All Issue

2018 Vol.50, Issue 5 Preview Page
Fibrillation Characteristics of KOCC and its Effect on the Physical Properties of Linerboard

KOCC의 피브릴화 특성 및 라이너판지 물성에 미치는 영향

Jun Kyu Han
,
Im Jeong Hwang
,
Jin Mo Kim
,
Jae Jun Choi
,
Yong Kyu Lee
,
Jong Myoung Won†
한준규
,
황임정
,
김진모
,
최재준
,
이용규
,
원종명 †
Program of Paper Science & Engineering, Division of Forest Material Science and Engineering, College of Forest and Environmental Sciences, Kangwon National University, Chuncheon, 24341
강원대학교 산림환경과학대학 산림응용공학부 제지공학전공
†Corresponding author: E-Mail: wjm@kangwon.ac.kr
30 October 2018. pp. 93-99
PDF XML Citation
Abstract

Fibrillation was attempted to determine the suitability of KOCC for the production of nanocellulose in order to utilize it as a high value added material, and the possibility of using fibrillated KOCC obtained therefrom as a papermaking additive was evaluated. A grinder was used for the fibrillation of KOCC. In order to investigate the fibrillation characteristics of KOCC, the changes of SEM images, Brookfield viscosity and degree of polymerization were measured. Also, the handsheets were prepared and the changes of major physical properties were investigated in order to evaluate the performance and applicability of fibrillated KOCC as an additive for linerboard manufacture. The fibrillation of KOCC was significantly delayed compared to the bleached chemical pulp, and the complete fibrillation was not achieved, probably due to the residual lignin content (kappa no. 19.36). It is difficult to produce nanocellulose without proper pretreatment. The average fiber length decreased to the level of fines at 20 times of grinding because KOCC was severely aged. As the fibrillation of KOCC proceeded, the degree of Brookfield viscosity continued to increase and the degree of polymerization showed a gradual decrease. Bulk, tear index, and burst index of paper were not significantly affected by the addition of fibrillated KOCC. However, it was found that the tensile index and stiffness could be improved by the combination of retention aid and fibrillated KOCC.

Keywords
KOCC
Fibrillation
SEM
average fiber length
Brookfield viscosity
degree of polymerization
paper properties
References

Literature Cited

1
S. Eichhorn, A. Dufresne, M. Aranguren, N. Marcovich, J. Capadona, S. Rowan, C. Weder, W. Thielemans, M. Roman, S. Renneckar, W. Gindl, S. Veigel, J. Keckes, H. Yano, K. Abe, M. Nogi, A. Nakagaito, A. Mangalam, J. Simonsen, A. Benight, A. Bismarck, L. Berglund and T. Peijs, J. Mater. Sci, Review: current international research into cellulose nanofibres and nanocomposites, 45(1); 1-33 (2010)

Eichhorn, S., Dufresne, A., Aranguren, M., Marcovich, N., Capadona, J., Rowan, S., Weder, C., Thielemans, W., Roman, M., Renneckar, S., Gindl, W., Veigel, S., Keckes, J., Yano, H., Abe, K., Nogi, M., Nakagaito, A., Mangalam, A., Simonsen, J., Benight, A., Bismarck, A., Berglund, L., and Peijs, T. Review: current international research into cellulose nanofibres and nanocomposites, J. Mater. Sci. 45(1):1-33 (2010).

10.1007/s10853-009-3874-0
2
F. W. Herrick, R. L. Casebier, J. K. Hamilton and K. R. Dandberg, J. Appl. Polym. Sci., Appl. Polym. Symp, Microfibrillated cellulose: Morphology and accessibility, 37; 797-813 (1983)

Herrick, F. W., Casebier, R. L., Hamilton, J. K., and Dandberg, K. R., Microfibrillated cellulose: Morphology and accessibility, J. Appl. Polym. Sci., Appl. Polym. Symp. 37:797-813 (1983).

3
A. F. Turbak, F. W. Snyder and K. R. Sandberg, J. Appl. Polym. Sci., Appl. Polym. Symp, Microfibrillated cellulose, a new cellulose product: properties, uses, and commercial potential, 37; 815-827 (1983)

Turbak, A. F., Snyder, F. W., and Sandberg, K. R., Microfibrillated cellulose, a new cellulose product: properties, uses, and commercial potential, J. Appl. Polym. Sci., Appl. Polym. Symp. 37:815-827 (1983).

4
M. Martínez-Sanz, F. Pettolino, B. Flanagan, M. J. Gidley and E. P. Gilbert, Carbohydrate Polymers, Structure of cellulose microfibrils in mature cotton fibres, 175; 450-463 (2017)

Martínez-Sanz, M., Pettolino, F., Flanagan, B., Gidley, M. J., and Gilbert, E. P., Structure of cellulose microfibrils in mature cotton fibres, Carbohydrate Polymers 175:450-463 (2017).

5
L. Duan and W. Yu, Review of recent research in nano cellulose preparation and application from jute fibers; 741-748, 3rd International Conference on Materials Engineering, Manufacturing Technology and Control (2016)

Duan, L. and Yu W., Review of recent research in nano cellulose preparation and application from jute fibers, 3rd International Conference on Materials Engineering, Manufacturing Technology and Control, pp. 741-748 (2016).

6
A. Mandal and D. Chakrabarty, Carbohydrate Polymers, Isolation of nanocellulose from waste sugarcane bagasse (SCB) and its characterization, 86; 1291-1299 (2011)

Mandal, A. and Chakrabarty, D., Isolation of nanocellulose from waste sugarcane bagasse (SCB) and its characterization, Carbohydrate Polymers 86:1291-1299 (2011).

10.1016/j.carbpol.2011.06.030
7
Y. H. Feng, T. Y. Cheng, W. G. Yang, P. T. Ma, H. Z. He, X. C. Yin and X. X. Yu, Industrial Crops & Products, Characteristics and environmentally friendily extraction of cellulose nanofibrils from sugarcane bagasse, 111; 285-291 (2018)

Feng, Y. H., Cheng, T. Y., Yang, W. G., Ma, P. T., He, H. Z., Yin, X. C., and Yu, X. X., Characteristics and environmentally friendily extraction of cellulose nanofibrils from sugarcane bagasse, Industrial Crops & Products 111:285-291 (2018).

10.1016/j.indcrop.2017.10.041
8
L. A. S. Costa, D. J. Assis, G. V. P. Gomes, J. B. A. da Silva, A. F. Fonsêca and J. I. Druzian, Materials Today: Proceedings, Extraction and characterization of nanocellulose from corn stover, 2; 287-294 (2015)

Costa, L. A. S., Assis, D. J., Gomes, G. V. P., da Silva, J. B. A., Fonsêca, A. F., and Druzian, J. I., Extraction and characterization of nanocellulose from corn stover, Materials Today: Proceedings 2:287-294 (2015).

10.1016/j.matpr.2015.04.045
9
K. Chitbanyong, S. Pitiphatharaworachot, S. Pisutpiched, S. Khantayanuwong and B. Puangsin, Bioresources, Characterization of bamboo nanocellulose prepared by TEMPO-mediated oxidation, 13(2); 4440-4454 (2018)

Chitbanyong, K., Pitiphatharaworachot, S., Pisutpiched, S., Khantayanuwong, S., and Puangsin, B., Characterization of bamboo nanocellulose prepared by TEMPO-mediated oxidation, Bioresources 13(2):4440-4454 (2018).

10.15376/biores.13.2.4440-4454
10
J. I. Morán, V. A. Alvarez, V. P. Cyras and A. Vázquez, Cellulose, Extraction of cellulose and preparation of nocellulose from sisal fibers, 15; 149-159 (2008)

Morán, J. I., Alvarez, V. A., Cyras, V. P., and Vázquez, A., Extraction of cellulose and preparation of nocellulose from sisal fibers, Cellulose 15:149-159 (2008).

11
V. A. Barbash, O. V. Yaschenko and O. M. Shniruk, Nanoscale Research Letters, Preparation and properties of nanocellulose from organosolv straw pulp, 12; 241-248 (2017)

Barbash, V. A., Yaschenko, O. V., and Shniruk, O. M., Preparation and properties of nanocellulose from organosolv straw pulp, Nanoscale Research Letters 12:241-248 (2017).

10.1186/s11671-017-2001-4
12
S. Rezanezhad, N. Nazanezhad and G. Asadpur, Lignocellulose, Isolation of nanocellulose from rice waste via ultrasonication, 2(1); 282-291 (2013)

Rezanezhad, S., Nazanezhad, N., and Asadpur, G., Isolation of nanocellulose from rice waste via ultrasonication, Lignocellulose 2(1): 282-291 (2013).

13
H. Wang, D. Li and R. Zhang, Bioresources, Preparation of ultralong cellulose nanofibers and optically transparent nanopapers derived from waste corrugated paper pulp, 8(1); 1374-1384 (2013)

Wang, H., Li, D., and Zhang, R., Preparation of ultralong cellulose nanofibers and optically transparent nanopapers derived from waste corrugated paper pulp, Bioresources 8(1):1374-1384 (2013).

10.15376/biores.8.1.1374-1384
14
Q. Wang and J. Y. Zhu, TAPPI Journal, Facile preparation of nanofiller-paper using mixed office paper without deinking, 14(3); 167-174 (2015)

Wang, Q. and Zhu, J. Y., Facile preparation of nanofiller-paper using mixed office paper without deinking, TAPPI Journal 14(3):167-174 (2015).

15
N. Chen, J. Y. Zhu and Z. Tong, Cellulose, Fabrication of microfibrillated cellulose gel from waste pulp sludge via mile maceration combined with mechanical shearing, 23; 2573-2583 (2016)

Chen, N., Zhu, J. Y., and Tong, Z., Fabrication of microfibrillated cellulose gel from waste pulp sludge via mile maceration combined with mechanical shearing, Cellulose 23:2573-2583 (2016).

10.1007/s10570-016-0959-1
16
I. J. Hwang, J. M. Kim, Y. K. Lee and J. M. Won, Journal of Korea TAPPI, Effect of alkaline pre-treatment on the production characteristics of nanofibrillated cellulose from white ledger, 49(5); 86-96 (2017)

Hwang, I. J., Kim, J. M., Lee, Y. K., and Won, J. M., Effect of alkaline pre-treatment on the production characteristics of nanofibrillated cellulose from white ledger, Journal of Korea TAPPI 49(5):86-96 (2017).

10.7584/jktappi.2017.10.49.5.86
17
I. J. Hwang, J. M. Kim, Y. K. Lee and J. M. Won, Journal of Korea TAPPI, Improvement of paper properties using white ledger CNF, 50(4); 71-76 (2018)

Hwang, I. J., Kim, J. M., Lee, Y. K., and Won, J. M., Improvement of paper properties using white ledger CNF, Journal of Korea TAPPI 50(4):71-76 (2018).

10.7584/jktappi.2018.08.50.4.71
Information
  • Publisher :Korea Technical Association of The Pulp and Paper Industry
  • Publisher(Ko) :한국펄프종이공학회
  • Journal Title :Journal of Korea TAPPI
  • Journal Title(Ko) :펄프종이기술
  • Volume : 50
  • No :5
  • Pages :93-99
  • Received Date : 2018-10-01
  • Revised Date : 2018-10-13
  • Accepted Date : 2018-10-15
  • DOI :https://doi.org/10.7584/JKTAPPI.2018.10.50.5.93
Journal Informaiton Journal of Korea TAPPI Journal of Korea TAPPI
Online Submission
  • scopus
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crosscheck
  • orcid
Journal Informaiton Journal Informaiton - close