Study of Mixed Refining Behaviors of Softwood Kraft Pulps and Hardwood Kraft Pulps Using Different Bar Fillings

Ji-Young Lee; Chul-Hwan Kim; Sol Kwon; Hyeung-Hun Park; Hyun-Tek Yim; Ho-Gyeong Gu; Byung-Gul Min

doi:10.7584/JKTAPPI.2018.10.50.5.31

All Issue

2018 Vol.50, Issue 5 Preview Page Next Page

Study of Mixed Refining Behaviors of Softwood Kraft Pulps and Hardwood Kraft Pulps Using Different Bar Fillings

30 October 2018. pp. 31-38

PDF XML

Abstract

Mixed refining using a narrow and coarse bar filling was applied to the mixing furnishes of long fibers and short fibers. According to different bar fillings, pure HwBKP in the narrow filling showed a faster drop in freeness than the mixed furnishes, and pure SwBKP in the coarse filling showed the slowest drop, differently from the mixed furnish. The mixed furnishes with more long fibers caused their mean fiber lengths to be shorter in both plate fillings. The increase of water retention values in the mixing furnishes was more affected by the amount of short fibers in the mixed furnish, not by the plate filling types. For physical properties of paper according to co-refining, better improvement was acquired in the coarse filling rather than in the narrow filling. In particular, the amount of long fibers in the mixed furnish contributed to the better improvement of physical properties in the same refining energy regardless of the plate fillings. Finally, it could be concluded that refining of mixed furnishes preferred the coarser bar filling to the narrower bar filling in developing fiber and paper properties.

Keywords

Co-refining

coarse filling

narrow filling

physical properties

refining energy

References

Literature Cited

D. C. McIntosh, Tappi J, The effect of refining on the structure of the fiber wall, 50(10); 482-488 (1967)

McIntosh, D. C., The effect of refining on the structure of the fiber wall, Tappi J. 50(10): 482-488 (1967).

D. H. Page, The beating of chemical pulps – the action and the effectsFundamentals of Papermaking, Transactions of the 9th fundamental research symposium held at Cambridge; 1-37

Page, D. H., The beating of chemical pulps – the action and the effects, Fundamentals of Papermaking, Transactions of the 9th fundamental research symposium held at Cambridge, Sept., 1989, pp. 1-37.

H. W. Giertz, The effects of beating on individual fibers, Fundamentals of Papermaking FibresTransactions of the symposium held at Cambridge; 389-409

Giertz, H. W., The effects of beating on individual fibers, Fundamentals of Papermaking Fibres, Transactions of the symposium held at Cambridge, Sept. 1957, pp. 389-409.

J. Y. Lee, C. H. Kim, S. Kwon, H. H. Park, H. T. Yim, H. G. Gu, B. G. Min and J. K. Yang, Journal of Korea TAPPI, Study of refining behaviors of hardwood bleached kraft pulp using domestic casting plates with different pattern designs, 49(6); 36-43 (2018)

Lee, J. Y., Kim, C. H., Kwon, S., Park, H. H., Yim, H. T., Gu, H. G., Min, B. G., Yang, J. K., Study of refining behaviors of hardwood bleached kraft pulp using domestic casting plates with different pattern designs, Journal of Korea TAPPI 49(6):36-43 (2018).

J. Y. Lee, C. H. Kim, H. H. Park, S. Kwon, H. T. Yim, H. G. Gu and B. G Min, Journal of Korea TAPPI, Change of physical properties of softwood bleached kraft pulp by domestic plates with harsh and gentle refining intensity, 49(6); 46-53 (2017)

Lee, J. Y., Kim, C. H., Park, H. H., Kwon, S., Yim, H. T., Gu, H. G., and Min, B. G, Change of physical properties of softwood bleached kraft pulp by domestic plates with harsh and gentle refining intensity, Journal of Korea TAPPI 49(6):46-53 (2017).

10.7584/jktappi.2017.12.49.6.46

S. Kwon, C. H. Kim, J. Y. Lee, H. H. Park, H. T. Yim, H. G. Gu and B. G Min, Journal of Korea TAPPI, Refining effects on pulp fibers and physical properties of paper using domestic refiner plates, 49(6); 13-21 (2017)

Kwon, S., Kim, C. H., Lee, J. Y., Park, H. H., Yim, H. T., Gu, H. G., and Min, B. G, Refining effects on pulp fibers and physical properties of paper using domestic refiner plates, Journal of Korea TAPPI 49(6):13-21 (2017).

10.7584/jktappi.2017.12.49.6.13

K. Olejnik, Bioresources, Impact of pulp consistency on refining process conducted under constant intensity determined by SEL and SEC factors, 8(3); 3212-3230 (2013)

Olejnik, K., Impact of pulp consistency on refining process conducted under constant intensity determined by SEL and SEC factors, Bioresources 8(3):3212-3230 (2013).

10.15376/biores.8.3.3212-3230

F. Wultsch and W. Fluche, Das Papier, The Escher-Wyss mini-refiner as a standard tester for modern stock preparation issues, 12(13); 334-342 (1958)

Wultsch, F. and Fluche, W., The Escher-Wyss mini-refiner as a standard tester for modern stock preparation issues, Das Papier, 12(13): 334-342 (1958).

W. Brecht and W. H. Siewert, Das Papier, For the theoretical assessment of the refining process of modern refining machines, 20(1); 4-14 (1966)

Brecht, W. and Siewert, W. H., For the theoretical assessment of the refining process of modern refining machines, Das Papier, 20(1): 4-14 (1966).

R. J. Kerekes and J. J. Senger, J. of Pulp and Paper Science, Characterizing refining action in low-consistency refining by forces on fibers, 32(1); 1-8 (2006)

Kerekes, R. J. and Senger, J. J., Characterizing refining action in low-consistency refining by forces on fibers, J. of Pulp and Paper Science 32(1):1-8 (2006).

W. J. Batchelor, T. Lundin and P. Fardim, Tappi J, A method to estimate fiber trapping in low consistency refining, 5(8); 31-36 (2006)

Batchelor W. J., Lundin T., and Fardim P., A method to estimate fiber trapping in low consistency refining, Tappi J. 5(8):31-36 (2006).

Information

Publisher :Korea Technical Association of The Pulp and Paper Industry
Publisher(Ko) :한국펄프종이공학회
Journal Title :Journal of Korea TAPPI
Journal Title(Ko) :펄프종이기술
Volume : 50
No :5
Pages :31-38
Received Date : 2018-09-06
Revised Date : 2018-10-04
Accepted Date : 2018-10-05
DOI :https://doi.org/10.7584/JKTAPPI.2018.10.50.5.31

Journal of Korea TAPPI ISSN:0253-3200(Print) 펄프종이기술

All Issue

Literature Cited