All Issue

2018 Vol.50, Issue 3 Preview Page
30 June 2018. pp. 44-52
Abstract
References

Literature Cited

1
N. S. Cho and D. S. Min, Jounal of Korea TAPPI, Effect of filler addition on properties of sheets prepared from bacterial cellulose, 30(4); 35-41 (1998)

Cho, N. S. and Min, D. S., Effect of filler addition on properties of sheets prepared from bacterial cellulose, Jounal of Korea TAPPI 30(4):35-41 (1998).

2
L. Li, A. Cillis and R. Pelton, Jounal of Pulp and Paper Science, A new analysis of filler effects on paper strength, 28(8); 267-273 (2002)

Li, L., Cillis, A., and Pelton, R., A new analysis of filler effects on paper strength, Jounal of Pulp and Paper Science 28(8):267-273 (2002).

3
J. A. F. Gamelas, A. F. Lourenço, M. Xavier and P. J. Ferreira, Jounal of Chemical Engineering Research and Design, Modification of precipitated calcium carbonate with cellulose ester and use as filler in papermaking, 92(11); 2425-2430 (2014)

Gamelas, J. A. F., Lourenço, A. F., Xavier, M., and Ferreira, P. J., Modification of precipitated calcium carbonate with cellulose ester and use as filler in papermaking, Jounal of Chemical Engineering Research and Design 92(11):2425-2430 (2014).

10.1016/j.cherd.2014.02.003
4
A. Dufresne, Materialstory, Nanocellulose: A new ageless bionanomaterial, 16(6); 220-227 (2013)

Dufresne, A., Nanocellulose: A new ageless bionanomaterial, Materialstory 16(6):220-227 (2013).

10.1016/j.mattod.2013.06.004
5
K. Morseburg and G. Chinga-Carrasco, Cellulose, Assessing the combined benefits of clay and nanofibrillated cellulose in layered TMP-based sheets, 16(5); 795-806 (2009)

Morseburg, K., and Chinga-Carrasco, G., Assessing the combined benefits of clay and nanofibrillated cellulose in layered TMP-based sheets, Cellulose 16(5):795-806 (2009).

6
A. Turbak, F. Snyder and K. Sandberg, Journal of Applied Polymer Science, Microfibrillated cellulose: a new cellulose product: properties, uses, and commercial potential, 37; 815-827 (1983)

Turbak, A., Snyder, F., and Sandberg, K., Microfibrillated cellulose: a new cellulose product: properties, uses, and commercial potential. Journal of Applied Polymer Science 37:815-827 (1983).

7
D. J. Gardner, G. S. Oporto, R. Mills and M. A. S. Azizi Samir, Journal of Adhesion Science and Technology, Adhesion and surface issues in cellulose and nanocellulose, 22(5-6); 545-567 (2008)

Gardner, D. J., Oporto, G. S., Mills, R., and Azizi Samir, M. A. S., Adhesion and surface issues in cellulose and nanocellulose, Journal of Adhesion Science and Technology 22(5-6): 545-567 (2008).

10.1163/156856108x295509
8
J. M. Lee, Journal of Korea TAPPI, Paper properties improvement by adding Microfibrillated cellulose-mineral composites, 48(2); 83-90 (2016)

Lee, J. M., Paper properties improvement by adding Microfibrillated cellulose-mineral composites, Journal of Korea TAPPI 48(2): 83-90 (2016).

10.7584/ktappi.2016.48.2.083
9
S. M. Yong, Y. K. Lee and J. M. Won, Journal of Korea TAPPI, Improvement of paper properties by GCC-MFC composite filler, 48(4); 32-38 (2016)

Yong, S. M., Lee, Y. K., and Won, J. M., Improvement of paper properties by GCC-MFC composite filler, Journal of Korea TAPPI 48(4):32-38 (2016).

10.7584/jktappi.2016.08.48.4.32
10
K. Torvinen, J. Sievänen, T. Hjelt and E. Hellén, Cellulose, Smooth and flexible filler-nanocellulose composite structure for printed electronics applications, 19(3); 821-829 (2012)

Torvinen, K., Sievänen, J., Hjelt, T., and Hellén, E., Smooth and flexible filler-nanocellulose composite structure for printed electronics applications, Cellulose 19(3):821-829 (2012).

10.1007/s10570-012-9677-5
11
K. J. Kim, J. D. Jung, S. E. Jung, E. B. Ahn and T. J. Eom, Journal of Korea Technical Association of The Pulp and Paper Industry, Enzyme activity and beating properties for preparation of microfibrillated cellulose (MFC), 47(1); 59-65 (2015)

Kim, K. J., Jung, J. D., Jung, S. E., Ahn, E. B., and Eom, T. J., Enzyme activity and beating properties for preparation of microfibrillated cellulose (MFC), Journal of Korea Technical Association of The Pulp and Paper Industry 47(1):59-65 (2015).

10.7584/ktappi.2015.47.1.059
12
T. Taipale, M. Österberg, A. Nykänen, J. Ruokolainen and J. Laine, Cellulose, Effect of microfibrillated cellulose and fines on the drainage of kraft pulp suspension and paper strength, 17(5); 1005-1020 (2010)

Taipale, T., Österberg, M., Nykänen, A., Ruokolainen, J., and Laine, J., Effect of microfibrillated cellulose and fines on the drainage of kraft pulp suspension and paper strength, Cellulose 17(5):1005-1020 (2010).

10.1007/s10570-010-9431-9
13
K. L. Spence, R. A. Venditti, O. J. Rojas, Y. Habibi and J. J. Pawlak, Cellulose, A comparative study of energy consumption and physical properties of microfibrillated cellulose produced by different processing methods, 18(4); 1097-1111 (2011)

Spence, K. L., Venditti, R. A., Rojas, O. J., Habibi, Y., and Pawlak, J. J., A comparative study of energy consumption and physical properties of microfibrillated cellulose produced by different processing methods, Cellulose 18(4):1097-1111 (2011).

10.1007/s10570-011-9533-z
14
E. L. Hult, M. Iotti and M. Lenes, Cellulose, Efficient approach to high barrier packaging using microfibrillar cellulose and shellac, 17(3); 575-586 (2010)

Hult, E. L., Iotti, M., and Lenes, M., Efficient approach to high barrier packaging using microfibrillar cellulose and shellac, Cellulose 17(3):575-586 (2010).

10.1007/s10570-010-9408-8
15
H. Sehaqui, Q. Zhou and L. A. Berglund, Nordic Pulp & Paper Research Journal, Nanofibrillated cellulose for enhancement of strength in high-density paper structure, 28(2); 182-189 (2013)

Sehaqui, H., Zhou, Q., and Berglund, L. A., Nanofibrillated cellulose for enhancement of strength in high-density paper structure, Nordic Pulp & Paper Research Journal 28(2): 182-189 (2013).

10.3183/npprj-2013-28-02-p182-189
16
S. Ahola, M. Österberg and J. Laine, Cellulose, Cellulose nanofibrils—adsorption with poly (amideamine) epichlorohydrin studied by QCM-D and application as a paper strength additive, 15(2); 303-314 (2008)

Ahola, S., Österberg, M., and Laine, J., Cellulose nanofibrils—adsorption with poly (amideamine) epichlorohydrin studied by QCM-D and application as a paper strength additive, Cellulose 15(2):303-314 (2008).

10.1007/s10570-007-9167-3
17
M. He, B. U. Cho and J. M. Won, Carbohydrate Polymers, Effect of precipitated calcium carbonate-Cellulose nanofibrils composite filler on paper properties, 136; 820-825 (2016)

He, M., Cho, B. U., and Won, J. M., Effect of precipitated calcium carbonate-Cellulose nanofibrils composite filler on paper properties, Carbohydrate Polymers 136:820-825 (2016).

10.1016/j.carbpol.2015.09.069
18
R. Tantra, P. Schulze and P. Quincey, Particuology, Effect of nanoparticle concentration on zeta-potential measurement results and reproducibility, 8(3); 279-285 (2010)

Tantra, R., Schulze, P., and Quincey, P., Effect of nanoparticle concentration on zeta-potential measurement results and reproducibility, Particuology 8(3):279-285 (2010).

10.1016/j.partic.2010.01.003
19
P. Mpofu, J. Addai-Mensah and J. Ralston, International Journal of Mineral Processing, Investigation of the effect of polymer structure type on flocculation, rheology and dewatering behaviour of kaolinite dispersions, 71(1-4); 247-268 (2003)

Mpofu, P., Addai-Mensah, J., and Ralston, J., Investigation of the effect of polymer structure type on flocculation, rheology and dewatering behaviour of kaolinite dispersions. International Journal of Mineral Processing 71(1-4): 247-268 (2003).

10.1016/s0301-7516(03)00062-0
20
A. N. Nakagaito and H. Yano, Applied Physics A, Novel highstrength biocomposites based on microfibrillated cellulose having nano-order-unit weblike network structure, 80(1); 155-159 (2005)

Nakagaito, A. N., and Yano, H., Novel highstrength biocomposites based on microfibrillated cellulose having nano-order-unit weblike network structure, Applied Physics A 80(1):155-159 (2005).

10.1007/s00339-003-2225-2
Information
  • Publisher :Korea Technical Association of The Pulp and Paper Industry
  • Publisher(Ko) :한국펄프종이공학회
  • Journal Title :Journal of Korea TAPPI
  • Journal Title(Ko) :펄프종이기술
  • Volume : 50
  • No :3
  • Pages :44-52
  • Received Date : 2018-05-18
  • Revised Date : 2018-06-22
  • Accepted Date : 2018-06-25