Journal of Korea TAPPI ISSN:0253-3200(Print) 펄프종이기술

Lumiainen, J., Is the lowest refining intensity the best in low consistency refining of hardwood pulps? Papermakers Conference, Tappi Press, Atlanta, USA, pp. 115-126 (1994).

Liu, H., Dong, J. X., and Han, L. B., Quantitative analysis of pulp refining and its research progress, China Pulp & Paper 37(8):66-71 (2018).

Rihas, J., Low consistency refining, theory vs practice, 3rd International Refining Seminar, Atlanta, USA, Paper 10 (1995).

Tappi Stock Preparation Committee, An introduction to refining variables, Tappi Journal 54(10):1738-1741 (1971).

Roux, J. C., Stock preparation. Part 1: Pulp treatment process, 12th Fundamental Research Symposium, Oxford, UK, pp. 17-21 (2001).

Dietemann, P. and Roux, J. C., A study of disc refiner running in no-load conditions, Cellulose Chemistry and Technology 39(5-6):459-471 (2005).

Brecht, W. and Siewert, W., Zur theoretischtechnischen beurteilung des mahlprozesses moderner mahlmaschinen (The theoretical-technical assessment of the grinding process of modern grinding machines), Das Papier 20(1):4-14 (1966).

Westman, L., Idling losses in the low-consistency refining of chemical pulp, Svensk Papperstidning 87(3):R8-R13 (1984).

Siewert, W. H. and Selder, H., Economic use of energy in pulp refining, Int. Sym. on Fundamental Concepts of Refining, Appleton, USA, pp. 206-216 (1980).

Selder, H. and Siewert, W. H., Escher wyss fiber sorter for the high density screening of recycled fibres, Papermakers Conference, Proceedings of the Technical Association of the Pulp and Paper industry, Atlanta, USA (1980).

Rajabi Nasab, N., Olson, J. A., Heymer, J., and Martinez, D. M., Experimental study of low consistency refiner no-load power, PAPERCON Conference Proceedings, New Orleans, LA, USA, pp. 1539-1551 ( 2012).

Rajabi Nasab, N., Olson, J. A., Heymer, J., and Martinez, D. M., Understanding of no-load power in low consistency refiners, Canadian Journal of Chemical Engineering 92(3):524-535 (2013).

Banks, W. A., Design considerations and engineering characteristics of disc refiners, Paper Technology and Industry 8(4):363-369 (1967).

Herbert, W. and Marsh, P. G., Mechanics and fluid dynamics of a disk refiner, Tappi Journal 51(5):235-239 (1968).

Sferrazza, M., Proper refiner selection up keep boots performances and savings, Pulp and Paper Canada 70(2):89-94 (1996).

Finebar refining technology, Introduction to stock prep refining, http://www.aikawagroup.com/downloads/Training_Manual.pdf (2001).

Harrington, C. G., Selection of refiner drive motors, Tappi 47(6): 157A (1964).

Li, S. Y., Calculation and comparison of power consumption of disc refiners, Papermaking of Guangdong 1:29-37 (1983).

Cui, W. K., Some experience of designing a disc refiner, Tianjin Paper Communication 3(41):21-25 (1976).

Liu, C. E., Liu, S. X., and Fu, G. Y., Power and efficiency of disc refiners, Heilongjiang Paper 3(1):1-6 (1995)．

Lundin, T., Tailoring pulp fibre properties in low consistency refining, Ph.D. Thesis, ABO Akademi University, Oulu, Sweden (2008).

Luukkonen, A., Development of a methodology to optimize low consistency refining of mechanical pulp, Ph.D. Thesis, University of British Columbia, Vancouver, Canada (2011).

Bordin, R., Roux, J. C., and Bloch, J. F., No-load power evolution during low consistency pulp beating, Nordic Pulp and Paper Research Journal 23(1):34-38 (2008).

Koskenhely, K., Somboon, P., and Paulapuro, H., Reproducibility of refiner performance, Pulp and Paper Canada 107(7/8):46 (2006).

Liu, H., Dong, J. X., Luo, C., Guo, X. Y., Wang, S., Yang, R. F., Qiao, L. J., and Duan, C. W., Characterization of fiber cutting in low consistency refining, Proceedings of the 4th China Pulp and Paper Machinery Development Forum, Hangzhou, China, pp. 163-169 (2019).

Xie, R. J., Research on energy consumption characteristics of single disc refiner, Master’s Thesis, Tianjin University of Science and Technology, Tianjin, China (2015).

Baker, C., Refining and improved paper machine runnability, Proceedings of 7th PIRA International Refining Conference & Exhibition, Stockholm, Sweden, pp. 25-26 (2003).

Mrozifiski, A., Modelling of waste-paper stock treatment process in disc refiners, Journal of Polish CIMAC 3:113-119 (2010).

Antku, J. and Ludwig, C. J., Optimizing refiner plate bar height will reduce energy consumption, Pulp and Pap 60(3):95-97 (1986).

Siewert, H. and Selder, H., Energiewirtschaftliche aspekte der ganzstoffmahlung (Energy management aspects of full-size refiner), Vortragen auf der Informationstagung Energieverbrauch der Vereinigun Pack-und Wellpapappenpapiere (Energy Consumption Conference of the Association of Packing and Corrugated Paper), Konstantz, Germany (1976).