Journal of Korea TAPPI ISSN:0253-3200(Print) 펄프종이기술

J. M. Park and J. L. Thorp, Journal of Korea TAPPI, Yield and fracture of paper - Angle of initial crack propagation and yield zone propagation, 31(5); 57-72 (1999)

Park, J. M. and Thorp, J. L., Yield and fracture of paper - Angle of initial crack propagation and yield zone propagation, Journal of Korea TAPPI 31(5):57-72 (1999).

D. E. Swinehart and D. Broek, Tappi J., Tenacity, fracture mechanics, and unknown coater web breaks, 79(2); 233-237 (1996)

Swinehart, D. E. and Broek, D., Tenacity, fracture mechanics, and unknown coater web breaks, Tappi J. 79(2):233-237 (1996).

R. S. Seth, Tappi J., Optimizing reinforcement pulps by fracture toughness, 79(1); 170-178 (1996)

Seth, R. S., Optimizing reinforcement pulps by fracture toughness, Tappi J. 79(1):170-178 (1996).

S. M. Kazi and M. T. Kortschot, Tappi J., The fracture behavior of TMP/kraft blends, 79(5); 197-202 (1996)

Kazi, S. M. and Kortschot, M. T., The fracture behavior of TMP/kraft blends, Tappi J. 79(5):197-202 (1996).

R. S. Seth and C. F. Baker (ed.), In Products of Papermaking, Plane stress fracture toughness and its measurement for paperTransactions of the 10th Fundamental Research Symposium, Pira, UK, III; 1529-1560 (1993)

Seth, R. S., Plane stress fracture toughness and its measurement for paper, In Products of Papermaking, Transactions of the 10th Fundamental Research Symposium, Vol. III, Baker, C. F. (ed.), Pira, UK, pp. 1529-1560 (1993).

T. Yuhara, M. T. Kortschot and C. F. Baker (ed.), In Products of Papermaking, The J-integral as a parameter for characterizing the fracture toughness of paperTransactions of the 10th Fundamental Research Symposium, Pira, UK, 2; 783-807 (1993)

Yuhara, T. and Kortschot, M. T., The J-integral as a parameter for characterizing the fracture toughness of paper, In Products of Papermaking, Transactions of the 10th Fundamental Research Symposium, Vol. 2, Baker, C. F. (ed.), Pira, UK, pp. 783-807 (1993).

J. A. Begley and J. D. Landes, The J intergral as a fracture criterionFracture Toughness: Part II; 1-23, ASTM International. (1972)

Begley, J. A. and Landes, J. D., The J intergral as a fracture criterion, Fracture Toughness: Part II, ASTM International, pp. 1-23 (1972).

10.1520/STP38816S

J. R. Rice, P. C. Paris and J. G. Merkle, Some further results of J-integral analysis and estimatesIn Progress in Flaw Growth and Fracture Toughness Testing, Special Tech. Publication 536; 231-245, ASTM International. (1973)

Rice, J. R., Paris, P. C., and Merkle, J. G., Some further results of J-integral analysis and estimates, In Progress in Flaw Growth and Fracture Toughness Testing, Special Tech. Publication 536, ASTM International, pp. 231- 245 (1973).

T. Uesaka and R. E. Mark (ed.), Specimen design for mechanical testing of paper and paperboardIn Handbook of Physical and Mechanical Testing of Paper and Paperboard, Chapter 3; 77-113, New York. Marcel Decker, Inc.. (1983)

Uesaka, T., Specimen design for mechanical testing of paper and paperboard, In Handbook of Physical and Mechanical Testing of Paper and Paperboard, Chapter 3, Mark, R. E. (ed.), Marcel Decker, Inc., New York, pp. 77-113 (1983).

T. Uesaka, H. Okaniwa, K. Murakami and R. Imamura, Japan TAPPI J., Tearing resistance of paper and its characterization, 33(6); 403-409 (1979)

Uesaka, T., Okaniwa, H., Murakami, K., and Imamura, R., Tearing resistance of paper and its characterization, Japan TAPPI J. 33(6):403-409 (1979).

10.2524/jtappij.33.6_403

Y. W. Mai and B. Cotterell, Int. J. Fract., On the essential work of ductile fracture in polymers, 32(2); 105-125 (1986)

Mai, Y. W. and Cotterell, B., On the essential work of ductile fracture in polymers, Int. J. Fract. 32(2):105-125 (1986).

10.1007/BF00019787

Y. W. Mai, B. Cotterell, R. Horlyck and G. Vigna, Polym. Eng. Sci., The essential work of plane stress ductile fracture of linear polyethylenes, 27(11); 804-809 (1987)

Mai, Y. W., Cotterell, B., Horlyck, R., and Vigna, G., The essential work of plane stress ductile fracture of linear polyethylenes, Polym. Eng. Sci. 27(11):804-809 (1987).

10.1002/pen.760271106

J. Wu, Y. W. Mai and B. Cotterell, J. Mater. Sci., Fracture toughness and fracture mechanics of PBT/PC/IM blend: Part 1. Fracture properties, 28(12); 3373-3384 (1993)

Wu, J., Mai, Y. W. and Cotterell, B., Fracture toughness and fracture mechanics of PBT/PC/ IM blend: Part 1. Fracture properties, J. Mater. Sci. 28(12):3373-3384 (1993).

10.1007/BF00354261

C. A. Paton and S. Hashemi, J. Mater. Sci., Plane-stress essential work of ductile fracture for polycarbonate, 27(9); 2279-2290 (1992)

Paton, C. A. and Hashemi, S., Plane-stress essential work of ductile fracture for polycarbonate, J. Mater. Sci. 27(9):2279-2290 (1992).

10.1007/BF01105033

R. Seth, A. G. Robertson, Y. W. Mai and J. D. Hoffmann, Tappi J., Plane stress fracture toughness of paper, 76(2); 109-116 (1993)

Seth, R., Robertson, A. G., Mai, Y. W., and Hoffmann, J. D., Plane stress fracture toughness of paper, Tappi J. 76(2):109-116 (1993).

J. Tryding and P. J. Gustafsson, Tappi J., Characterization of tensile fracture properties of paper, 83(2); 84-89 (2000)

Tryding, J. and Gustafsson, P. J., Characterization of tensile fracture properties of paper, Tappi J. 83(2):84-89 (2000).