All Issue

2022 Vol.54, Issue 4 Preview Page
A Study on the Classification of European Copy Papers with Infrared Spectroscopy and Principal Component Analysis

적외선 분광법과 주성분분석에 의한 유럽산 복사용지의 분류특성 연구

Jinho Kim1
,
Kwang-Ho Kang2
,
Kang-Jae Kim3†
김진호 1
,
강광호 2
,
김강재 3†
1Department of Wood Science and Technology, Kyungpook National University
2RnD Team, HP Printing Korea
3Major in Wood Science and Technology, School of Forestry, Science and Landscape Architecture & Agricultural Science and Technology Research Institute, Kyungpook National University
1경북대학교 임산공학과, 학생
2에이치피프린팅코리아(유) RnD 팀, 차장
3경북대학교 산림과학·조경학부 임산공학전공 및 농업과학기술연구소, 교수
†Corresponding author: E-Mail: jaeya0624@knu.ac.kr (Address: Major in Wood Science and Technology, School of Forestry, Science and Landscape Architecture, Kyungpook National University, Republic of Korea)
30 August 2022. pp. 34-41
PDF XML Citation
Abstract

There are several approaches to evaluate characteristics of a paper and classify them. In recent studies, mathematical and statistical disciplines are widely applied on chemical data in different academic fields. One method which involves multivariate analysis was tested to confirm whether it is applicable for copy papers produced in Europe by a paper company. In this study, an infra-red (IR) spectroscopy and multivariate analysis were applied for specific paper products. The chemical properties of samples were obtained via attenuated total reflection-IR spectroscopy and then, processed with a principal component analysis to verify whether classification occurred. The results revealed that this method works to classify copy paper products made in Europe.

Keywords
European copy paper
infra-red spectroscopy
principal component analysis
multivariate analysis
functional group
References

Literature Cited

1

Kang, K. H., Kim, J. H. and Kim, K. J., Analysis of classification characteristics of Americas copy paper using the infrared spectroscopy and principal component analysis, Journal of the Korean Data & Information Science Society 32(6):1195-1204 (2021).

10.7465/jkdi.2021.32.6.1195
2

Moutinho, I. M. T., Ferreira, P. J. T., Figueiredo, F. and Margarida L., Paper surface chemistry as a tool to improve inkjet printing quality, BioResources 6(4):4259-4270 (2011).

3

Kim, J. H., Chae, B. N. and Lee, S. W., Infrared spectroscopy for polymer materials, Polymer Science and Technology 30(5):433-438 (2019).

4

Causin, V., Marega, C., Marigo, A., Casamassima, R., Peluso, G. and Ripani, L., Forensic differentiation of paper by X-ray diffraction and infrared spectroscopy, Forensic Science International 197:70-74 (2010).

10.1016/j.forsciint.2009.12.056
5

Kim, K. J. and Eom, T. J., Classification of papers using IR and NIR spectra and principal component analysis, Journal of Korea TAPPI 48(1):34-42 (2016).

10.7584/ktappi.2016.48.1.034
6

Horikawa, Y., Mizuno-Tazuru, S. and Sugiyama, J., Near-infrared spectroscopy as a potential method for identification of anatomically similar Japanese diploxylons, J Wood Sci 61:251-261 (2015).

10.1007/s10086-015-1462-2
7

Nelson, M. L. and O’Connor, R. T., Relation of certain infrared bands to cellulose crystallinity and crystal lattice type. Part II. A new Infrared ratio for estimation of crystallinity in cellulose I and II, Journal of Applied Polymer Science 8:1325-1341 (1964).

10.1002/app.1964.070080323
8

Široky, J., Blackburn, R. S., Bechtold, T., Taylor, J. and White, P., Attenuated total reflectance Fourier-transform Infrared spectroscopy analysis of crystallinity changes in lyocell following continuous treatment with sodium hydroxide, Cellulose 17:103-115 (2010).

10.1007/s10570-009-9378-x
9

Savitzky, A. and Golay, M. J. E., Smoothing and differentiation of data by simplified least squares procedures, Analytical Chemistry 36(8):1627-1639 (1964).

10.1021/ac60214a047
10

Horikawa, Y., Hirano, S., Mihashi, A., Kobayashi, Y., Zhai, S. and Sugiyama, J., Prediction of lignin contents from infrared spectroscopy: chemical digestion and lignin/biomass ratios of cryptomeria japonica, Applied Biochemistry and Biotechnology 188:1066-1076 (2019).

10.1007/s12010-019-02965-8
11

Schwanninger, M., Rodrigues, J. C., Pereira, H. and Hinterstoisser, B., Effects of short-time vibratory ball milling on the shape of FT-IR spectra of wood and cellulose, Vibrational Spectroscopy 36:23-40 (2004).

10.1016/j.vibspec.2004.02.003
12

Sammons, R. J., Harper, D. P., Labbė, N., Bozell, J. J., Elder, T. and Rials, T. G., Characterization of organosolv lignins using thermal and FT-IR spectroscopic analysis, BioResources 8(2):2752-2767 (2013).

10.15376/biores.8.2.2752-2767
13

Ȧkerholm, M. and Salmėn, L., Interactions between wood polymers studied by dynamic FT-IR spectroscopy, Polymers 42:963-969 (2001).

10.1016/S0032-3861(00)00434-1
14

Fahey, L. M., Nieuwoudt, M. K. and Harris, P. J., Predicting the cell-wall compositions of Pinus radiata (radiata pine) wood using ATR and transmission FTIR spectroscopies, Cellulose 24:5275-5293 (2017).

10.1007/s10570-017-1506-4
Information
  • Publisher :Korea Technical Association of The Pulp and Paper Industry
  • Publisher(Ko) :한국펄프종이공학회
  • Journal Title :Journal of Korea TAPPI
  • Journal Title(Ko) :펄프종이기술
  • Volume : 54
  • No :4
  • Pages :34-41
  • Received Date : 2022-07-01
  • Revised Date : 2022-07-22
  • Accepted Date : 2022-07-26
  • DOI :https://doi.org/10.7584/JKTAPPI.2022.08.54.4.34
Journal Informaiton Journal of Korea TAPPI Journal of Korea TAPPI
Online Submission
  • scopus
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crosscheck
  • orcid
Journal Informaiton Journal Informaiton - close