Feasibility Study of Using the In-situ CaCO3 Formed Wood Flour for Printing Paper

Yung Bum Seo; Young Ho Lee; Jae Kwon Jung

doi:10.7584/JKTAPPI.2018.02.50.1.44

All Issue

2018 Vol.50, Issue 1 Preview Page Next Page

Feasibility Study of Using the In-situ CaCO₃ Formed Wood Flour for Printing Paper In-situ 탄산칼슘을 표면에 형성시킨 목분의 인쇄용지 적용가능성 연구

28 February 2018. pp. 44-53

PDF XML

Abstract

Wood flours can give high bulk and high stiffness in paper, but low brightness and low smoothness may prevent them from wide utilization in printing paper. Hydrogen peroxide bleaching and in-situ calcium carbonate formation on wood flours were compared in this study to find out the possibility of using either of them in printing paper. The results showed that the in-situ calcium carbonate formation method on wood flours had better possibility than bleaching method in respects of better smoothness and higher brightness in paper properties. Much higher yield and no water contamination were the economical advantage of using the in-situ CaCO₃ process on wood flours.

Keywords

Wood flours

bulk

in-situ calcium carbonate formation

hydrogen peroxide bleaching

brightness

smoothness

References

Literature Cited

T. G. Shin, C. H. Kim, H. K. Chung, J. M. Seo and Y. R. Lee, Journal of Korea TAPPI, Fundamental study on developing lignocellulosic fillers for papermaking (I), 40(2); 21-29 (2008)

Shin, T. G., Kim, C. H., Chung, H. K., Seo, J. M., and Lee, Y. R., Fundamental study on developing lignocellulosic fillers for papermaking (I), Journal of Korea TAPPI 40(2):21-29 (2008).

C. H. Kim, J. Y. Lee, Y. R. Lee, H. K. Chung, K. K. Back, H. J. Lee, H. J. Gwak, H. R. Gang and S. H. Kim, Journal of Korea TAPPI, Fundamental study on developing lignocellulosic fillers for papermaking (II), 41(2); 1-6 (2009)

Kim, C. H., Lee, J. Y., Lee, Y. R., Chung, H. K., Back, K. K., Lee, H. J., Gwak, H. J., Gang, H. R., and Kim, S. H., Fundamental study on developing lignocellulosic fillers for papermaking (II), Journal of Korea TAPPI 41(2):1-6 (2009).

H. H. Kim, C. H. Kim, J. M. Seo, J. Y. Lee, S. H. Kim, H. J. Park and G. C. Kim, APPITA J, Use of modified lignocellulosic fillers to improve paper properties, 64(4); 338-343 (2011)

Kim, H. H., Kim, C. H., Seo, J. M., Lee, J. Y., Kim, S. H., Park, H. J., and Kim, G. C., Use of modified lignocellulosic fillers to improve paper properties, APPITA J. 64(4):338-343 (2011).

Y. B. Seo, J. H. Ahn and H. L. Lee, J. Cleaner Production, Upgrading waste paper by in-situ calcium carbonate formation, 155; 212-217 (2017)

Seo, Y. B., Ahn, J. H., and Lee, H. L., Upgrading waste paper by in-situ calcium carbonate formation, J. Cleaner Production 155: 212-217 (2017).

10.1016/j.jclepro.2016.09.003

Y. B. Seo, Y. H. Lee and J. K. Chung, Bioresources, The improvement of recycled newsprint properties by in-situ CaCO₃ loading, 9(4); 6254-6266 (2014))

Seo, Y. B., Lee, Y. H., and Chung, J. K., The improvement of recycled newsprint properties by in-situ CaCO3 loading, Bioresources 9(4): 6254-6266 (2014)

10.15376/biores.9.4.6254-6266

Y. B. Seo, M. W. Lee, Y. H. Lee and J. K. Chung, Application of in-situ CaCO₃ formation method for better utilization of recycled fibers (1), 46(5); 19-26 (2014)

Seo, Y. B., Lee, M. W., Lee, Y. H., and Chung, J. K., Application of in-situ CaCO₃ formation method for better utilization of recycled fibers (1) 46(5):19-26 (2014).

Korea patent registration number 10-1361655.

H. J. Yoon, H. S. Kwon, S. M. Jin, J. H. Ryu, H. Jo and S. M. Lee, Evaluation of folding resistance of paper and paperboard for predicting folding crack, 2008 Spring Annual Conference ProceedingsKorea TAPPI Press, Seoul; 275-282 (2008)

Yoon, H. J., Kwon, H. S., Jin, S. M., Ryu, J. H., Jo, H., and Lee, S. M., Evaluation of folding resistance of paper and paperboard for predicting folding crack, 2008 Spring Annual Conference Proceedings, Korea TAPPI Press, Seoul, pp. 275-282 (2008).

S. J. Hong, J. Y. Park and H. J. Kim, Journal of Korea TAPPI, Effects on mechanical strength improvement of liner paper using recycled fibres from waste cotton clothes, 46(6); 94-102 (2014)

Hong, S. J., Park, J. Y., and Kim, H. J., Effects on mechanical strength improvement of liner paper using recycled fibres from waste cotton clothes, Journal of Korea TAPPI 46(6): 94-102 (2014).

10.7584/ktappi.2014.46.6.094

Information

Publisher :Korea Technical Association of The Pulp and Paper Industry
Publisher(Ko) :한국펄프종이공학회
Journal Title :Journal of Korea TAPPI
Journal Title(Ko) :펄프종이기술
Volume : 50
No :1
Pages :44-53
Received Date : 2017-12-21
Revised Date : 2018-02-14
Accepted Date : 2018-02-19
DOI :https://doi.org/10.7584/JKTAPPI.2018.02.50.1.44

Journal of Korea TAPPI ISSN:0253-3200(Print) 펄프종이기술

All Issue

Literature Cited