All Issue

2025 Vol.57, Issue 4 Preview Page

Original Paper

30 August 2025. pp. 77-89
Abstract
References
1

United Nations Framework Convention on Climate Change (UNFCCC), The Paris Agreement (2016).

2

IPCC, Climate Change 2023: Synthesis Report Contribution of Working Groups I, II and III to the Sixth Assessment Report of the Intergovernmental Panel on Climate Change, Geneva (2023).

4

Peres, C., Resende, P., Nunes, L., and Morais, L., Advances in carbon capture and use (CCU) technologies: A comprehensive review and CO2 mitigation potential analysis, Clean Technol. 4:1193-1207 (2022).

10.3390/cleantechnol4040073
5

Bui, M., Adjiman, C. S., Bardow, A., Anthony, E. J., Boston, A., Brown, S., Fennell, P. S., Fuss, S., Galindo, A., Hackett, L. A., Hallett, J. P., Herzog, H. J., Jackson, G., Kemper, J., Krevor, S., Maitland, G. C., Matuszewski, M., Metcalfe, I. S., Petit, C., Puxty, G., Reimer, J., Reiner, D. M., Rubin, E. S., Scott, S. A., Shah, N., Smit, B., Trusler, J. P. M., Webley, P., Wilcox, J., and Mac, N., Carbon capture and storage (CCS): The way forward, Energy Environ. Sci. 11(5):1062-1176 (2018).

10.1039/C7EE02342A
6

Johnson, E., Goodbye to carbon neutral: Getting biomass footprints right, Environ. Impact Assess Rev. 29:165-168 (2009).

10.1016/j.eiar.2008.11.002
7

Cho, Y., Kim, K., and Eom, T., Improvements of strength and retention of cotton handsheet by additives(II) the durability test of cotton handsheet with additives, TAPPI J. 46:29-38 (2014).

10.7584/ktappi.2014.46.1.029
8

Ko, Y., Lee, J., Kim, H., and Sung, Y., The fundamental absorbency mechanisms of hygiene paper, TAPPI J. 48:85-97 (2016).

10.7584/jktappi.2016.10.48.5.85
10

Yousef, S., Hamdy, M., Ttariants, M., Tuckute, S., El, S. Z., Kliucininkas, L., and Baltusnikas, A., Sustainable industrial technology for recovery of cellulose from banknote production waste and reprocessing into cellulose nanocrystals, Resour. Conserv. Recycl. 149:510-520 (2019).

10.1016/j.resconrec.2019.06.026
11

Hadiya, V., Popat, K., Vyas, S., Varjani, S., Vithanage, M., Gupta, V. K., Núñez Delgado, A., Zhou, Y., Show, P. L., Bilal, M., Zhang, Z., Sillanpää M., Mohanty, S. S., and Patel, Z., Biochar production with amelioration of microwave-assisted pyrolysis: Current scenario, drawbacks and perspectives, Bioresour. Technol. 355:127303-127313 (2022).

10.1016/j.biortech.2022.127303
12

Ke, L., Zhou, N., Wu, Q., Zeng, Y., Tian, X., Zhang, J., Fan, L., Ruan, R., and Wang, Y., Microwave catalytic pyrolysis of biomass: A review focusing on absorbents and catalysts, Npj Mater. Sustain. 2:24 (2024).

10.1038/s44296-024-00027-7
13

Yun, H., Hwang, S. W., Jung, M., Choi, I. G., Yeo, H., and Kwak, H. W., Microwave-assisted utilization of kraft lignin-derived activated carbon for efficient dye removal, Biomass Bioenergy 186:107279 (2024).

10.1016/j.biombioe.2024.107279
14

Jung, H., Min, B., Kim, S., Jo, J., Seo, J., and Kim, J. W., Optimization of microwave-assisted process for extraction of bioactive compounds from corncob, KSBB J. 33:26-33 (2018).

10.7841/ksbbj.2018.33.1.26
15

Abdollahi, Y., Zakaria, A., Matori, K. A., Shameli, K., Jahangirian, H., Rezayi, M., and Abdollahi, T., Interactions between photodegradation components, Chem. Cent. J. 6:100 (2012).

10.1186/1752-153X-6-10022967885PMC3770455
16

Park, S., Kim, H., and Cho, J. I., Optimal central composite designs for fitting second order response surface linear regression models, In Recent Advances in Linear Models and Related Areas, Shalabh, C. H. (ed.), Physica Heidelberg, pp. 323-339 (2008).

10.1007/978-3-7908-2064-5_17
17

Lopes, B. G., Faria, G. A., Maltoni, K. L., Rocha, P. S., Peixoto, A. P. B., Oliveira, T. A., Fonseca, A. D., and Felizardo, L. M., Classification of the coefficient of variation for experiments with eucalyptus seedlings in greenhouse, Revista Ciencia Agronomica 52:1-14 (2021).

10.5935/1806-6690.20210050
18

Wei, L., Huang, Y., Huang, L., Li, Y., Huang, Q., Xu, G., Müller, K., Wang, H., Ok, Y. S., and Liu, Z., The ratio of H/C is a useful parameter to predict adsorption of the herbicide metolachlor to biochars, Environ. Res. 184:109324 (2020).

10.1016/j.envres.2020.109324
19

Chen, B., Zhou, D., and Zhu, L., Transitional adsorption and partition of nonpolar and polar aromatic contaminants by biochars of pine needles with different pyrolytic temperatures, Environ. Sci. Technol. 42(14):5137-5143 (2008).

10.1021/es8002684
20

Xiao, X., Chen, Z., and Chen, B., H/C atomic ratio as a smart linkage between pyrolytic temperatures, aromatic clusters and sorption properties of biochars derived from diverse precursory materials, Sci. Rep. 6:22644 (2016).

10.1038/srep2264426940984PMC4778134
21

Kumar, S., Rai, A., and Prasad, K., Optimization and multifactor assessments of supercritical Moringa oleifera seed oil extraction, Food. Meas. 19:1586-1602 (2025).

10.1007/s11694-024-03045-0
22

Zhang, H., Cheng, Y., Zhong, Y., Ni, J., Wei, R., and Chen, W., Roles of biochars’ properties in their water-holding capacity and bound water evaporation: Quantitative importance and controlling mechanism, Biochar 6:30 (2024).

10.1007/s42773-024-00317-2
23

Lin, J., Sun, S., Xu, D., Cui, C., Ma, R., Luo, J., Fang, L., and Li, H., Microwave directional pyrolysis and heat transfer mechanisms based on multiphysics field stimulation: Design porous biochar structure via controlling hotspots formation, Chem. Eng. J. 429:132195 (2022).

10.1016/j.cej.2021.132195
24

Wang, Y., Advancing temperature development and sustainability of animal mortality composting systems using biochar amendment and utilizing the end-product to improve crop resilience, Ph.D. thesis, University of Illinois at Urbana-Champaign (2022).

25

Jia, A., Song, X., Li, S., Liu, Z., Liu, X., Han, Z., Gao, H., Gao, Q., Zha, Y., Liu, Y., Wu, X., and Wang, G., Biochar enhances soil hydrological function by improving the pore structure of saline soil, Agric. Water Manag. 306:109170 (2024).

10.1016/j.agwat.2024.109170
26

Cho, H. and Sung, Y., Manufacturing of solid substrates using waste paper fiber and biochar, TAPPI J. 56:30-37 (2024).

10.7584/JKTAPPI.2024.2.56.1.30
Information
  • Publisher :Korea Technical Association of The Pulp and Paper Industry
  • Publisher(Ko) :한국펄프종이공학회
  • Journal Title :Journal of Korea TAPPI
  • Journal Title(Ko) :펄프종이기술
  • Volume : 57
  • No :4
  • Pages :77-89
  • Received Date : 2025-08-03
  • Revised Date : 2025-08-14
  • Accepted Date : 2025-08-14