong Haiyun high-efficiency ecological park, Energy Procedia 5:674-678 (2011).

10.1016/j.egypro.2011.03.119

P. Austin, Reducing energy consumption in paper making using advanced processes control and optimization, ELCF Seminar, Dept. of Engineering, University of Cambridge. (2010)

Austin, P., Reducing energy consumption in paper making using advanced processes control and optimization, ELCF Seminar, Dept. of Engineering, University of Cambridge (2010).

L. M. Calvo and R. Domingo, Sustainability, CO₂ emissions reduction and energy efficiency improvements in paper making drying process control by sensors, 9(4); 514 (2017)

Calvo, L. M. and Domingo, R., CO₂ emissions reduction and energy efficiency improvements in paper making drying process control by sensors, Sustainability 9(4), 514 (2017).

10.3390/su9040514

R. Singh, N. K. Bhardwaj and B. Choudhury, Journal of Scientific & Industrial Research, Cellulase-assisted refining optimization for saving electrical energy demand and pulp quality evaluation, 74; 471-475 (2015)

Singh, R., Bhardwaj, N. K., and Choudhury, B., Cellulase-assisted refining optimization for saving electrical energy demand and pulp quality evaluation, Journal of Scientific & Industrial Research 74:471-475 (2015).

L. Kilponen, Improvement of heat recovery in existing paper machines, Helsinki University of Technology. (2002)

Kilponen, L., Improvement of heat recovery in existing paper machines, Thesis for the degree of Licentiate of Science in Technology, Helsinki University of Technology (2002).

L. Sivill and P. Ahtila, Applied Thermal Engineering, Energy efficiency improvement of dryer section heat recovery systems in paper machines. A case study, 29; 3663-3668 (2009)

Sivill, L. and Ahtila, P., Energy efficiency improvement of dryer section heat recovery systems in paper machines. A case study, Applied Thermal Engineering 29:3663-3668 (2009).

10.1016/j.applthermaleng.2009.06.022

Y. Zhao, Z. Hu, A. Ragauskas and Y. Deng, Tappi J, Improvement of paper properties using starch-modified precipitated calcium carbonate filler, 4(2); 3-7 (2005)

Zhao, Y., Hu, Z., Ragauskas, A., and Deng, Y., Improvement of paper properties using starch-modified precipitated calcium carbonate filler, Tappi J. 4(2):3-7 (2005).

J. Shen, Z. Song, X. Quan and W. Liu, BioResources, Modification of papermaking grade fillers: A brief review, 4(3); 1190-1209 (2009)

Shen, J., Song, Z., Quan, X., and Liu, W., Modification of papermaking grade fillers: A brief review, BioResources 4(3):1190-1209 (2009).

T. Li, J. Fan, J. Qi, L. Liu, L. Li, X. Qian, Q. Wang, Y. Ni and J. Shen, Journal of Bioresourses and Bioproducts, Tailoring starch-engineered mineral particles towards enhanced interaction with cellulosic fibers, 2(1); 36-44 (2017)

Li, T., Fan, J., Qi, J., Liu, L., Li, L., Qian, X., Wang, Q., Ni, Y., and Shen, J., Tailoring starch-engineered mineral particles towards enhanced interaction with cellulosic fibers, Journal of Bioresourses and Bioproducts 2(1):36-44 (2017).

S. Mabee and R. Harvey, Filler flocculation technology - Increasing sheet filler content without loss in strength or runnability parametersProceedings of TAPPI Papermaking Conference (2000)

Mabee, S. and Harvey, R., Filler flocculation technology - Increasing sheet filler content without loss in strength or runnability parameters, Proceedings of TAPPI Papermaking Conference (2000).

K. H. Lee and H. L. Lee, Journal of Korea TAPPI, Preflocculation of GCC with cationic PAM and cationic starch and the influence of their dosage and shear rate on prefloc size, 38(4); 1-9 (2006)

Lee, K. H. and Lee, H. L., Preflocculation of GCC with cationic PAM and cationic starch and the influence of their dosage and shear rate on prefloc size, Journal of Korea TAPPI 38 (4):1-9 (2006).

M. Petersson, The effect of pre-flocculation of fillers on paper strength, Chalmers University of Technology. (2011)

Petersson, M., The effect of pre-flocculation of fillers on paper strength, M. S. Thesis, Chalmers University of Technology (2011).

Y. Sang, M. McQuaid and P. Englezos, BioResources, Pre-flocculation of precipitated calcium carbonate filler by cationic starch for highly filled mechanical grade paper, 7(1); 354-373 (2012)

Sang, Y., McQuaid, M., and Englezos, P., Pre-flocculation of precipitated calcium carbonate filler by cationic starch for highly filled mechanical grade paper, BioResources 7(1):354-373 (2012).

C. H. Kim, J. Y. Lee, H. J. Gwak, H. K. Chung, K. K. Back, H. J. Lee, S. H. Kim and H. R. Kang, Journal of Korea TAPPI, Improvement of paper strength using pretreated precipitated calcium carbonate, 42(1); 41-47 (2010)

Kim, C. H., Lee, J. Y., Gwak, H. J., Chung, H. K., Back, K. K., Lee, H. J., Kim, S. H., and Kang, H. R., Improvement of paper strength using pretreated precipitated calcium carbonate, Journal of Korea TAPPI 42(1):41-47 (2010).