All Issue

2019 Vol.51, Issue 2 Preview Page
Studies on the Characteristics of CNF from Paper Mulberry Bast Fiber
Sung-Jun Hwang
,
Hyoung-Jin Kim†
Kookmin University Industry-Academic Cooperation Foundation, Kookmin University, Seoul, 136-702
†Corresponding author: E-Mail: hyjikim@kookmin.ac.kr
30 April 2019. pp. 88-99
PDF XML Citation
Abstract

Cellulose nanofiber (CNF) has a wide range of applications due to its advantageous properties, including renewability, biodegradability, high mechanical strength, dimensional stability, thermal stability, and high resistance to water. Consequently, much research is focused on its development and improvement. CNF is obtained most widely from both softwood and hardwood, but it can be also be sourced from non-wood based materials and micro organisms. However, improved living standard and economic growth combine to raise the price of wood annually, coinciding with increased production of wood products such as paper, tissue, wrapper, etc. Thus the use of non-wood based materials as an alternative to wood pulp is increasing in a variety of industries all over the world. In this study, we analyzed CNF manufactured from paper mulberry bast fiber in order to confirm its applicability to various industries. After pre-treatment of the paper mulberry bast pulp, a wet disk-mill and high pressure homogenizer (HPH) were employed sequently to manufacture CNF, which was then characterized by scanning electron microscopy (SEM), thermogravimetric analysis (TGA), derivative thermogravimetry (DTG), and X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR), and the degree of polymerization (DP), tensile strength and elongation were measured. We conclude that it is feasible to manufacture high quality CNF from paper mulberry bast fiber.

Keywords
HwBKP
paper mulberry bast fiber
CNF
WDM
HPH
References

Literature Cited

1
Korea Forest Service, The wood industry buildup mast plan (2012-2016) (2011)

Korea Forest Service, The wood industry buildup mast plan (2012-2016) (2011).

2
S. Rezanezhad, N. Nazanezhad and G. Asadpur, Lignocellulose, Isolation of nanocellulose from rice waste via ultrasonication, 2(1); 282-291 (2013)

Rezanezhad, S., Nazanezhad, N., and Asadpur, G., Isolation of nanocellulose from rice waste via ultrasonication, Lignocellulose 2(1):282-291 (2013).

3
H. P. S. Abdul Khalil, A. H. Bhat and A. F. Ireana Yusra, Carbohydrate Polymer, Green composites from sustainable cellulose nanofibrils: A review, 87(2); 963-979 (2012)

Abdul Khalil, H. P. S., Bhat, A. H., and Ireana Yusra, A. F., Green composites from sustainable cellulose nanofibrils: A review, Carbohydrate Polymer 87(2):963-979 (2012).

10.1016/j.carbpol.2011.08.078
4
Second edition. The global market for nanocellulose to 2017, Edinburgh, UK. Future Market Inc.. (2012)

The global market for nanocellulose to 2017, Technology Report NO. 60, Second edition, Future Market Inc., Edinburgh, UK (2012).

5
S. H. Lee, N. S. Cho, S. K. Oh and T. H. Choi, Anatomical characteristics of the paper mulberry bast fibers by different local habitatProceeding of 2007 Korea TAPPI Spring Conference, Chuncheon, Korea; 298-303 (2007)

Lee, S. H., Cho, N. S., Oh, S. K., and Choi, T. H., Anatomical characteristics of the paper mulberry bast fibers by different local habitat, Proceeding of 2007 Korea TAPPI Spring Conference, Chuncheon, Korea, pp. 298-303 (2007).

6
S. H. Jeong, Korean Journal of Cultural Heritage Studies, A study on manufacturing technologies and excellence of Korean traditional paper, 48(1); 96-131 (2015)

Jeong, S. H., A study on manufacturing technologies and excellence of Korean traditional paper, Korean Journal of Cultural Heritage Studies 48(1):96-131 (2015).

7
S. L. Yoon, H. J. Jo, S. B. Park, H. J. Kim, J. K. Kim and S. I. Kim, Mokchae Konghak, Studies on wallpaper making using Hanji - Making and properties of Hanji for wallpaper, 24(4); 15-21 (1996)

Yoon, S. L., Jo, H. J., Park, S. B., Kim, H. J., Kim, J. K., and Kim, S. I., Studies on wallpaper making using Hanji - Making and properties of Hanji for wallpaper, Mokchae Konghak 24(4):15-21 (1996).

8
S. H. Jeong, Korean Journal of Cultural Heritage Studies, A study on manufacturing technologies and excellence of Korean traditional paper, 48(1); 96-131 (2015)

Jeong, S. H., A study on manufacturing technologies and excellence of Korean traditional paper, Korean Journal of Cultural Heritage Studies 48(1):96-131 (2015).

9
T. H. Choi and N. S. Cho, Journal of Korea TAPPI, New Korean traditional papermaking from paper mulberry (I), 28(1); 49-59 (1996)

Choi, T. H. and Cho, N. S., New Korean traditional papermaking from paper mulberry (I), Journal of Korea TAPPI 28(1):49-59 (1996).

10
J. H. Seo and H, J. Kim, Journal of Korea TAPPI, Component analysis of paper mulberry bark for the automation of bark peeling process, 43(1); 74-82 (2011)

Seo, J. H. and Kim, H, J., Component analysis of paper mulberry bark for the automation of bark peeling process, Journal of Korea TAPPI 43(1):74-82 (2011).

11
O. H. Kwon and H. C. Kim, Journal of Korea TAPPI, Preliminary study on automation of bark peeling process for paper mulberry, 43(4); 59-66 (2011)

Kwon, O. H. and Kim, H. C., Preliminary study on automation of bark peeling process for paper mulberry, Journal of Korea TAPPI 43(4):59-66 (2011).

12
L. Segal, J. J. Crelly, A. E. Martin Jr. and C. M. Conrad, Textile Research Journal, An empirical method for estimating the degree of crystallinity of native cellulose using the x-ray diffractometer, 29(10); 786-794 (1959)

Segal. L., Crelly, J. J., Martin, A. E. Jr., and Conrad, C. M., An empirical method for estimating the degree of crystallinity of native cellulose using the x-ray diffractometer, Textile Research Journal 29(10):786-794 (1959).

10.1177/004051755902901003
13
A. Monshi, M. R. Foroughi and M. R. Monshi, World Journal of Nano Science and Engineering, Modified Scherrer equation to estimate more accurately nano-crystallite size using XRD, 2(3); 154-160 (2012)

Monshi, A., Foroughi, M. R., and Monshi, M. R., Modified Scherrer equation to estimate more accurately nano-crystallite size using XRD, World Journal of Nano Science and Engineering 2(3):154-160 (2012).

10.4236/wjnse.2012.23020
14
M. R. Kasaai, Carbohydrate Polymer, Calculation of Mark-Houwink-Sakurada (MHS) equation viscometric constants for chitosan in any solvent-temperature system using experimental reported viscometric constants data, 68(3); 477-488 (2007)

Kasaai, M. R., Calculation of Mark-Houwink-Sakurada (MHS) equation viscometric constants for chitosan in any solvent-temperature system using experimental reported viscometric constants data, Carbohydrate Polymer 68(3):477-488 (2007).

10.1016/j.carbpol.2006.11.006
15
Y. Habibi, L. A. Lucia and O. J. Rojas, Chemical Reviews, Cellulose nanocrystals: Chemistry, self-assembly, and application, 110(6); 3479-3500 (2010)

Habibi, Y., Lucia, L. A., and Rojas, O. J., Cellulose nanocrystals: Chemistry, self-assembly, and application, Chemical Reviews 110(6):3479-3500 (2010).

10.1021/cr900339w
16
B. Xiao, X. F. Sun and R. Sun, Polymer Degradation and Stability, Chemical, structural, and thermal characterizations of alkali-soluble lignins and hemicelluloses, and cellulose from maize stems, rye straw, and rice straw, 74(2); 307-319 (2001)

Xiao, B., Sun, X. F., and Sun, R., Chemical, structural, and thermal characterizations of alkali-soluble lignins and hemicelluloses, and cellulose from maize stems, rye straw, and rice straw, Polymer Degradation and Stability 74(2):307-319 (2001).

10.1016/s0141-3910(01)00163-x
17
I. Y. Fatah, H. P. S. Abdul Khalil, M. S. Hossain, A. Aziz, Y. Davoudpour, R. Dungani and A. Bhat, Polymers, Exploration of a chemo-mechanical technique for the isolation of nanofibrillated cellulosic fiber from oil palm empty fruit bunch as a reinforcing agent in composites materials, 6(10); 2611-2624 (2014)

Fatah, I. Y., Abdul Khalil, H. P. S., Hossain, M. S., Aziz, A., Davoudpour, Y., Dungani, R., and Bhat, A., Exploration of a chemo-mechanical technique for the isolation of nanofibrillated cellulosic fiber from oil palm empty fruit bunch as a reinforcing agent in composites materials, Polymers 6(10):2611-2624 (2014).

10.3390/polym6102611
18
M. Mayra, L. S. Lucimara, D. Nelson and T. Ljubica, Molecules, Enhanced materials from nature: Nanocellulose from citrus waste, 20; 5908-5923 (2015)

Mayra, M., Lucimara, L. S., Nelson, D., and Ljubica T., Enhanced materials from nature: Nanocellulose from citrus waste, Molecules, 20:5908-5923 (2015).

19
D. Kazuho, S. Tsuguyuki, F. Shuji and I. Akira, Applied Nano Materials, The crystallinity of nanocellulose: Dispersion-induced disordering of the grain boundary in biologically structured cellulose, 1(10); 5774-5785 (2018)

Kazuho, D., Tsuguyuki, S., Shuji, F., and Akira, I., The crystallinity of nanocellulose: Dispersion-induced disordering of the grain boundary in biologically structured cellulose, Applied Nano Materials 1(10):5774-5785 (2018).

20
S. Y. Lee, S. J. Chun, I. A. Kang and J. Y. Park, Journal of Industrial and Engineering Chemistry, Preparation of cellulose nanofibrils by high-pressure homogenizer and cellulose-based composite films, 15(1); 50-55 (2009)

Lee, S. Y., Chun, S. J., Kang, I. A., and Park, J. Y., Preparation of cellulose nanofibrils by high-pressure homogenizer and cellulose-based composite films, Journal of Industrial and Engineering Chemistry 15(1):50-55 (2009).

10.1016/j.jiec.2008.07.008
21
K. Anuj, S. N. Yuvraj, C. Veena and K. B. Nishi, Journal of Materials Physics and Chemistry, Characterization of cellulose nanocrystals produced by acid-hydrolysis from sugarcane bagasse as agro-waste, 2(1); 1-8 (2014)

Anuj, K., Yuvraj, S. N., Veena, C., and Nishi, K. B., Characterization of cellulose nanocrystals produced by acid-hydrolysis from sugarcane bagasse as agro-waste, Journal of Materials Physics and Chemistry 2(1):1-8 (2014).

22
K. Missoum, M. N. Belgacem and J. Bras, Materials, Nanofibrillated cellulose surface modification: A review, 6(5); 1745-1766 (2013)

Missoum, K., Belgacem, M. N., and Bras, J., Nanofibrillated cellulose surface modification: A review, Materials 6(5):1745-1766 (2013).

10.3390/ma6051745
Information
  • Publisher :Korea Technical Association of The Pulp and Paper Industry
  • Publisher(Ko) :한국펄프종이공학회
  • Journal Title :Journal of Korea TAPPI
  • Journal Title(Ko) :펄프종이기술
  • Volume : 51
  • No :2
  • Pages :88-99
  • Received Date : 2019-03-14
  • Revised Date : 2019-04-11
  • Accepted Date : 2019-04-19
  • DOI :https://doi.org/10.7584/JKTAPPI.2019.04.51.2.88
Journal Informaiton Journal of Korea TAPPI Journal of Korea TAPPI
Online Submission
  • scopus
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crosscheck
  • orcid
Journal Informaiton Journal Informaiton - close