Journal of Korea TAPPI ISSN:0253-3200(Print) 펄프종이기술

Lu, H., Zhang, L., Shi, Y., Ma, J., and Zhou, X., Fabrication of composite ultrafiltration membrane by coating urea formaldehyde resin on filter paper, Coatings 10(5):482 (2020).

Mel, M., Abdeen, F. R. H., and Sopyan, I., Fabrication of ceramic membrane chromatography for biologics purification, IIUM Engineering Journal 12(4):115-124. (2011).

Iqbal, D. N., Munir, A., Abbas, M., Nazir, A., Ali, Z., Alshawwa, S. Z., Iqbal, M., and Ahmad, N., Polymeric membranes of chitosan/aloe vera gel fabrication with enhanced swelling and antimicrobial properties for biomedical applications, Dose-Response 21(2):155932582311693 (2023).

Bint-E-Naser, S. F., Mohamed, Z. J., Chao, Z., Bali, K., Owens, R. M., and Daniel, S., Gram-positive bacterial membrane-based biosensor for multimodal investigation of membrane-antibiotic interactions, Biosensors 14(1):45 (2024).

Xu, K., Qin, Y., Xu, T., Xie, X., Deng, J., Qi, J., and Huang, C., Combining polymeric membranes with inorganic woven fabric: Towards the continuous and affordable fabrication of a multifunctional separator for lithium-ion battery, Journal of Membrane Science 592:117364 (2019).

Bicy, K., Kalarikkal, N., Stephen, A. M., Rouxel, D., and Thomas, S., Facile fabrication of microporous polypropylene membrane separator for lithium-ion batteries, Materials Chemistry and Physics 255(21):123473 (2020).

Ma. Y., Zhao, X., and He, B., Fabrication of nanoparticle array membranes by integrating semi-crystalline polymer self-assembly with NIPS for water treatment, Nanoscale Advances 6(14):3543-3552 (2024).

Yoon, Y. H., Fabrication of porous titania (TiO₂) thin films with a high specific surface area using nano-cellulose and analysis of their characteristics, Master's Thesis, Sejong University (2018).

Hou, T., Li, X., Lu, Y., Zhou, J., Zhang, X., Liu, S., and Yang, B., Fabrication of hierarchical porous ethyl cellulose fibrous membrane by electro-centrifugal spinning for drug delivery systems with excellent integrated properties, International Journal of Biological Macromolecules 242(1-2):125141 (2023).

Shin, D. J., Facile fabrication of defect-free metal-organic framework (MOF) membranes via interfacial synthesis for biofuel purification, Master's Thesis, Seoul National University (2024).

Jiang, Z., Wang, X., Zhao, H., Yang, Z., Zhou, J., Sun, X., Yang, H., Wang, C., and Huan, S., Micro/nano-plastic removal from wastewater using cellulose membrane: Performance and life cycle assessment, Separation and Purification Technology 317:123925 (2023).

Fatima, A., Albo, P. O., Neves, L., Nascimento, F. X., and Crespo, J., Biosynthesis and characterization of bacterial cellulose membranes presenting relevant characteristics for air/gas filtration, Journal of Membrane Science 674:121509 (2023).

Kafle, L., Study on fabrication and characterization of cellulose electrospun membrane for bio-filtration, Master's Thesis, Jeonbuk National University (2019).

Klemm, D., Heublein, B., Fink, H. P., and Bohn, A., Cellulose: Fascinating biopolymer and sustainable raw material, Angewandte Chemie Internatinoal Edition 44(22):3358-3393 (2005).

Jeong, E. S., Shin, S. C., Lee, J. G., Youn, H. J., and Hyun, J. H., Electrospun bilayer of poly(vinyl alcohol)/cellulose triacetate fibers for reinforcement of paper, Journal of Korea TAPPI 50(4):5-14 (2018).

Hardian, R., Alammar, A., Höltzl, T., and Szekely, G., Fabrication of sustainable organic solvent nanofiltration membranes using cellulose-chitosan biopolymer blends, Journal of Membrane Science 658:120743 (2022).

Palanisamy, G., Im, Y. M., Muhammed, A. P., Palanisamy, K., Thangarasu, S., and Oh, T. H., Fabrication of cellulose acetate-based proton exchange membrane with sulfonated SiO₂ and plasticizers for microbial fuel cell applications, Membranes 13(6):581 (2023).

Nezam El-Din, L. A., El-Gendi, A., Ismail, N., Abed, K. A., and Ahmed, A. I., Evaluation of cellulose acetate membrane with carbon nanotubes additives, Journal of Industrial and Engineering Chemistry 26:259-264 (2015).

Kim, S. G., Lee, D. K., Seo, J. H., Gwon, J. G., and Chun, S. J., Characterization of cellulose acetate-based derivative films with addition of polyethylene glycol using breath figure array method, Journal of Korea TAPPI 56(6):51-58 (2024).

Wang, W., Li, L., Jin, S., Wang, Y., Lan, G., and Chen, Y., Study on cellulose acetate butyrate/plasticizer systems by molecular dynamics simulation and experimental characterization, Polymers 12(6):1272 (2020).

Ali, S. F. A., William, L. A., and Fadl, E. A., Cellulose acetate, cellulose acetate propionate and cellulose acetate butyrate membranes for water desalination applications, Cellulose 27(4):1-19 (2020).

Lee, R. J., Jawad, Z. A., Chua, H. B., and Ahmad, A. L., Blend Cellulose acetate butyrate/functionalised multi-walled carbon nanotubes mixed matrix membrane for enhanced CO₂/N₂ separation with kinetic sorption study, Journal of Environmental Chemical Engineering 8(5):104212 (2020).

Marques, M. S., Zepon, K. M., Petronilho, F. C., Soldi, V., and Kanis, L. A., Characterization of membranes based on cellulose acetate butyrate/poly(caprolactone) triol/doxycycline and their potential for guided bone regeneration application, Materials Science and Engineering 76(1):365-373 (2017).

Porter, R. S. and Johnson, J. F., The entanglement concept in polymer systems, Chemical Reviews, 66(1):1-27 (1965).

Gao, Q. and Wan, A., Effects of molecular weight, degree of acetylation and ionic strength on surface tension of chitosan in dilute solution, Carbohydrate Polymers 64(1):29-36 (2006).

Perkins, W. G., Capiati, N. J., and Porter, R. S., The effect of molecular weight on the physical and mechanical properties of ultra-drawn high density polyethylene, Polymer Engineering and Science 16(3):200-203 (1976).