Journal of Korea TAPPI ISSN:0253-3200(Print) 펄프종이기술

Page, D., The beating of chemical pulps-the action and the effects, Proceeding of the 9th Fundamental Research Symposium, Cambridge, UK. pp. 1-38 (1989).

Ito, K., Takeshita, Y., and Antensteiner, P., Low consistency refining technology: LemaxX spiral-nature applied, Japan Tappi Journal 60(5):718-723 (2006).

Mikko, P., Rethinking the art of refining: Improving the efficiency and quality of refining, Proceedings of International Mechanical Pulping Conference, Beijing, China, pp. 227-224 (2015).

Liang, Q., A novel design of a refiner plate, China Pulp and Paper Industry 35(24):33-34 (2014).

Wang, C. and Wang, P., Logarithmic spiral and its application in the design of refiner plate, China Pulp and Paper 34(9):37-41 (2015).

Jiang, S., Yan, Z., and Jiang, X., High consistency refiner curved bar refining plate, East China Pulp and Paper Industry 47(1):27-29 (2016).

Brecht, W. and Siewert, W., Zur theoretisch-technischen beurteilung des mahlprozesses moderner mahlmaschinen, Das Papier 20(1):4-14 (1966).

Lumiainen, J., Specific surface load theory, 3rd Pira International Refining Conference, Atlanta, USA, Paper 5 (1995).

Kerekes, R. J., Characterization of pulp refiners by a C-factor, Nordic Pulp Paper Research Journal 5(1):3-8 (1990).

Shen, L., Design and selection of refining plate bar parameter, East China Pulp & Paper Industry 29(1):27-33 (1999).

Meltzer, F. P. and Sepke., P.-W., New ways to forecast the technological results of refining, 3rd Pira International Refining Conference, Atlanta, USA, Paper 2 (1995).

Musselman, R., Letarte, D., and Simard, R., Third stage low consistency refining of TMP for energy savings and quality enhancement, 4th Pira International Refining Conference, Fiuggi, Italy, pp. 139-148 (1997).

Roux, J. C., Bloch, J.-F., Bordin, R., and Nortier, P., The normal force per crossing point: A unified concept for the low consistency refining of pulp suspensions, 14th Fundamental Research Symposium, Oxford, UK, pp. 51-83 (2009).

Liu, H., Dong, J., Jing, H., Guo, X., and Qiao, L., Characterization of the parameters for the refining intensity in terms of performance, Journal of Korea TAPPI 51(2):26-39 (2019).

Liu, H., Dong, J., Guo, X., Yang, R., Jing, H., and Jiang, X., Design method of curved-bar refining plates for disc refiner, Paper and Bio-material, 4(1):40-47 (2019).

Leider, P. J. and Rihs, J., Spiral groove pattern refiner plate, U.S. Pat. Appl. US4023737 (1997).

Hackl, M., Feichtinger, K., and Wendelin, G., Rotor disk, U.S. Pat. Appl. US20120294725A1 (2012).

Lumiainen, J., New theory can improve practice, Pulp and Paper International, 32(8):46-47, 54 (1990).

Technical Association of The Pulp and Paper Industry, TAPPI standard TIP 0508-05: Refiner plate intensity organization, USA (1994).