All Issue

2021 Vol.53, Issue 5 Preview Page
Analysis of Ink for Woodblock Printing of Samguk Yusa (II) : Ink with High Solid Content

삼국유사 목판본 인출용 먹의 특성 분석 (II) : 높은 고형분 함량의 먹물

Kang-Jae Kim1
,
Tae-Jin Eom1†
김강재 1
,
엄태진 1†
1Major in Wood Science and Technology, School of Forestry, Science and Landscape Architecture & Agricultural Science and Technology Research Institute, Kyungpook National University
1경북대학교 산림과학·조경학부 임산공학전공 및 농업과학기술연구소, 교수
†Corresponding author: E-Mail: tjeom@knu.ac.kr (Address: Major in Wood Science and Technology, School of Forestry, Science and Landscape Architecture & Agricultural Science and Technology Research Institute, Kyungpook National University, 80, Daehak-ro, Buk-gu, Daegu 41566, Republic of Korea)
30 October 2021. pp. 35-42
PDF XML Citation
Abstract

This study analyzes the physical and chemical properties of ink with high solid content for the woodblock printing of Samguk Yusa. Compared with pine or oil soot inks, the organic ingredients in ink for the woodblock printing of Samguk Yusa had a higher nitrogen concentration and the inorganic elements had a lower ash level. In addition, in the IR analysis, C=C bonds of 1650–1620 cm-1 intensity were confirmed in the ink for the woodblock printing of Samguk Yusa, and the average particle diameter of these inks was confirmed to be about 61 nm. Because of the glue used in the ink’s production, the ink had a higher cohesive force and was less smeared on the Hanji. When dried in UV irradiation, it appears that the color of the printed part on Hanji will become more distinct.

Keywords
Samguk yusa
woodblock printing
carbon black
particle size
elemental analysis
References

Literature Cited

1

Cultural Heritage Administration, Samguk Yusa, https://www.heritage.go.kr.

2

Doopedia, Samguk Yusa, https://www.doopedia.co.kr.

3

구인환, 삼국유사, 신원문화사, 서울 (2002).

4

이기백, 삼국유사의 사학사적 의의, 진단학보 36:162-165 (1973).

5

이병기, 한국서지의 연구(하), 동방학지 5(3):31-44 (1961).

6

Kim, K. J. and Eom, T. J., Printing inks of the annals of the Joseon Dynasty, Restaurator. International Journal for the Preservation of Library and Archival Material 39(1):19-32 (2018).

10.1515/res-2017-0012
7

Kim, K. J. and Eom, T. J., Analysis of ink for the woodblock printing of Samguk Yusa(I)-Ink with low solid content-, Journal of Korea TAPPI 53(3):23-28 (2021).

10.7584/JKTAPPI.2021.06.53.3.23
8

Buthe, A., Hartmeier, W., and Ansorge-Schumacher, A. B., Novel solvent-based method for preparation of alginate beads with improved roundness and predictable size, Journal of Microencapsulation 21:865-876 (2004).

10.1080/02652040400015478
9

Kim, K. J. and Eom, T. J., Characterization and comparison of oriental ink sitcks, Journal of Korea TAPPI 40(4):74-81 (2008).

10

Tamechika makoto, 墨と硯と紙の話, 大耳社, pp. 2-59 (2003).

11

Afreen, S., Kokubo, K., Muthoosamy, K., and Manickam, S., Hydration or hydroxylation: direct synthesis of fullerenol from pristine fullerene [C60] via acoustic cavitation in the presence of hydrogen peroxide, RSC Advances 7(51):31930-31939 (2017).

10.1039/C7RA03799F
12

Nam, T. G., Shin, S. J., Park, W. K., and Kim, B. R., Analysis of characterization on ancient ink stick, Journal of Conservation Science 28(2):165-173 (2012).

10.12654/JCS.2012.28.2.165
Information
  • Publisher :Korea Technical Association of The Pulp and Paper Industry
  • Publisher(Ko) :한국펄프종이공학회
  • Journal Title :Journal of Korea TAPPI
  • Journal Title(Ko) :펄프종이기술
  • Volume : 53
  • No :5
  • Pages :35-42
  • Received Date : 2021-09-17
  • Revised Date : 2021-10-09
  • Accepted Date : 2021-10-11
  • DOI :https://doi.org/10.7584/JKTAPPI.2021.10.53.5.35
Journal Informaiton Journal of Korea TAPPI Journal of Korea TAPPI
Online Submission
  • scopus
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crosscheck
  • orcid
Journal Informaiton Journal Informaiton - close