All Issue

2016 Vol.48, Issue 5 Preview Page
30 October 2016. pp. 37-44
Abstract
References

References

1
M. Nazhad, P. Stoere and R. Kerekes, Tappi J, An experimental study of the effect of refining on paper formation, 84(7); 1-9 (2001)

Nazhad, M., Stoere, P., and Kerekes, R., An experimental study of the effect of refining on paper formation, Tappi J. 84(7):1-9 (2001).

2
R. J. Kerekes and J. J. Senger, J. of Pulp and Paper Science, Characterizing refining action in low-consistency refining by forces on fibers, 32(1); 1-8 (2006)

Kerekes, R. J. and Senger, J. J., Characterizing refining action in low-consistency refining by forces on fibers, J. of Pulp and Paper Science 32(1):1-8 (2006).

3
D. H. Page, C. F. Baker and (ed.) V. W. Punton, The beating of chemical pulps — The action and the effectsIn Papermaking Raw Materials, Transactions of the 9th Fundamental Research Symp, Vol. 1; 1-37, London, UK. Mechanical Engineering Publications Ltd. (1989)

Page, D. H., The beating of chemical pulps — The action and the effects, In Papermaking Raw Materials, Transactions of the 9th Fundamental Research Symp. Vol. 1, Baker, C. F. and Punton, V. W. (ed.), Mechanical Engineering Publications Ltd., London, UK, pp. 1-37 (1989).

4
H. Giertz, The influence of beating on individual fibers and the causal effects on paper propertiesProc. International Symposium on Fundamental Concepts of Refining, Institute of Paper Chemistry, Appleton, USA; 87-92 (1980)

Giertz, H., The influence of beating on individual fibers and the causal effects on paper properties, Proc. International Symposium on Fundamental Concepts of Refining, Institute of Paper Chemistry, Appleton, USA, pp. 87-92 (1980).

5
J. d’A. Clark, Tappi J, The evaluation of beating equipment, 40; 548-552 (1957)

Clark, J. d’A., The evaluation of beating equipment, Tappi J. 40:548-552 (1957).

6
K. Ebeling, Proc. International Symposium on Fundamental Concepts of Refining, A critical review of current theories for the refining of chemical pulps; 1-36, Appleton, USA. Institute of Paper Chemistry. (1980)

Ebeling, K., A critical review of current theories for the refining of chemical pulps, Proc. International Symposium on Fundamental Concepts of Refining, Institute of Paper Chemistry, Appleton, USA, pp. 1-36 (1980).

7
M. I. Stationwala, D. Atack, J. R. Wood, D. J. Wild and A. Karnis, Paperi jaa Puu, The effect of control variables on refining zone conditions and pulp properties, 73(1); 62-69 (1991)

Stationwala, M. I., Atack, D., Wood, J. R., Wild, D. J., and Karnis, A., The effect of control variables on refining zone conditions and pulp properties, Paperi jaa Puu 73(1):62-69 (1991).

8
W. J. Batchelor, D. M. Martinez, R. J. Kerekes and D. Ouellet, J. of Pulp and Paper Science, Forces on fibers in low consistency refining: Shear force, 23(1); J40-J45 (1997)

Batchelor, W. J., Martinez, D. M., Kerekes, R. J., and Ouellet, D., Forces on fibers in low consistency refining: Shear force. J. of Pulp and Paper Science 23(1):J40-J45 (1997).

9
M. D. Fahey, Tappi J, Mechanical treatment of chemicals pulp, 53(11); 2050-2064 (1970)

Fahey, M. D., Mechanical treatment of chemicals pulp, Tappi J. 53(11):2050-2064 (1970).

10
P. J. Leider and A. H. Nissan, Tappi J, Understanding a disk refiner, 60(10); 85-89 (1977)

Leider, P. J. and Nissan, A. H., Understanding a disk refiner, Tappi J. 60(10):85-89 (1977).

11
K. Koskenhely, K. Nieminen, E. Hiltunen and H. Paulapuro, Paperi ja Puu, Comparison of plate and conical fillings in refining of bleached softwood and hardwood pulps, 87(7); 458-463 (2005)

Koskenhely, K., Nieminen, K., Hiltunen, E., and Paulapuro, H., Comparison of plate and conical fillings in refining of bleached softwood and hardwood pulps, Paperi ja Puu 87(7):458-463 (2005).

12
S. Hietanen and K. Ebeling, Paperi Puu, Fundamental aspects of the refining process, 72(2); 158-170 (1990)

Hietanen, S. and Ebeling, K., Fundamental aspects of the refining process, Paperi Puu 72(2):158-170 (1990).

13
J. E. Stone, A. M. Scallan and B. Abrahamson, Svensk Papperstidning, Influence of beating on cell wall swelling and internal fibrillation, 71(19); 687-694 (1968)

Stone, J. E., Scallan, A. M., and Abrahamson, B., Influence of beating on cell wall swelling and internal fibrillation, Svensk Papperstidning 71(19):687-694 (1968).

14
H. Lindqvist, K. Salminen, J. Kataja-aho, E. Retulainen, - P. Fardim and A. Sundberg, The effect of fines on dewatering, wet and dry web propertiesProc. 2011 PaperCon, Cincinnati, USA; 887-895 (2011)

Lindqvist, H., Salminen, K., Kataja-aho, J., Retulainen, E., Fardim,- P., and Sundberg, A., The effect of fines on dewatering, wet and dry web properties, Proc. 2011 PaperCon, Cincinnati, USA, pp. 887-895 (2011).

15
M. Htun and Ruvo, A. de, Svensk Papperstidning, The implication of the fines fraction for the properties of bleached kraft sheet, 81(16); 507-510 (1976)

Htun, M. and de Ruvo, A., The implication of the fines fraction for the properties of bleached kraft sheet, Svensk Papperstidning 81(16):507-510 (1976).

16
P. J. Ferreira, A. A. Martins and M. M. Figueiredo, Paperi ja Puu, Primary and secondary fines from Eucalyptus globulus kraft pulps - Characterization and infuence, 82(6); 403-408 (2000)

Ferreira, P. J., Martins, A. A., and Figueiredo, M. M., Primary and secondary fines from Eucalyptus globulus kraft pulps - Characterization and infuence, Paperi ja Puu 82(6):403-408 (2000).

Information
  • Publisher :Korea Technical Association of The Pulp and Paper Industry
  • Publisher(Ko) :한국펄프종이공학회
  • Journal Title :Journal of Korea TAPPI
  • Journal Title(Ko) :펄프종이기술
  • Volume : 48
  • No :5
  • Pages :37-44
  • Received Date : 2016-09-19
  • Revised Date : 2016-10-05
  • Accepted Date : 2016-10-07