Literature Cited
Radvan, B. and Gatward, A. P. J., The formation of wet-laid webs by a foaming process, Tappi J. 55(5):743-751 (1972).
Smith, M. K. and Punton, V. W., The role of the forming process in determining the structure and properties of paper, Pulp and Paper Canada 76(2):114-117 (1975).
Smith, M. K., Punton, V. W., and Rixon, A. G., The structure and properties of paper formed by a foaming process, Tappi J. 57(1):107-111 (1974).
Lehmonen, J., Jetsu, P., Kinnunen, K., and Hjelt, T., Potential of foam-laid forming technology in paper applications, Nordic Pulp and Paper Research Journal 28(3):392-398 (2013).
10.3183/npprj-2013-28-03-p392-398Tringham, R. W. and Manager, M. A., New developments in Radfoam process, Paper Technology 15(5):288-294 (1974).
Koponen, A., Torvinen, K., Jaäsberg, A., and Kiiskinen, H., Foam forming of long fibers, Nordic Pulp & Paper Research Journal 31(2):239-247 (2016).
10.3183/npprj-2016-31-02-p239-247Jahangiri, P., Novel cellulose based foamformed products: Applications and numerical studies, Master’s Thesis, University of British Columbia, Canada (2013).
Madani, A., Zeinoddini, S., Varahmi, S., Turnbull, H., Phillion, A. B., Olson, J. A., and Martinez, D. M., Ultra-lightweight paper foams: Processing and properties, Cellulose 21:2023-2031 (2014).
10.1007/s10570-014-0197-3Hellen, E., Jetsu, P., and Lehmonen, J., Foam forming–What could it mean for tissue?, Paper Technology 54(4):10-12 (2013).
Hjelt, T., Ketoja, J. A., Kiiskinen, H., Kopoene, A. I., and Pääkkönen, E., Foam forming of fiber products: A review, Journal of Dispersion Science and Technology (2021).
10.1080/01932691.2020.1869035Al-Qararah, A. M., Aqueous foam as the carrier phase in the deposition of fibre networks, Ph.D. Thesis, University of Jyväskylä, Finland (2015).
Al-Qararah, A. M., Ekman, A., Hjelt, T., Ketoja, J. A., Kiiskinen, H., Koponen, A., and Timonen, J., A unique microstructure of the fiber networks deposited from foam-fiber suspensions, Colloids and Surfaces A 482:544-553 (2015).
10.1016/j.colsurfa.2015.07.010Park, G.-H., Nam, S.-H., Lee, W.-G., Kim, H.-H., Lee, S.-G., and Cho, B.-U., Effects of SDS dosage on properties of foam-formed HwBKP sheets and drainage, Journal of Korea TAPPI 53(5):122-129 (2021).
10.7584/JKTAPPI.2021.10.53.5.122Ketoja, J. A., Paunonen, S., Jetsu, P., and Pääkkönen, E., Compression strength mechanisms of low-density fibrous materials, Materials 12(384):ma12030384 (2019).
10.3390/ma12030384Kinnunen, K., Lehmonen, J., Beletski, N., Jetsu, P., and Hjelt, T., Benefits of foam forming technology and its applicability in high MFC addition structures, In Advances in Pulp and Paper Research, Trans. of the XVth Fundamental Research Symposium, Cambridge, pp. 837-850 (2013).
Gottberg, J.-M., Lappalainen, T., and Salminen, K., Polyvinyl alcohol as foaming agent in foam formed paper, Tappi J. 18(8):475-485 (2019).
10.32964/TJ18.8.475Pöhler, T., Ketoja, J. A., Lappalainen, T., Luukkainen, V.-M., Nurminen, I., Lahtinen, P., and Torviene, K., On the strength improvement of lightweight fibre networks by polymers, fibrils and fines, Cellulose 27:6961-6976 (2020).
10.1007/s10570-020-03263-xPark, M.-A., Oh, S.-Y., Ahn, C.-H., Park, M.-J., and Cho, B.-U., Effects of pulp type and stock concentration on foamability and bubble size of fiber foam, J. of Korea TAPPI 52(6):123-131 (2020).
10.7584/JKTAPPI.2020.12.52.6.123- Publisher :Korea Technical Association of The Pulp and Paper Industry
- Publisher(Ko) :한국펄프종이공학회
- Journal Title :Journal of Korea TAPPI
- Journal Title(Ko) :펄프종이기술
- Volume : 53
- No :6
- Pages :20-27
- Received Date : 2021-11-25
- Revised Date : 2021-12-12
- Accepted Date : 2021-12-13
- DOI :https://doi.org/10.7584/JKTAPPI.2021.12.53.6.20
Journal of Korea TAPPI
