Literature Cited
Giertz, H. W., The effect of beating on individual fibres-fundamentals of papermaking fibres, Transactions of the 1st Fundamental Research Symposium, Cambridge, UK, pp. 389-409 (1957).
Higgins, H. G. and de Yong, J., The beating process -Primary effects and their influence on paper properties-, Formation and Structure of Paper, Transactions of the 2nd Fundamental Research Symposium, Oxford, UK, pp. 651-690 (1961).
Giertz, H. W., The influence of beating on individual fibers and the causal effects on paper properties, International Symposium on Fundamental Concepts of Refining, Institute of Paper Chemistry, Appleton, USA, pp. 87-92 (1980).
Ebeling, K., A critical review of current theories for the refining of chemical pulps, International Symposium of Fundamental Concepts of Refining, Institute of Paper Chemistry, Appleton, USA, pp. 1-36 (1980).
Page, D. H., The beating of chemical pulps–The action and the effects, Transactions of the 9th Fundamental Research Symposium, Cambridge, UK, pp. 1-37 (1989).
Hofmann, C., Washing, bleaching, draing, and bleaching with gas, In A Practical Treatise on the Manufacture of Paper in All Its Branches, Hofmann, C. (ed.), Ch. 3, Section 3, H. C. Baird & Co. (Philadelphia, USA) and Sampson Low, Marston, Low, & Searle (London, UK), pp. 35-48 (1873).
Smith, S., The action of the beater, The Technical Section of the Papermakers Association of Great Britain and Ireland, London, UK (1923).
Alaskevich, Y. D., Study of the pressure in the liquid layer between knives of a beater, Bum. Promst. 46(10):16-17 (1971).
Atack, D., Advances in beating and refining, Transaction of Fundamental Resource Symposium, Oxford, UK, pp. 261-269 (1977).
Olson, J. A., Drozdiak, J., Martinez, M., Garner, R., Robertson, A. G., and Kerekes, R., Characterizing fibre shortening in low-consistency refining using a comminution mode, Powder Technology 129:122-129 (2003).
10.1016/S0032-5910(02)00129-8Li, S. and Ma, M., The effect of disc refiner plate bar height on refined pulp quality and energy consumption, China Pulp & Paper 14(3):15-18 (1995).
Liu, S. and Chen, Z., Effect of bar width of refiner plate on the refined pulp quality and energy consumption in medium consistency refining of short fiber pulp, China Pulp & Paper 25(11):9-12 (2006).
Liu, S. and Chen, Z., The effect of disc abrasion on short-fiber pulp medium consistency refining, China Pulp & Paper 26(9):19-21 (2007).
He, B., Refining, In Papermaking Principle and Engineering, He, B. (ed.), China Light Industry Press, Beijing, China, pp. 32-34 (2010).
Vomhoff, H., The influence of the bar angle on the refining process in a disc refiner, Technical Report, Institut fur Papierfabrikation at the Technische Hochschule Darmstadt (1990).
Siewert, W. and Selder, H., Economic use of energy in pulp refining, International Symposium on Fundamental Concepts of Refining, Appleton, USA, pp. 206-216 (1980).
Brecht, W., Athanassoulas, M., and Siewert, W. H., The influenece of the setting angle between the tackle bars on the performance of beaters and refiners, Das Papier 19:93-96 (1965).
Kerekes, R. J., Energy and force in refining, Journal of Pulp and Paper Science 36(1-2): 10-15 (2010).
Liu, H., Dong, J., Guo, X., Qiao, L., and Jing, H., Quantitative analysis of pulp refining and its research progress [J], China Pulp & Paper 37(8):66-71 (2018).
Technical Association of the Pulp and Paper Industry, TAPPI standard TIP 0508-05: Refiner plate intensity, USA (2001).
- Publisher :Korea Technical Association of The Pulp and Paper Industry
- Publisher(Ko) :한국펄프종이공학회
- Journal Title :Journal of Korea TAPPI
- Journal Title(Ko) :펄프종이기술
- Volume : 51
- No :5
- Pages :16-26
- Received Date : 2019-07-22
- Revised Date : 2019-09-14
- Accepted Date : 2019-09-18
- DOI :https://doi.org/10.7584/JKTAPPI.2019.10.51.5.16
Journal of Korea TAPPI
