The Moisture Content and Temperature Variation in Contact Drying Process of Paper

Zheng Mingliang

doi:10.7584/JKTAPPI.2019.10.51.5.98

All Issue

2019 Vol.51, Issue 5 Preview Page Next Page

The Moisture Content and Temperature Variation in Contact Drying Process of Paper

30 October 2019. pp. 98-104

PDF XML

Abstract

In order to reveal the change law of moisture content and temperature in drying technology of cylinder, then guiding the design of drying structure and reducing energy consumption. Based on the principle of conservation of mass, this paper establishes a mathematical model for the evaporation of held water at dry end during the contact drying process of paper; The analytical formula of water content is obtained by combining the fixed conditions; The effects of initial moisture content (initial dryness), air velocity and heat source temperature on moisture content and paper temperature in drying process are simulated. The results show that the size of parameters do not change the overall exponential decay trend of evaporation law, but they change the slope of attenuation in the decline stage of drying process. The initial moisture content is smaller, the absolute value of curve descending slope is greater, but the time needed for drying is longer; The air velocity is larger, the absolute value of curve descending slope is greater, and the time is shorter; The heat source temperature is higher, the drying rate is bigger, the time is shorter, the theoretical analysis is in line with the actual production process.

Keywords

Contact drying process of paper

held water

moisture content

paper temperature

References

Zhao, R. P. and He, P. D., The paper drying technology and its analysis on energy consumption, China Pulp & Paper Industry 35(16):10-14 (2014).

Reardon, S. A., Davis, M. R., and Doe, P. E., Friction, heat and mass transfer for paper drying, Int. J. Heat and Mass Transfer, 41(10):1313-1325 (1998).

10.1016/S0017-9310(97)00233-0

Chen, X. B., Li, J. G., Zhang, Z. B., Yin, Y. J., and Liu, H. B., Online measurement and analysis of drying curve of a high-strength corrugating medium machine, China Pulp & Paper, 33(8):7-13 (2014).

Shen, S. Q., Lu, T., and Li, S. F., Numerical simulation and analysis of drying process of paper in dryer section, Transactions of China Pulp and Paper, 18(1):119-122 (2003).

Shen, S. Q., Lu, T., and Li, S. F., A model for paper drying process computation based on the theory of heat and mass transfer in porous media, China Pulp & Paper, 22(4):22-25 (2003).

Yeo, Y. K., Hwang, K. S., Sung, C. Y., and Kang, H., Modeling of the drying process in paper plants, Korean Journal Chemical Engineering, 21(4):761-766 (2004).

10.1007/BF02705517

Etemoglu, A. B., Can, M., Avcı, A., and Pulat, E., Theoretical study of combined heat and mass transfer process during paper drying, Heat Mass Transfer, 41(5):419-427 (2005).

10.1007/s00231-004-0538-0

Wang, Z. S., Chen, K. F., Huang, L. H., and Kang, G. B., Mathematical model describing through-air drying process of paper, Journal of South China University of Technology (Natural Science Edition), 38(4):40-44 (2010).

Kong, L. B. Study on the mathematical model of heat and mass transfer in paper-drying process, Doctoral Dissertation, Institutes of Technology of South China, pp. 68-74 (2013).

Lin, Z. Z. Research on modeling of paper sheet drying, Master’s Dissertation, Institutes of Technology of South China, pp. 103-110 (2012).

Information

Publisher :Korea Technical Association of The Pulp and Paper Industry
Publisher(Ko) :한국펄프종이공학회
Journal Title :Journal of Korea TAPPI
Journal Title(Ko) :펄프종이기술
Volume : 51
No :5
Pages :98-104
Received Date : 2019-09-01
Revised Date : 2019-10-20
Accepted Date : 2019-10-25
DOI :https://doi.org/10.7584/JKTAPPI.2019.10.51.5.98

Journal of Korea TAPPI ISSN:0253-3200(Print) 펄프종이기술

All Issue