Journal of Korea TAPPI ISSN:0253-3200(Print) 펄프종이기술

Kinunen, K., Lehmonen, J., Beletski, N., Jetsu, P., and Hjelt, T., Benefits of foam foaming technology and its application in high MFC addition structures, In Advances in Pulp and Paper Research, Trans. of the 15th Fundamental Research Symposium, Cambridge, pp. 837-850 (2013).

Lehmonen, J., Jetsu, P., Kinnunen, K., and Hjelt, T., Potential of foam-laid forming technology in paper applications, Nordic Pulp & Paper J. 28(3):392-398 (2013).

Ostle, G., Foam forming and the future of papermaking, Paper360° September/October:30-32, 40 (2014).

Alimadadi, M. and Uesaka, T., 3D-oriented fiber networks made by foam forming, Cellulose 23:661-671 (2016).

Debeleac, C., Nechita, P., and Nastac, S., Computational investigations on soundproof applications of foam-formed cellulose materials, Polymers 11:1223 (2019).

Cucharero, J., Ceccherini, S., Maloney, T., Lokki, T., and Hänninen, T., Sound absorption properties of wood-based pulp fibre foams, Cellulose 28:4267-4279 (2021).

Nastac, S. M., Nechita, P., Guiman, M. V., Roman, M., and Rosca, I. C., Applications of xylan derivatives to improve the functional properties of cellulose foams for noise insulation, Polymers 15:4648 (2023).

Seciureanu, M., Nastac, S. M., Guiman, M. V., and Nechita, P., Cellulose fibers-based porous lightweight foams for noise insulation, Polymers 15:3796 (2023).

Valkonen, M. J., Cucharero, J., Lokki, T., Rautkari, L., and Hanninen, T., Preparation of fully bio-based sound absorbers from waste wood and pulp fibers by foam forming, BioResources 18(2):2657-2669 (2023).

Jahangiri, P., Korehei, R., Zeinoddini, S. S., Madani, A., Shama, Y., Phillion, A., Martinez, D. M., and Olson, J.A., On filtration and heat insulation properties of foam formed cellulose based materials, Nordic Pulp & Paper J. 29(4):584-591 (2014).

Pöhler, T., Jetsu, P., Fougerón, A., and Barraud, V., Use of papermaking pulps in foam-formed thermal insulation materials, Nordic Pulp & Paper J. 32(3):367-374 (2017).

Kiiskinen, H., Salminen, K., Lappalanen, T., Asikainen, J., Keränen, J., Hellém. E., Progress in foam forming technology, Tappi J. 18(8):499-510 (2019).

Ferreira, E. S., Dobrzanski, E., Tiwary, P., Agrawal, P., Chen, R., and Cranston, E. D., Insulative wood materials templated by wet foams, Materials Advances 4:641-650 (2023).

Asikainen, J., Saharinen, E., and Koponen, A., Dispersion of 24-mm staple fibers with foam, J. of Engineered Fibers and Fabrics 15:1-8 (2020).

Nechita, P. and Nastac, S.M., Overview on foam forming cellulose materials for cushioning packaging applications, Polymers 14:1963 (2022).

Madani, A., Zeinoddini, S., Varahmi, S., Turnbull, H., Phillion, A. B., Olson, J. A., and Martinez, D.M., Ultra-lightweight paper foams: Processing and properties, Cellulose 21:2023-2031 (2014).

Lehmonen, J., Retulainen, E., Paltakari, J., Kinnunen-Raudaskoski, K., and Koponen, A., Dewatering of foam-laid and water-laid structures and the formed web properties, Cellulose 27:1127-1146 (2020).

Park, G. H., Nam, S. H., Lee, W. G., Kim, H. H., Lee, S. G., and Cho, B. U., Effects of SDS dosage on properties of foam-formed HwBKP sheets and drainage, J. of Korea TAPPI 53(5):122-129 (2021).

Park, G. H., Kim, J. W., Kwon, S. Y., Jeong, D. H., Kim, Y. L., and Cho, B. U., Effects of beating degree on the properties of foam-formed SwBKP sheets, J. of Korea TAPPI 53(6):20-27 (2021).

Koponen, A., Torvinen, K., Jaäsberg, A., and Kiiskinen, H., Foam forming of long fibers, Nordic Pulp & Paper Research Journal 31(2):239-247 (2016).

Ketoja, J. A., Paunonen, S., Jetsu, P., and Pääkkönen, E., Compression strength mechanisms of low-density fibrous materials, Materials 12(384):ma12030384 (2019).

Lehmonen, J., Retulainen, E., Kraft, M., Paltakari, J., and Kinnunen-Raudaskoski, K., Foam forming under dynamic conditions, BioResources 15(3):6309-6331 (2020).

Kinnunen-Raudaskoski, K., Foam as a carrier phase - A multipurpose technology for industrial applications, Doctoral Dissertation, Aalto University, Finland (2017).

Paunonen, S., Timofeev, O., Torvinen, K., Turpeinen, T., and Ketoja, J.A., Improving compression recovery of foam-formed fiber materials, BioResources 13(2):4058-4074 (2018).

Pöhler, T., Ketoja, J. A., Lappalainen, T., Luukkainen, V.-M., Nurminen, I., Lahtinen, P., and Torvinen, K., On the strength improvement of lightweight fibre networks by polymers, fibrils and fines, Cellulose 27:6961-6976 (2020).

Noh, S. K., Choi, K. H., Kwak, J. W., and Lyoo, W. S. Preparation and application of poly(vinyl alcohol) having various molecular parameters, Polymer Science and Technology 15(1):4-11 (2004).

Hou, Q. and Wang, X., The effect of PVA foaming characteristics on foam forming, Cellulose 24:4939-4948 (2017).

Gottberg, J. M., Lappalainen, T., and Salminen, K., Polyvinyl alcohol as foaming agent in foam formed paper, Tappi J. 18(8):475-485 (2019).

Park, M. A., Oh, S. Y., Ahn, C. H., Park, M. J., and Cho, B. U., Effects of pulp type and stock concentration on foamability and bubble size of fiber foam, J. of Korea TAPPI 52(6):123-131 (2020).

Smith, M. K. and Punton, V. W., The role of the forming process in determining the structure and properties of paper, Pulp and Paper Canada 76(2):114-117 (1975).

Fatehi, P. and Xiao, H., Effect of cationic PVA characteristics on fiber and paper properties at saturation level of polymer adsorption, Carbohydrate Polymers 79(2):423-428 (2010).