Journal of Korea TAPPI ISSN:0253-3200(Print) 펄프종이기술

Rastogi, S. and Dwivedi, U. N., Manipulation of lignin in plants with special reference to O-methyltransferase, Plant Science 174(3):264-277 (2008).

Ragauskas, A. J., Beckham, G. T., Biddy, M. J., Chandra, R., Chen, F., Davis, M. F., Davison, B. H., Dixon, R. A., Gilna, P., and Keller, M., Lignin valorization: improving lignin processing in the biorefinery, science 344:6185 (2014).

Kumar, S., Mohanty, A., Erickson, L., and Misra, M., Lignin and its applications with polymers, Journal of Biobased Materials and Bioenergy 3(1):1-24 (2009).

Raj, A., Reddy, M. K., Chandra, R., Purohit, H. J., and Kapley, A., Biodegradation of kraft-lignin by Bacillus sp. isolated from sludge of pulp and paper mill, Biodegradation 18(6):783-792 (2007).

da Silva, E. B., Zabkova, M., Araújo, J., Cateto, C., Barreiro, M., Belgacem, M., and Rodrigues, A., An integrated process to produce vanillin and lignin-based polyurethanes from Kraft lignin, Chemical Engineering Research and Design 87(9):1276-1292 (2009).

Dörrstein, J., Scholz, R., Schwarz, D., Schieder, D., Sieber, V., Walther, F., and Zollfrank, C., Effects of high-lignin-loading on thermal, mechanical, and morphological properties of bioplastic composites, Composite Structures 189:349-356 (2018).

Wang, L., Lagerquist, L., Zhang, Y., Koppolu, R., Tirri, T., Sulaeva, I., Schoultz, S. v., Vähäsalo, L., Pranovich, A., and Rosenau, T., Tailored Thermosetting Wood Adhesive Based on Well-Defined Hardwood Lignin Fractions, ACS Sustainable Chemistry & Engineering 8(35):13517-13526 (2020).

Wang, B., Shi, T., Zhang, Y., Chen, C., Li, Q., and Fan, Y., Lignin-based highly sensitive flexible pressure sensor for wearable electronics, Journal of Materials Chemistry C 6(24):6423-6428 (2018).

Vishtal, A. G. and Kraslawski, A., Challenges in industrial applications of technical lignins, BioResources 6(3):3547-3568 (2011).

Sakakibara, A., A structural model of softwood lignin, Wood Science and Technology 14(2):89-100 (1980).

Prado, R., Erdocia, X., and Labidi, J., Lignin extraction and purification with ionic liquids, Journal of Chemical Technology & Biotechnology 88(7):1248-1257 (2013).

Garg, A., Mishra, I., and Chand, S., Effectiveness of coagulation and acid precipitation processes for the pre-treatment of diluted black liquor, Journal of hazardous materials 180(1-3):158-164 (2010).

da Silva, S. H. F., Gordobil, O., and Labidi, J., Organic acids as a greener alternative for the precipitation of hardwood kraft lignins from the industrial black liquor, International journal of biological macromolecules 142:583-591 (2020).

Velez, J. and Thies, M. C., Solvated liquid-lignin fractions from a Kraft black liquor, Bioresource technology 148:586-590 (2013).

Ko, J. -J., Shimizu, Y., Ikeda, K., Kim, S. -K., Park, C. -H., and Matsui, S., Biodegradation of high molecular weight lignin under sulfate reducing conditions: lignin degradability and degradation by-products, Bioresource technology 100(4):1622-1627 (2009).

Kouisni, L., Gagné, A., Maki, K., Holt-Hindle, P., and Paleologou, M., LignoForce system for the recovery of lignin from black liquor: feedstock options, odor profile, and product characterization, ACS Sustainable Chemistry & Engineering 4(10):5152-5159 (2016).

Yuan, T. -Q., Sun, S. -N., Xu, F., and Sun, R. -C., Characterization of lignin structures and lignin–carbohydrate complex (LCC) linkages by quantitative 13C and 2D HSQC NMR spectroscopy, Journal of agricultural and food chemistry 59(19):10604-10614 (2011).

Botello, J., Gilarranz, M., Rodríguez, F., and Oliet, M., Recovery of solvent and by-products from organosolv black liquor, Separation Science and Technology 34(12):2431-2445 (1999).

Akgul, M. and Kirci, H., An environmentally friendly organosolv (ethanol-water) pulping of poplar wood, Journal of environmental biology 30(5):735 (2009).

Demuner, I. F., Colodette, J. L., Demuner, A. J., and Jardim, C. M., Biorefinery review: Wide-reaching products through kraft lignin, BioResources 14(3):7543-7581 (2019).

Kim, K. -J., Hong, S. -B., and Eom, T. -J., Preparation of Eucalyptus pulp by mild condition of low-temperature, atmospheric pressure, and short-reaction-time with high-boiling-point solvent and pulp properties, Cellulose 25(1):753-761 (2018).

Kim, K. -J., Nah, G. -B., Ryu, J. -A., and Eom, T. -J., Low temperature, atmospheric pressure and short reaction time (LAS) pulping of Korean mixed oak with glycol ether, Journal of Korea TAPPI 50(2):44-51 (2018).

Zhu, W. and Theliander, H., Precipitation of lignin from softwood black liquor: an investigation of the equilibrium and molecular properties of lignin, BioResources 10(1):1696-1714 (2015).

dos Santos, P. S., Erdocia, X., Gatto, D. A., and Labidi, J., Characterisation of Kraft lignin separated by gradient acid precipitation, Industrial crops and products 55:149-154 (2014).

Ibrahim, M. M., Chuah, S., and Rosli, W. W., Characterization of lignin precipitated from the soda black liquor of oil palm empty fruit bunch fibers by various mineral acids, ASEAN Journal on Science and Technology for Development 21(1):57-67 (2004).

Zhu, W., Westman, G., and Theliander, H., The molecular properties and carbohydrate content of lignins precipitated from black liquor, Holzforschung 69(2):143-152 (2015).

Chakar, F. S. and Ragauskas, A. J., Review of current and future softwood kraft lignin process chemistry, Industrial Crops and Products 20(2):131-141 (2004).

Barabel, M., Huault, I., and Meier, O., Changing nature and sustainability of the industrial district model: the case of Technic Valley in France, Growth and Change 38(4):595-620 (2007).

Andeme Ela, R. C., Spahn, L., Safaie, N., Ferrier Jr, R. C., and Ong, R. G., Understanding the effect of precipitation process variables on hardwood lignin characteristics and recovery from black liquor, ACS Sustainable Chemistry & Engineering 8(37):13997-14005 (2020).