Analysis of Surface Roughness Characteristics of Paper Coated with Nanocellulose and Oxidized Starch according to Measurement Method

Hee-Won Kim; Yoon-Taek Oh; Hyung-Jin Kim; Young-Chan Ko; Jong-Moon Park

doi:10.7584/JKTAPPI.2019.02.51.1.37

All Issue

2019 Vol.51, Issue 1 Preview Page Next Page

Analysis of Surface Roughness Characteristics of Paper Coated with Nanocellulose and Oxidized Starch according to Measurement Method 측정방법에 따른 나노셀룰로오스와 산화전분 도공지의 표면 거칠음도 특성 분석

28 February 2019. pp. 37-45

PDF XML

Abstract

Cellulose is one of the constituents of plants and is an environmentally friendly resource with a semi-permanent supply and high biodegradability. CNF from cellulose is useful for various purposes. CNF has high aspect ratio and high specific surface area and it is excellent in mechanical properties and thermal stability, and it has shear-thinning flow characteristics. When CNF is coated on paper, it provides high barrier property with excellent network forming ability. The surface roughness of the coated paper is one of the characteristics that determine the quality of coated paper and printing. The surface roughness is measured by the stylus profiling, the air leak, and the optical image analysis methods. Each analysis method has certain characteristics, so surface roughness of coated paper was analyzed by those three methods and results were compared. After mixed coating of CNF and oxidized starch, the degree of roughness was increased in the probe method and the air leakage method when the coating weight and the amount of CNF were increased. The degree of roughness which is measured by Optitopo decreased when the mixed solution was coated. Because the range of roughness measured by each measurement method is different, it might give different tendencies.

Keywords

Surface roughness

nanocellulose

stylus profiling

air leak

optical

fractal dimension value

SMD

References

Literature Cited

A. F. Turbak, F. W. Snyder and K. R. Sandberg, J. Appl. Polym. Sci.: Applied Polymer Symposia, Microfibrillated cellulose, a new cellulose product: Properties, uses and commercial potential, 37; 815-827 (1983)

Turbak, A. F., Snyder, F. W., and Sandberg, K. R., Microfibrillated cellulose, a new cellulose product: Properties, uses and commercial potential, J. Appl. Polym. Sci.: Applied Polymer Symposia 37:815-827 (1983).

F. Herrick, R. Casebier, J. Hamilton and K. Sandberg, J. Appl. Polym. Sci.: Applied Polymer Symposia, Microfibrillated cellulose: Morphology and accessibility, 37; 797-813 (1983)

Herrick, F., Casebier, R., Hamilton, J., and Sandberg, K., Microfibrillated cellulose: Morphology and accessibility, J. Appl. Polym. Sci.: Applied Polymer Symposia 37:797-813 (1983).

H. P. S. A. Khalil, Y. Davoudpour, Md. N. Islam, A. Mustapha, K. Sudesh, R. Dungani and M. Jawaid, Carbohydrate Polymers, Production and modification of nanofibrillated cellulose using various mechanical process: A review, 99(1); 649-665 (2014)

Khalil, H. P. S. A., Davoudpour, Y., Islam, Md. N., Mustapha, A., Sudesh, K., Dungani, R., and Jawaid, M., Production and modification of nanofibrillated cellulose using various mechanical process: A review, Carbohydrate Polymers 99(1):649-665 (2014).

10.1016/j.carbpol.2013.08.069

W. Y. Song, S. Y. Juhn and S. J. Shin, Journal of Korea TAPPI, Characteristics of cellulose nanofibril produced after quaternary amine pretreatment, 50(5); 107-113 (2018)

Song, W. Y., Juhn, S. Y., and Shin, S. J., Characteristics of cellulose nanofibril produced after quaternary amine pretreatment, Journal of Korea TAPPI 50(5):107-113 (2018).

10.7584/jktappi.2018.10.50.5.107

J. Y. Lee, C. H. Kim, E. H. Kim, T. U. Park, J. P. Jeun and S. Y. Kim, Journal of Korea TAPPI, Evaluation of electron beam irradiation as new pretreatment for cellulose nanofibril production, 48(4); 99-106 (2016)

Lee, J. Y., Kim, C. H., Kim, E. H., Park, T. U., Jeun, J. P., and Kim, S. Y., Evaluation of electron beam irradiation as new pretreatment for cellulose nanofibril production, Journal of Korea TAPPI 48(4):99-106 (2016).

10.7584/JKTAPPI.2016.08.48.4.99

H. J. Park, S. Y. Yook., S. Y. Park. and H. J. Youn, Journal of Korea TAPPI, Hydrophobization of cellulose nanofibrils by silylation under an aqueous system, 50(3); 72-77 (2018)

Park, H. J., Yook., S. Y., Park., S. Y., and Youn, H. J., Hydrophobization of cellulose nanofibrils by silylation under an aqueous system, Journal of Korea TAPPI 50(3):72-77 (2018).

10.7584/JKTAPPI.2018.06.50.3.72

V. Kumar, D. W. Bousfield and M. Toivakka, Slot coating of nanocellulose on paperboardProceedings of PaperCon, 2017 (2017)

Kumar, V., Bousfield, D. W., and Toivakka, M., Slot coating of nanocellulose on paperboard, Proceedings of PaperCon 2017 (2017).

M. Ek, G. Gellerstedt and G. Henriksson, Pulp and Paper Chemistry and Technology: Paper Products Physics and Technology, 4; 213-223, Berlin. Walter De Gruyter. (2009)

Ek, M., Gellerstedt, G., and Henriksson, G., Pulp and Paper Chemistry and Technology: Paper Products Physics and Technology, Vol. 4, pp. 213-223, Walter De Gruyter, Berlin (2009).

10.1515/9783110213461

S. H. Lee, Journal of Korea TAPPI, Characterization of surface properties of hygiene paper by fractal dimension analysis technique, 49(6); 90-101 (2017)

Lee, S. H., Characterization of surface properties of hygiene paper by fractal dimension analysis technique, Journal of Korea TAPPI 49(6):90-101 (2017).

10.7584/JKTAPPI.2017.12.49.6.90

A. G. Constantine and P. Hall, J. Royal Statistical Society Ser. B., Characterizing surface smoothness via estimation of effective fractal dimension, 56(1); 97-113 (1994)

Constantine, A. G. and Hall, P., Characterizing surface smoothness via estimation of effective fractal dimension, J. Royal Statistical Society Ser. B. 56(1):97-113 (1994).

10.1111/j.2517-6161.1994.tb01963.x

J. H. Dwiggins, F. D. Harper, G. A. Schulz, B. J. Schuh, M. S. Heath and T. P. Oriaran, Soft bulky multi-ply product and method of making the same, Assignee: Fort James Corp.. (2003)

Dwiggins, J. H., Harper, F. D., Schulz, G. A., Schuh, B. J., Heath, M. S., and Oriaran, T. P., Soft bulky multi-ply product and method of making the same, IS 6,558,511, Assignee: Fort James Corp. (2003).

I. Kajanto, J. Laamanen, M. Kainulainen and K. Niskanen (ed.), Paper Bulk and Surface, 16; 89-115, Finland. Fapet Oy. (1998)

Kajanto, I., Laamanen, J., and Kainulainen, M., Paper Bulk and Surface, Niskanen, K. (ed.), Vol. 16, pp. 89-115, Fapet Oy, Finland (1998).

F. D. Harper, T. P. Oriaran and J. D. Litvay, Soft, bulky single-ply absorbent paper having a serpentine configuration, Assignee: Fort James Corp.. (2002)

Harper, F. D., Oriaran, T. P., and Litvay, J. D., Soft, bulky single-ply absorbent paper having a serpentine configuration, US 6,372,087, Assignee: Fort James Corp. (2002).

F. Richmond, Electronic Theses and Dissertations., Cellulose nanofibers use in coated paper, 2242 (2014)

Richmond, F., Cellulose nanofibers use in coated paper, Electronic Theses and Dissertations. 2242 (2014).

Paper and board - Determination of roughness/smoothness (air leak methods), Part 2: Bendtsen method (2013)

KS M ISO 8791-2, Paper and board - Determination of roughness/smoothness (air leak methods) - Part 2: Bendtsen method (2013).

Information

Publisher :Korea Technical Association of The Pulp and Paper Industry
Publisher(Ko) :한국펄프종이공학회
Journal Title :Journal of Korea TAPPI
Journal Title(Ko) :펄프종이기술
Volume : 51
No :1
Pages :37-45
Received Date : 2019-01-18
Revised Date : 2019-02-17
Accepted Date : 2019-02-18
DOI :https://doi.org/10.7584/JKTAPPI.2019.02.51.1.37

Journal of Korea TAPPI ISSN:0253-3200(Print) 펄프종이기술

All Issue

Literature Cited