Development of Hybrid Calcium Carbonate for High Loading Paper (III) :  Post Hybrid Calcium Carbonate

Jin Sung Choi; Yung Bum Seo

doi:10.7584/JKTAPPI.2016.12.48.6.55

All Issue

2016 Vol.48, Issue 6 Preview Page Next Page

Development of Hybrid Calcium Carbonate for High Loading Paper (III) : Post Hybrid Calcium Carbonate 고충전지 제조를 위한 하이브리드 탄산칼슘 충전제의 개발 (III) : 후처리 하이브리드 탄산칼슘

30 December 2016. pp. 55-61

PDF XML

Abstract

High filler loading in printing paper is desirable for papermakers because they can reduce production cost and carbon dioxide emission, if all the paper properties are acceptable. Two new filler preparation methods were presented and compared in this study. The hybrid calcium carbonate (HCC) was prepared by the in-situ calcium carbonate (CaCO₃) formation on the pre-flocculated mixture of grounded calcium carbonate (GCC) and calcium oxide particles in aqueous medium. For the preparation of ‘Post HCC’, only GCC particles were pre-flocculated firstly, calcium oxide was added to the pre-flocculated GCC secondly, and carbon dioxide were introduced lastly until the pH of the aqueous medium becomes neutral. Both methods increased tensile strength, stiffness, and bulk, but kept smoothness when compared to the case of simple GCC addition at equivalent ash level in the handsheet study. Post HCC gave higher solid content and higher stiffness than HCC.

Keywords

Calcium carbonate

high loaded paper

hydrid calcium carbonate

post HCC

mechanical properties

References

Literature Cited

C. F. Baker and B. A. Nazir, Pratical ways forward to achieving higher filler content papers, Paper 5Pira International Conference of Use of Minerals in Papermaking, Manchester, U.K. (1998)

Baker, C. F. and Nazir, B. A., Pratical ways forward to achieving higher filler content papers, Paper 5, Pira International Conference of Use of Minerals in Papermaking, Manchester, U.K. (1998).

C. Dong, D. Song and T. Patterson, Ind. Eng. Chem. Res., Energy saving in papermaking through filler addition, 47(21); 8430-8435 (2008)

Dong, C., Song, D., and Patterson, T., Energy saving in papermaking through filler addition, Ind. Eng. Chem. Res. 47(21):8430-8435 (2008).

10.1021/ie8011159

Y. Zhao, D. Kim and D. White, Tappi J., Developing a new paradigm for linerboard fillers, 7(3); 3-7 (2008)

Zhao, Y., Kim, D., and White, D., Developing a new paradigm for linerboard fillers, Tappi J. 7(3):3-7 (2008).

Y. B. Seo, J. K. Chung and Y. H. Lee, (2015)

Seo, Y. B., Chung, J. K., and Lee, Y. H., Korea Patent No. 10-1510313 (2015).

Y. Sang, M. McQuaid and P. Englezos, BioResources, Pre-flocculation of precipitated calcium carbonate filler by cationic starch for highly filled mechanical grade paper, 7(1); 354-373 (2011)

Sang, Y., McQuaid, M., and Englezos, P., Pre-flocculation of precipitated calcium carbonate filler by cationic starch for highly filled mechanical grade paper, BioResources 7(1): 354-373 (2011).

V. S. Chauhan and N. K. Bhardwaj, Appita J., Effect of particle size and preflocculation of talc filler on sizing characteristics of paper, 66(1); 66-72 (2013)

Chauhan, V. S. and Bhardwaj, N. K., Effect of particle size and preflocculation of talc filler on sizing characteristics of paper, Appita J. 66(1):66-72 (2013).

D. Seo, W. H. Lim, H. J. Youn and H. L. Lee, Nordic Pulp Pap. Res. J., The effect of process variables for GCC pre-flocculation on floc and handsheet properties, 27(2); 382-387 (2012)

Seo, D., Lim, W. H., Youn, H. J., and Lee, H. L., The effect of process variables for GCC pre-flocculation on floc and handsheet properties, Nordic Pulp Pap. Res. J. 27(2):382-387 (2012).

10.3183/NPPRJ-2012-27-02-p382-387

Y. Sang and H. J. Xiao, Colloids Interface Sci., Clay flocculation improved by cationic poly(vinyl alcohol)/anionic polymer dual-component system, 326; 420-425 (2008)

Sang, Y. and Xiao, H. J., Clay flocculation improved by cationic poly(vinyl alcohol)/anionic polymer dual-component system, Colloids Interface Sci. 326:420-425 (2008).

10.1016/j.jcis.2008.06.058

J. K. Jung and Y. B. Seo, Journal of Korea TAPPI, Development of hybrid calcium carbonate for high loading paper (I), 47(4); 30-37 (2015)

Jung, J. K. and Seo, Y. B., Development of hybrid calcium carbonate for high loading paper (I), Journal of Korea TAPPI 47(4):30-37 (2015).

Y. B. Seo, Y. H. Lee and J. K. Chung, BioResources, The improvement of recycled newsprint properties by in-situ CaCO₃ loading, 9(4); 6254-6266 (2014)

Seo, Y. B., Lee, Y. H., and Chung, J. K., The improvement of recycled newsprint properties by in-situ CaCO₃ loading, BioResources 9(4): 6254-6266 (2014).

10.15376/biores.9.4.6254-6266

Information

Publisher :Korea Technical Association of The Pulp and Paper Industry
Publisher(Ko) :한국펄프종이공학회
Journal Title :Journal of Korea TAPPI
Journal Title(Ko) :펄프종이기술
Volume : 48
No :6
Pages :55-61
Received Date : 2016-10-24
Revised Date : 2016-12-02
Accepted Date : 2016-12-05
DOI :https://doi.org/10.7584/JKTAPPI.2016.12.48.6.55

Journal of Korea TAPPI ISSN:0253-3200(Print) 펄프종이기술

All Issue

Literature Cited