All Issue

2022 Vol.54, Issue 1 Preview Page
Characteristics of Basepaper Blended with Bamboo Organosolv Pulps and Wood Kraft Pulps for Air Filter Application

대나무 유기용매 펄프가 혼합된 필터용 원지 특성 평가

Jiae Ryu1
,
Seung-Geun Kim2
,
Jung Myoung Lee3†
류지애 1
,
김승근 2
,
이중명 3†
1Department of Wood Science and Technology, Kyungpook National University
2Jirisan Hanji, Namwon-si, Jeonbuk
3Major in Wood Science and Technology, School of Forestry, Science and Landscape Architecture & Agricultural Science and Technology Research Institute, Kyungpook Nationl University
1경북대학교 임산공학과, 학생
2지리산한지(유), 관리부장
3경북대학교 산림과학·조경학부 임산공학전공 및 농업과학기술연구소, 교수
†Corresponding author: E-Mail: jmylee@knu.ac.kr (Address: Major in Wood Science and Technology, School of Forestry, Science and Landscape Architecture, Kyungpook Nationl University, Daegu, 41566, Republic of Korea)
28 February 2022. pp. 65-72
PDF XML Citation
Abstract

Air pollution is a major environmental issue; thus, air purification apparatus fitted with various types of filter have become popular to remove suspended particulate matter, dirts and toxic materials to create a clean environment. Polypropylene is the most popular types of filter materials; however, is not easily reusable, which can lead environmental pollution during incineration process. In this regards, applications of cellulosic fibers to air filter materials could be an alternative way to alleviate these issues. In this study, sheets of paper blended with bamboo pulps from an organosolv pulping and kraft pulps were produced in a pilot-scale papermachine and investigated as a base paper to fabricate a potential air filter architecture. The air resistance of the blended paper was less than one second regardless of the grammage and mixing ratios of bamboo and kraft pulps, indicating the resulting base paper could be used an air filter material.

Keywords
Bamboo
organosolv
base paper
filter
References

Literature Cited

1

Xia, T. and Chen, C., Evolution of pressure drop across electrospun nanofiber filters clogged by solid particles and its influence on indoor particulate air pollution control, Journal of Hazardous Materials 402:123479 (2021).

10.1016/j.jhazmat.2020.123479
2

Al-Kindi, S. G., Brook, R. D., Biswal, S., and Rajagopalan, S., Environmental determinants of cardiovascular disease: Lessons learned from air pollution, Nature Reviews Cardiology 17(10):656-672 (2020).

10.1038/s41569-020-0371-2
3

Souzandeh, H., Wang, Y., Netravali, A. N., and Zhong, W. H., Towards sustainable and multifunctional air-filters: A review on biopolymer-based filtration materials, Polymer Reviews 59(4):651-686 (2019).

10.1080/15583724.2019.1599391
4

Min, K., Kim, S., and Kim, S., Silk protein nanofibers for highly efficient, eco-friendly, optically translucent, and multifunctional air filters, Scientific Reports 8(1):1-10 (2018).

10.1038/s41598-018-27917-w
5

Fan, X., Wang, Y., Zheng, M., Dunne, F., Liu, T., Fu, X., and Zhong, W. H., Morphology engineering of protein fabrics for advanced and sustainable filtration, Journal of Materials Chemistry A 6(43):21585-21595 (2018).

10.1039/C8TA08717B
6

Stanford, M. G., Li, J. T., Chen, Y., McHugh, E. A., Liopo, A., Xiao, H., and Tour, J. M., Self-sterilizing laser-induced graphene bacterial air filter, ACS Nano 13(10):11912-11920 (2019).

10.1021/acsnano.9b05983
7

Bai, Y., Han, C. B., He, C., Gu, G. Q., Nie, J. H., Shao, J. J., and Wang, Z. L., Washable multilayer triboelectric air filter for efficient particulate matter PM2.5 removal, Advanced Functional Materials 28(15):1706680 (2018).

10.1002/adfm.201706680
8

Liang, H., Jiao, X., Li, C., and Chen, D., Flexible self-supported metal-organic framework mats with exceptionally high porosity for enhanced separation and catalysis, Journal of Materials Chemistry A 6(2):334-341 (2018).

10.1039/C7TA08210J
9

Cao, J., Cheng, Z., Kang, L., Lin, M., and Han, L., Patterned nanofiber air filters with high optical transparency, robust mechanical strength, and effective PM2.5 capture capability, RSC Advances 10(34):20155-20161 (2020).

10.1039/D0RA01967D
10

Rajak, A., Hapidin, D. A., Iskandar, F., Munir, M. M., and Khairurrijal, K., Electrospun nanofiber from various source of expanded polystyrene (EPS) waste and their characterization as potential air filter media, Waste Management 103:76-86 (2020).

10.1016/j.wasman.2019.12.017
11

Liu, H., Liu, L., Yu, J., Yin, X., and Ding, B., High-efficiency and super-breathable air filters based on biomimetic ultrathin nanofiber networks, Composites Communications 22: 100493 (2020).

10.1016/j.coco.2020.100493
12

Xiong, Z. C., Yang, R. L., Zhu, Y. J., Chen, F. F., and Dong, L. Y., Flexible hydroxyapatite ultralong nanowire-based paper for highly efficient and multifunctional air filtration, Journal of Materials Chemistry A 5(33):17482-17491 (2017).

10.1039/C7TA03870D
13

Wang, B., Wang, Q., Wang, Y., Di, J., Miao, S., and Yu, J., Flexible multifunctional porous nanofibrous membranes for high-efficiency air filtration, ACS Applied Mmaterials & Interfaces 11(46):43409-43415 (2019).

10.1021/acsami.9b17205
14

Hormann, A. M., Vom Saal, F. S., Nagel, S. C., Stahlhut, R. W., Moyer, C. L., Ellersieck, M. R., and Taylor, J. A., Holding thermal receipt paper and eating food after using hand sanitizer results in high serum bioactive and urine total levels of bisphenol A (BPA), PLoS One 9(10):e110509 (2014).

10.1371/journal.pone.0110509
15

Li, Y., Samad, Y. A., Taha, T., Cai, G., Fu, S. Y., and Liao, K., Highly flexible strain sensor from tissue paper for wearable electronics, ACS Sustainable Chemistry & Engineering 4(8):4288-4295 (2016).

10.1021/acssuschemeng.6b00783
16

Vais, A., Miron, V., Pedersen, M., and Folke, J., “Lean and Green” at a Romanian secondary tissue paper and board mill—putting theory into practice, Resources, Conservation and Recycling 46(1):44-74 (2006).

10.1016/j.resconrec.2005.06.005
17

Barbash, V. A., Yashchenko, O. V., and Vasylieva, O. A., Preparation and application of nanocellulose from Miscanthus× giganteus to improve the quality of paper for bags, SN Applied Sciences 2(4):1-12 (2020).

10.1007/s42452-020-2529-2
18

Xiong, Z., Li, X., Wang, J., Bian, F., and Lin, J., An ultralow base weight of nanocellulose boosting filtration performance of hierarchical composite air filter inspired by native spider web, Composites Part B: Engineering 226: 109342 (2021).

10.1016/j.compositesb.2021.109342
19

Sim, K. M., Park, H. S., Bae, G. N., and Jung, J. H., Antimicrobial nanoparticle-coated electrostatic air filter with high filtration efficiency and low pressure drop, Science of The Total Environment 533:266-274 (2015).

10.1016/j.scitotenv.2015.07.003
20

Souzandeh, H., Scudiero, L., Wang, Y., and Zhong, W. H., A disposable multi-functional air filter: Paper towel/protein nanofibers with gradient porous structures for capturing pollutants of broad species and sizes, ACS Sustainable Chemistry & Engineering 5(7):6209-6217 (2017).

10.1021/acssuschemeng.7b01160
21

Kim, K. J., Hong, S. B., and Eom, T. J., Preparation of Eucalyptus pulp by mild condition of low-temperature, atmospheric pressure, and short-reaction-time with high-boiling-point solvent and pulp properties, Cellulose 25(1):753-761 (2018).

10.1007/s10570-017-1564-7
22

Ryu, J. A., Choi, H. S., and Lee, J. M., Dissolution and regeneration of residual lignin-controlled micronized-residues by washing methods, Jounal of Korea TAPPI 53(1):38-46 (2021).

10.7584/JKTAPPI.2021.02.53.1.38
23

Yang, Z., Xu, S., Ma, X., and Wang, S., Characterization and acetylation behavior of bamboo pulp, Wood Science and Technology 42(8):621-632 (2008).

10.1007/s00226-008-0194-5
24

Zhang, J., Song, H., Lin, L., Zhuang, J., Pang, C., and Liu, S., Microfibrillated cellulose from bamboo pulp and its properties, Biomass and Bioenergy 39:78-83 (2012).

10.1016/j.biombioe.2010.06.013
25

He, J., Cui, S., and Wang, S. Y., Preparation and crystalline analysis of high‐grade bamboo dissolving pulp for cellulose acetate, Journal of Applied Polymer Science 107(2):1029-1038 (2008).

10.1002/app.27061
26

Li, W., Wang, R., and Liu, S., Nanocrystalline cellulose prepared from softwood kraft pulp via ultrasonic-assisted acid hydrolysis, BioResources 6(4):4271-4281 (2011).

27

Xu, Q., Gao, Y., Qin, M., Wu, K., Fu, Y., and Zhao, J., Nanocrystalline cellulose from aspen kraft pulp and its application in deinked pulp, International Journal of Biological Macromolecules 60:241-247 (2013).

10.1016/j.ijbiomac.2013.05.038
28

Jo, H. M., Lee, J. Y., Kim, S. H., and Lee, Y. H., Strength improvement of the coloring paper for fruit bag by using non-woody bamboo kraft pulp, Jounal of Korea TAPPI 52(6):132-139 (2020).

10.7584/JKTAPPI.2020.12.52.6.132
29

Bhat, K. M., Bhat, K. V., and Dhamodaran, T. K., Wood density and fiber length of Eucalyptus grandis grown in Kerala, India, Wood and Fiber Science 22(1):54-61 (1990).

30

Basiji, F., Safdari, V., Nourbakhsh, A., and Pilla, S., The effects of fiber length and fiber loading on the mechanical properties of wood-plastic (polypropylene) composites, Turkish Journal of Agriculture and Forestry 34(3):191-196 (2010).

31

Chen, Z., Zhang, H., He, Z., Zhang, L., and Yue, X., Bamboo as an emerging resource for worldwide pulping and papermaking, BioResources 14(1):3-5 (2019).

10.15376/biores.14.1.3-5
32

Choi, K. H., Kim, A. R., and Cho, B. U., Effects of alkali swelling and beating treatments on properties of kraft pulp fibers, BioResources 11(2):3769-3782 (2016).

10.15376/biores.11.2.3769-3782
33

Larsson, P. T., Lindström, T., Carlsson, L. A., and Fellers, C., Fiber length and bonding effects on tensile strength and toughness of kraft paper, Journal of materials science 53(4):3006-3015 (2018).

10.1007/s10853-017-1683-4
34

Rhim, J. W., Effect of moisture content on tensile properties of paper-based food packaging materials, Food Science and Biotechnology 19(1):243-247 (2010).

10.1007/s10068-010-0034-x
35

Yoon, S.-H., Process-dynamic model for stock-fluid in a pressurized paper machine headbox 31(3):35-46(1999)

Information
  • Publisher :Korea Technical Association of The Pulp and Paper Industry
  • Publisher(Ko) :한국펄프종이공학회
  • Journal Title :Journal of Korea TAPPI
  • Journal Title(Ko) :펄프종이기술
  • Volume : 54
  • No :1
  • Pages :65-72
  • Received Date : 2022-02-04
  • Revised Date : 2022-02-16
  • Accepted Date : 2022-02-19
  • DOI :https://doi.org/10.7584/JKTAPPI.2022.2.54.1.65
Journal Informaiton Journal of Korea TAPPI Journal of Korea TAPPI
Online Submission
  • scopus
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crosscheck
  • orcid
Journal Informaiton Journal Informaiton - close