Literature Cited
Kržan, A. and Žagar, E., Microwave driven wood liquefaction with glycols, Bioresource Technology 100(12):3143-3146 (2009).
Imam, S. H., Gordon, S. H., Mao, L., and Chen, L., Environmentally friendly wood adhesive from renewable plant polymer: Characteristics and optimization, Polymer Degradation and Stability 73(3):529-533 (2001).
10.1016/s0141-3910(01)00114-8Wei, Y. P., Cheng, F., Li, H. P., and Yu, J. G., Synthesis and properties of polyurethane resins based on liquefied wood, Journal of Applied Polymer Science 92(1):351-356 (2004).
10.1002/app.20023Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., and Lindström, T., Enzymatic hydrolysis combined with mechanical shearing and high pressure homogenization for nanoscale cellulose fibrils and strong gels, Biomacromolecules 8(6):1934-1941 (2007).
Ahn, E. B., Hong, S. B., Kim, K. J., and Eom, T. J., Micro-fibrillated cellulose preparation with enzyme beating pretreatment and effect on paper strength improvement, Journal of Korea TAPPI 47(6):57-65 (2015).
10.7584/ktappi.2015.47.6.057Yoshida, C., Okabe, K., Yao, T., Shiraishi, N., and Oya, A., Preparation of carbon fibers from biomass-based phenol-formaldehyde resin, Journal of Material Science 40(2):335-339 (2005).
10.1007/s10853-005-6087-1Sudo, K. and Shimizu, K., A new carbon fiber from lignin, Journal of Applied Polymer Science 44(15):127-134 (1992).
10.1002/app.1992.070440113Pan, H., Zheng, Z., and Hse, C. Y., Microwave- assisted liquefaction of wood with polyhydric alcohols and its application in preparation of polyurethane foams, European Journal of Wood and Wood Products 70(4):461-470 (2012).
Lee, S. H. and Ohkita, T., Rapid wood liquefaction by supercritical phenol, Wood Science and Technology 37(1):29-38 (2003).
10.1007/s00226-003-0167-7Miura, M., Kagaa, H., Sakuraib, A., Kakuchic, T., and Takahashic, K., Rapid pyrolysis of wood block by microwave heating, Journal of Analytical and Applied Pyrolysis 71(1):187-199 (2004).
10.1016/s0165-2370(03)00087-1Kappe, C. O., Microwave dielectric heating in synthetic organic chemistry, Chemical Society Reviews 37:1127-1139 (2008).
Gronnow, M. J., White, R. J., Clark, J. H., and Macquarrie, D. J., Energy efficiency in chemical reactions: A comparative study of different reaction techniques, Organic Process Research & Development 9(4):516-518 (2005).
10.1021/op0498060Mašek, O., Budarin, V., Gronnow, M., Crombie, K., Brownsort, P., Fitzpatrick, E., and Hurst, P., Microwave and slow pyrolysis biochar - Comparison of physical and functional properties, Journal of Analytical and Applied Pyrolysis 100:41-48 (2013).
Kim, K. J., Jung, J. D., Jung, S. E., Hong, S. B., and Eom, T. J., Delignification of lignocellulosic biomass with high-boiling point solvent and acidic catalyst, Journal of Korea TAPPI 48(1):119-126 (2016).
10.7584/ktappi.2016.48.1.119Nah, G. B., Jung, S. E., Hong, S. B., Kim, K. J., Lee, J. M., and Eom, T. J., Chemical dispersion of lignocellulosic materials (LCM) by glycol ether, Proceeding of Spring Conference of the Korea TAPPI, pp. 87 (2017).
Yousef, M. A., Shabaka, A. A., Nada, A. M. A., and AbdEl-Nour, K. N., Physical properties and IR spectroscopy of thermally treated bagasse paper sheet, Indian Journal of Pure and Applied Physics 29:6-8 (1991).
Alriols, M. G., Tejado, A., Blanco, M. A., Mondragon, I., and Labidi, J., Agricultural palm oil tree residues as raw material for cellulose, lignin and hemicellulose production by ethylene glycol pulping process, Chemical Engineering Journal 148(1):106-114 (2009).
10.1016/j.cej.2008.08.008Li, G., Hse, C., and Qin, T., Wood liquefaction with phenol by microwave heating and FTIR evaluation, Journal of Forestry Research 26(4):1043-1048 (2015).
10.1007/s11676-015-0114-0Hong, S. B., Kim, K. J., and Eom, T. J., Delignification of pine wood meals using high boiling point solvents and acidic catalysts, Journal of Korea TAPPI 48(6):131-136 (2016).
10.7584/jktappi.2016.12.48.6.131Kim, K. J., Nah, G. B., Ryu, J. A., and Eom, T. J., Preparation of lignin rich micro-cellulose fines (LMCFs) by chemical micronization method and characteristics of LMCFs handsheet, Journal of Korea TAPPI 49(3):109-117 (2017).
10.7584/jktappi.2017.06.49.3.109Lawther, J. M., Sun, R., and Bank, W. B., Fractional characterization of wheat straw lignin components by alkaline nitrobenzene oxidation and FT-IR spectroscopy, Journal of Agricultural and Food Chemistry 44(5):1241-1247 (1996).
10.1021/jf9502764Huang, Y., Wang, L., Chao, Y., Nawawi, D. S., Akiyama, T., Yokoyama, T., and Matsumoto, Y., Analysis of lignin aromatic structure in wood based on the IR spectrum, Journal of Wood Chemistry and Technology 32(4):294-303 (2012).
10.1080/02773813.2012.666316Colom, X., Carrillo, F., Nogués, F., and Garriga, P., Structural analysis of photodegraded wood by means of FTIR spectroscopy, Polymer Degradation and Stability 80(3):534-549 (2003).
10.1016/s0141-3910(03)00051-xNelson, M. L. and O’Connor, R. T., Relation of certain infrared bands to cellulose crystallinity and crystal Lattice type, Part I: Spectra of Lattice type I, II, III and of amorphous cellulose, Journal of Applied Polymer Science 8(3):1311-1324 (1964).
- Publisher :Korea Technical Association of The Pulp and Paper Industry
- Publisher(Ko) :한국펄프종이공학회
- Journal Title :Journal of Korea TAPPI
- Journal Title(Ko) :펄프종이기술
- Volume : 49
- No :4
- Pages :150-158
- Received Date : 2017-08-06
- Revised Date : 2017-08-16
- Accepted Date : 2017-08-18
- DOI :https://doi.org/10.7584/JKTAPPI.2017.08.49.4.150


Journal of Korea TAPPI






