All Issue

2018 Vol.50, Issue 4 Preview Page
Effect of Dry Strength Agent on Physical Properties of Paperboard Containing Organic Filler Made from Agricultural Byproduct

지력증강제 투입에 따른 농업부산물 유기충전제 적용 판지의 물성 평가

Ji Young Lee
,
Hae Min Jo1
,
Tae Ung Park1
,
Kyung Min Kim1
,
Chul Hwan Kim†
이지영
,
조해민 1
,
박태웅 1
,
김경민 1
,
김철환 †
Dept. of Environmental Materials Science/IALS, Gyeongsang National University, Jinju, 52828
1Dept. of Forest Products, Gyeongsang National University, Jinju, 52828
경상대학교 환경재료과학과/농업생명과학연구원
1경상대학교 임산공학과
†Corresponding author: E-Mail: jameskim@gnu.ac.kr
30 August 2018. pp. 54-60
PDF XML Citation
Abstract

In this study, the effect of dry strength agents on the physical properties of sheets containing organic filler made from rice husk (RH) was investigated. KOCC was used to make handsheets containing RH and empty fruit bunch (EFB), and the bulk and strength of the sheets were analyzed. To determine the effect of dry strength agents on paper strength, handsheets containing 9% RH organic filler were made by adding cationic polyacrylamide (C-PAM) and amphoteric polyacrylamide (Am-PAM) and their strengths were measured.

Handsheet bulk increased as the amount of organic filler increased, but a reduction in paper strength was also observed. However, when C-PAM and Am-PAM were added to the stock, the breaking length, compressive strength, burst strength, and stiffness of the handsheets were improved as a function of the level of addition. Significant difference between the performances of C-PAM and Am-PAM was not observed as the level of addition increased from 3% to 9%. Ultimately, it was concluded that the use of dry strength agents could be a solution for the reduction in paper strength when organic fillers are applied.

Keywords
Agricultural byproduct
rice husk
organic filler
bulk
strength
dry strength agent
References

Literature Cited

1
A. Kiviranta, TAPPI Press, Atlanta, Paperboard grades in paper and board grades, Papermaking Science and Technology, Vol. 18; 54-72 (1997)

Kiviranta, A., Paperboard grades in paper and board grades, Papermaking Science and Technology, Vol. 18, Ch. 2, TAPPI Press, Atlanta, pp. 54-72 (1997).

2
C. Ackermann, L. Göttsching and H. Pakarinen, TAPPI Press, Atlanta, Papermaking potential of recycled fiber in recycled fiber and deinking, Papermaking Science and Technology, Vol. 7; 359-433 (1997)

Ackermann, C., Göttsching, L., and Pakarinen, H., Papermaking potential of recycled fiber in recycled fiber and deinking, Papermaking Science and Technology, Vol. 7, Ch. 10, TAPPI Press, Atlanta, pp. 359-433 (1997).

3
H. Kermanian, Z. Razmpour, O. Ramezani, S. Mahdavi, M. Rahmaninia and H. Ashrari, BioResources, The influence of refining history of waste NSSC paper on its recyclability, 8(4); 5424-5434 (2013)

Kermanian, H., Razmpour, Z., Ramezani, O., Mahdavi, S., Rahmaninia, M., and Ashrari, H., The influence of refining history of waste NSSC paper on its recyclability, BioResources 8(4):5424-5434 (2013).

10.15376/biores.8.4.5424-5434
4
J. Y. Lee, C. H. Kim, D. J. Seo, G. B. Lim, S. Y. Kim, J. H. Park and E. H. Kim, Tappi Journal, Fundamental study on developing wood powder as an additive of paperboard, 13(11); 17-22 (2014)

Lee, J. Y., Kim, C. H., Seo, D. J., Lim, G. B., Kim, S. Y., Park, J. H., and Kim, E. H., Fundamental study on developing wood powder as an additive of paperboard, Tappi Journal 13(11):17-22 (2014).

5
J. Y. Lee, C. H. Kim, J. S. Choi, B. H. Kim, G. B. Lim and D. M. Kim, Journal of Korea TAPPI, Development of new powdered additive and its application for improving the paperboard bulk and reducing drying energy (I) - Analysis of chemical and physical properties of brewers grain, 44(2); 58-66 (2012)

Lee, J. Y., Kim, C. H., Choi, J. S., Kim, B. H., Lim, G. B., and Kim, D. M., Development of new powdered additive and its application for improving the paperboard bulk and reducing drying energy (I) - Analysis of chemical and physical properties of brewers grain, Journal of Korea TAPPI 44(2):58-66 (2012).

10.7584/ktappi.2012.44.2.058
6
J. Y. Lee, D. J. Seo and K. T. Yoon, Method for wood powder for use in papermaking and method for bulky paper having thereof (2009)

Lee, J. Y., Seo, D. J., and Yoon, K. T., Method for wood powder for use in papermaking and method for bulky paper having thereof, Korean Pat. 10-0898383 (2009).

7
B. Krogerus, Fillers and pigments in papermaking chemistry, Papermaking Science and Technology, Vol. 4; 116-149, Atlanta. TAPPI Press. (1997)

Krogerus, B., Fillers and pigments in papermaking chemistry, Papermaking Science and Technology, Vol. 4, Ch. 5, TAPPI Press, Atlanta, pp. 116-149 (1997).

8
J. Y. Lee, C. H. Kim, G. B. Lim, S. Y. Kim and J. H. Park, Appita J, Brewers’ grain as an alternative organic filler to wood powder, 65(2); 122-127 (2014)

Lee, J. Y., Kim, C. H., Lim, G. B., Kim, S. Y., and Park, J. H., Brewers’ grain as an alternative organic filler to wood powder, Appita J. 65(2):122-127 (2014).

9
H. G. Fairchild, Tappi Journal, Increasing the filler content of PCC-filled alkaline papers, 75(8); 85-90 (1992)

Fairchild, H. G., Increasing the filler content of PCC-filled alkaline papers, Tappi Journal 75(8):85-90 (1992).

10
S. Mabbe and R. Harvey, Filler flocculation technology - Increasing filler content without loss in strength or runnability parameters2000 Tappi Papermakers Conference and Trade Fair 2; 797-809 (2000)

Mabbe, S. and Harvey, R., Filler flocculation technology - Increasing filler content without loss in strength or runnability parameters, 2000 Tappi Papermakers Conference and Trade Fair 2, pp. 797-809 (2000).

11
J. Y. Lee, C. H. Kim, E. H. Kim, T. U. Park and H. M. Jo, Journal of Korea TAPPI, Study on the use of oil palm trunk in paper industry, 48(6); 241-246 (2016)

Lee, J. Y., Kim, C. H., Kim, E. H., Park, T. U., and Jo, H. M., Study on the use of oil palm trunk in paper industry, Journal of Korea TAPPI 48(6):241-246 (2016).

10.7584/jktappi.2016.12.48.6.241
12
D. S. Kim, Y. J. Sung, C. H. Kim and S. B. Kim, Journal of Korea TAPPI, Evaluation of the applicability of oil palm EFB fines as a functional organic filler, 46(1); 56-64 (2014)

Kim, D. S., Sung, Y. J., Kim, C. H., and Kim, S. B., Evaluation of the applicability of oil palm EFB fines as a functional organic filler, Journal of Korea TAPPI 46(1):56-64 (2014).

10.7584/ktappi.2014.46.1.056
Information
  • Publisher :Korea Technical Association of The Pulp and Paper Industry
  • Publisher(Ko) :한국펄프종이공학회
  • Journal Title :Journal of Korea TAPPI
  • Journal Title(Ko) :펄프종이기술
  • Volume : 50
  • No :4
  • Pages :54-60
  • Received Date : 2018-07-23
  • Revised Date : 2018-08-16
  • Accepted Date : 2018-08-17
  • DOI :https://doi.org/10.7584/JKTAPPI.2018.08.50.4.54
Journal Informaiton Journal of Korea TAPPI Journal of Korea TAPPI
Online Submission
  • scopus
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crosscheck
  • orcid
Journal Informaiton Journal Informaiton - close