All Issue

2018 Vol.50, Issue 4 Preview Page
Strength Improvement of Linerboard by Wet-end Application of Sludge and Black Liquor

흑액 및 슬러지 내첨처리에 의한 라이너지 강도 개선

Kyoung-Hwa Choi1
,
Jae-Hun Lee
,
Byoung-Uk Cho†
최경화 1
,
이재훈
,
조병욱 †
Program of Paper Science & Engineering, Division of Forest Material Science and Engineering, College of Forest and Environmental Sciences, Kangwon National University, Chunchon
1Changgang Institute of Paper Science and Technology, Kangwon National University, Chunchon
강원대학교 산림환경과학대학 산림응용공학부 제지공학전공
1강원대학교 창강제지기술연구소
†Corresponding author: E-Mail: bucho@kangwon.ac.kr
30 August 2018. pp. 141-148
PDF XML Citation
Abstract

In this study, effects of the wet-end addition of sludge and black liquor on strength properties of linerboard were investigated. Handsheets were prepared with old corrugated container (OCC) stock received from a linerboard mill and various dosages of sludge and black liquor based on dry pulp weight were added to the OCC stock with flocculants. Strength of OCC handsheet was initially increased with the addition of sludge without flocculants and black liquor and then passed through a maximum at 10% sludge addition. Without sludge, addition of flocculants into the OCC stock improved paper strength. However, paper strength was significantly decreased with sludge addition and the use of flocculants could not improved the decreased paper strength. Addition of black liquor to sludge with flocculants improved paper strength, especially folding strength and compressive strength. Conclusively, a certain amount of paper mill sludge could be utilized for production of linerboard and the decreased paper strength with addition of sludge could be recovered by the addition of black liquor and flocculants.

Keywords
Sludge
black liquor
linerboard
old corrugated containers (OCC)
paper strength
References

Literature Cited

1
The Science Times [Internet], Waste marine discharge, prohibited from New Year, Available from: http://www.sciencetimes.co.kr/?p=145163&cat=32&post_type=news

The Science Times [Internet], Waste marine discharge, prohibited from New Year, 2016 Jan. 4. Available from: http://www.sciencetimes.co.kr/?p=145163&cat=32&post_type=news.

2
M. T. Rashid, D. Barry and M. Goss, Soil & Environ, Paper mill biosolids application to agricultural lands: benefits and environmental concerns with special reference to situation in Canada, 25(2); 85-98 (2006)

Rashid, M. T., Barry, D., and Goss, M., Paper mill biosolids application to agricultural lands: benefits and environmental concerns with special reference to situation in Canada, Soil & Environ. 25(2):85-98 (2006).

3
X. Geng, S. Y. Zhang and J. Deng, Wood and Fiber Science, Characteristics of paper mill sludge and its utilization for the manufacture of medium density fiber board, 39(2); 345-351 (2007)

Geng, X., Zhang, S. Y., and Deng, J., Characteristics of paper mill sludge and its utilization for the manufacture of medium density fiber board, Wood and Fiber Science 39(2):345-351 (2007).

4
M. E. Manesh, Utilization of pulp and paper mill sludge as filler in nylon biocomposite production, Canada. University of Toronto. (2012)

Manesh, M. E., Utilization of pulp and paper mill sludge as filler in nylon biocomposite production, Ph.D. Thesis, University of Toronto, Canada (2012).

5
D. B. Song, E. J. Bae, C. H. Kim and M. R. Huh, Journal of Korea TAPPI, Analysis of plant growth effects using seedling pots made from paper mill sludges, 42(2); 12-19 (2012)

Song, D. B., Bae, E. J., Kim, C. H., and Huh, M. R., Analysis of plant growth effects using seedling pots made from paper mill sludges, Journal of Korea TAPPI 42(2):12-19 (2012).

6
M. Likon and P. Trebše, Chapt. 4. Recent advances in paper mill sludge management; 74-90, In Industrial Waste, Croatia. InTech. (2012)

Likon, M. and Trebše, P., Recent advances in paper mill sludge management, Chapt. 4, In Industrial Waste, InTech, Croatia, pp. 74-90 (2012).

10.5772/37043
7
A. Hagelqvist, Sludge from pulp and paper mills for biogas production, Sweden. Karlstad University. (2013)

Hagelqvist, A., Sludge from pulp and paper mills for biogas production, Ph.D. Thesis, Karlstad University, Sweden (2013).

8
K. M. Granström and J. Montelius, J. Chem. Chem, Eng, Pre-treatment to enhance biogas yield from pulp and paper mill sludge, 8; 825-833 (2014)

Granström, K. M. and Montelius, J., Pre-treatment to enhance biogas yield from pulp and paper mill sludge, J. Chem. Chem, Eng. 8:825-833 (2014).

9
D. S. Kim, Y. J. Sung and H. Y. Cho, Journal of Korea TAPPI, Development of soil surface hardening mulching system by using paper mill sludge ash, 46(4); 85-92 (2014)

Kim, D. S., Sung, Y. J., and Cho, H. Y., Development of soil surface hardening mulching system by using paper mill sludge ash, Journal of Korea TAPPI 46(4):85-92 (2014).

10.7584/ktappi.2014.46.4.085
10
J. Y. Lee, C. H. Kim, G. S. Lee, H. S. Jo, H. G. Nam, H. H. Park and S. O. Moon, Journal of Korea TAPPI, Physico-chemical characteristics of biodegradable seedling pots made of paper mill sludges, 46(5); 9-18 (2014)

Lee, J. Y., Kim, C. H., Lee, G. S., Jo, H. S., Nam, H. G., Park, H. H., and Moon, S. O., Physico-chemical characteristics of biodegradable seedling pots made of paper mill sludges, Journal of Korea TAPPI 46(5):9-18 (2014).

10.7584/ktappi.2014.46.5.009
11
S. Boshoff, Characterization and fermentation of waste paper sludge for bioethanol production, South Africa. Stellenbosch University. (2015)

Boshoff, S., Characterization and fermentation of waste paper sludge for bioethanol production, Master’s Thesis, Stellenbosch University, South Africa (2015).

12
A. Williams, The production of bioethanol and biogas from paper sludge, South Africa. Stellenbosch University. (2017)

Williams, A., The production of bioethanol and biogas from paper sludge, Master’s Thesis, Stellenbosch University, South Africa (2017).

13
R. Sakar, R. Kurar, A. K. Gupta, A. Mudgal and V. Gupta, Cogent Engineering, Use of paper mill waste for brick making, 4(1); 1405768 (2017)

Sakar, R., Kurar, R., Gupta, A. K., Mudgal, A., and Gupta, V., Use of paper mill waste for brick making, Cogent Engineering 4(1):1405768 (2017).

14
J. G. Son, H. S. Yang and H. J. Kim, Journal of Thermoplastic Composite Materials, Physico-mechanical properties of paper sludge-thermopalstic polymer compsites, 17(6); 509-522 (2004)

Son, J. G., Yang, H. S., and Kim, H. J., Physico-mechanical properties of paper sludge-thermopalstic polymer compsites, Journal of Thermoplastic Composite Materials 17(6): 509-522 (2004).

15
J. Gironès, G. Pardini, F. Vilaseca and P. Mutjé, Journal of Polymers and the Environment, Recycling of paper mill sludge as filler/reinforcement in polypropylene composites, 18(3); 407-412 (2010)

Gironès, J., Pardini, G., Vilaseca, F., and Mutjé, P., Recycling of paper mill sludge as filler/reinforcement in polypropylene composites, Journal of Polymers and the Environment 18 (3):407-412 (2010).

16
T. Kuokkanen, H. Nurmesniemi, R. Pöykiö, K. Kujala, J. Kaakinen and M. Kuokkanen, Chemical Speciation & Bioavailability, Chemical and leaching properties of paper mill sludge, 20(2); 111-122 (2008)

Kuokkanen, T., Nurmesniemi, H., Pöykiö, R., Kujala, K., Kaakinen, J., and Kuokkanen, M., Chemical and leaching properties of paper mill sludge, Chemical Speciation & Bioavailability 20(2):111-122 (2008).

10.3184/095422908x324480
17
J. H. Cho, Y. S. Choi and K. H. Park, Journal of Korea TAPPI, Studies on the recycling of sludge originated from a copy paper mill by calcination, 42(1); 1-6 (2010)

Cho, J. H., Choi, Y. S., and Park, K. H., Studies on the recycling of sludge originated from a copy paper mill by calcination, Journal of Korea TAPPI 42(1):1-6 (2010).

18
M. J. Jackson and M. A. Line, Journal of Agricultural and Food Chemistry, Organic composition of a pulp and paper mill sludge determined by FTIR, 13C CP MAS NMR, and chemical extraction techniques, 45(6); 2354-2358 (1997)

Jackson, M. J. and Line, M. A., Organic composition of a pulp and paper mill sludge determined by FTIR, 13C CP MAS NMR, and chemical extraction techniques, Journal of Agricultural and Food Chemistry 45(6):2354-2358 (1997).

10.1021/jf960946l
19
N. Maximova, Adsorption of lignin and lignin/cationic polymer complexes on cellulose fibres and their effect on sheet properties, Helsinki, Finland. Helsinki University of Technology. (2004)

Maximova, N., Adsorption of lignin and lignin/cationic polymer complexes on cellulose fibres and their effect on sheet properties, Doctorial Thesis, Helsinki University of Technology, Helsinki, Finland (2004).

20
S. Antonsson, The use of lignin derivatives to improve selected paper properties; 3, TRITA-CHE-Report, Sockholm, Sweden. KTH Chemical Science and Engineering. (2007)

Antonsson, S., The use of lignin derivatives to improve selected paper properties, TRITA-CHE-Report, KTH Chemical Science and Engineering, Sockholm, Sweden, p. 3 (2007).

21
M. N. Saidan, Chemical Industry & Chemical Engineering Quarterly, Improvement of linerboard compressive strength by hot-pressing and addition of recovered lignin from spent pulping liquor, 21(1); 107-112 (2015)

Saidan, M. N., Improvement of linerboard compressive strength by hot-pressing and addition of recovered lignin from spent pulping liquor, Chemical Industry & Chemical Engineering Quarterly 21(1):107-112 (2015).

10.2298/ciceq131205012s
22
J. H. Lee, K. H. Choi and B.-U. Cho, Journal of Korea TAPPI, Strength improvement of linerboard by wet-end application of black liquor, 48(4); 78-85 (2016)

Lee, J. H., Choi, K. H., and Cho, B.-U., Strength improvement of linerboard by wet-end application of black liquor, Journal of Korea TAPPI 48(4):78-85 (2016).

10.7584/jktappi.2016.08.48.4.78
23
K.-M. Han and B.-U. Cho, BioResources, Effect of surface sizing of black liquor on properties of corrugated medium, 11(4); 11059-10403 (2016)

Han, K.-M. and Cho, B.-U., Effect of surface sizing of black liquor on properties of corrugated medium, BioResources 11(4):11059-10403 (2016).

10.15376/biores.11.4.10391-10403
Information
  • Publisher :Korea Technical Association of The Pulp and Paper Industry
  • Publisher(Ko) :한국펄프종이공학회
  • Journal Title :Journal of Korea TAPPI
  • Journal Title(Ko) :펄프종이기술
  • Volume : 50
  • No :4
  • Pages :141-148
  • Received Date : 2018-08-06
  • Revised Date : 2018-08-22
  • Accepted Date : 2018-08-23
  • DOI :https://doi.org/10.7584/JKTAPPI.2018.08.50.4.141
Journal Informaiton Journal of Korea TAPPI Journal of Korea TAPPI
Online Submission
  • scopus
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crosscheck
  • orcid
Journal Informaiton Journal Informaiton - close