Surface Modification of Cellulose Nanofibrils by Carboxymethylation and TEMPO-Mediated Oxidation

Kyujeong Sim; Hye Jung Youn; Yeonhee Jo

doi:10.7584/ktappi.2015.47.2.042

All Issue

2015 Vol.47, Issue 2 Preview Page Next Page

Surface Modification of Cellulose Nanofibrils by Carboxymethylation and TEMPO-Mediated Oxidation 카르복시메틸화 및 TEMPO 촉매 산화 처리에 의한 셀룰로오스 나노피브릴의 표면 개질

30 April 2015. pp. 42-52

PDF XML

Abstract

In this study, cellulose nanofibrils (CNF) were modified through carboxymethylation or TEMPO-mediated oxidation and their effects on ionicity and characteristics of sheet, film, and foam were investigated. Carboxymethylation was carried out on pulp fibers as a pre-treatment before preparation of CNF. The gel-like and translucent CNF hydrogel was obtained by grinding of carboxymethylated cellulose fibers. Carboxymethylated CNF film and freeze dried sheet showed higher transparency than that of untreated CNF. The CNF sheet with high strength and the CNF foam without large ice crystals were obtained by using the carboxymethylated CNF. TEMPO-mediated oxidation was carried out as a post-treatment of CNF. The zeta potential and charge demand of TEMPO-oxidized CNF were increased with an increase in oxidation time and addition amount of NaClO. The density of sheet made of TEMPO oxidized CNF was increased with the amount of oxidizing agent. The TEMPO oxidized cellulose nanofiber (TOCN) which was obtained from supernatant after centrifugation could be converted to transparent film.

Keywords

Cellulose nanofibrils

Carboxymethylation

TEMPO-mediated oxidation

Charge property

Film

sheet

References

Literature Cited

S. Iwamoto, A. N. Nakagaito and H. Yano, Applied Physics A, Nano-fibrillation of pulp fibers for the processing of transparent nanocomposites, 89; 461-466 (2007)10.1007/s00339-007-4175-6

G. Rodionova, M. Lenes, Ø. Eriksen and Ø. Gregersen, Cellulose, Surface chemical modification of microfibrillated cellulose: Improvement of barrier properties for packaging applications, 18; 127-134 (2011)10.1007/s10570-010-9474-y

I. Siró and D. Plackett, Cellulose, Microfibrillated cellulose and new nanocomposite materials: A review, 17; 459-494 (2010)10.1007/s10570-010-9405-y

H. Cai, S. Sharma, W. Liu, W. Mu, W. Liu, X. Zhang and Y. Deng, Biomacromolecules, Aerogel microspheres from natural cellulose nanofibrils and their application as cell culture scaffold, 15; 2540-2547 (2014)10.1021/bm5003976

D. V. Plackett, K. Letchford, J. K. Jackson and H. M. Burt, Nordic Pulp & Paper Research Journal, A review of nanocellulose as a novel vehicle for drug delivery, 29; 105-118 (2014)10.3183/NPPRJ-2014-29-01-p105-118

Y. V. Sood, R. Tyagi, S. Tyagi, P. C. Pande and R. Tondon, J. Scientific & Industrial Research, Surface charge of different paper making raw materials and its influence on paper properties, 69; 300-304 (2010)

K. Sim, H. J. Youn, J. Ahn, J. Lee, H. Lee and Y. Jo, Journal of Korea TAPPI, Surface modification of nanofibrillated cellulose by LbL (Layer-by-Layer) multilayering and its effect on the dewatering ability of suspension, 46(1); 46-55 (2014)10.7584/ktappi.2014.46.1.046

M. J. Yoon, S. J. Doh and J. N. Im, Fibers and Polymers, Preparation and characterization of carboxymethyl cellulose nonwovens by a wet-laid process, 12(2); 247-251 (2011)10.1007/s12221-011-0247-5

H. A. Ambjörnsson, K. Schenzel and U. Germgåard, Bioresources, Carboxymethyl cellulose produced at different mercerization conditions and characterized by NIR FT raman spectroscopy in combined with multivariate analytical methods, 8(2); 1918-1932 (2013)

M. Ankerfors, Microfibrillated cellulose: energy-efficient preparation techniques and key properties, Sweden. Innventia AB and KTH. (2012)

A. Isogai, T. Saito and H. Fuluzumi, Nanoscale, TEMPO-oxidized cellulose nanofibers, 3; 71-85 (2011)10.1039/C0NR00583E

T. Saito, S. Kimura, Y. Nishiyama and A. Isogai, Biomacromolecules, Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose, 8; 2485-2491 (2007)10.1021/bm0703970

J. Ryu, K. Sim and H. J. Youn, Journal of Korea TAPPI, Evaluation of dewatering of cellulose nanofibrils suspension and effect of cationic polyelectrolyte addition on dewatering, 46(6); 78-86 (2014)10.7584/ktappi.2014.46.6.078

K. Sim, J. Ryu and H. J. Youn, Fibers and Polymers, Structural characteristics of nanofibrillated cellulose mats: effect of preparation conditions, 16(2); 294-301 (2015)10.1007/s12221-015-0294-4

D. L. Pavia, G. M. Lampman and G. S. Kriz, 2nd (ed). Introduction to spectroscopy: a guide for students of organic chemistry, Saunders College Publishing. (1996)

A. H. Saputra, L. Qadhayna and A. B. Pitaloka, International Journal of Chemical Engineering and Applications, Synthesis and characterization of carboxymethyl cellulose (CMC) from water hyacinth using ethanol-isobutyl alcohol mixture as the solvents, 5(1); 36-40 (2014)10.7763/IJCEA.2014.V5.347

H. Fukuzumi, T. Saito, T. Iwata, Y. Kumamoto and A. Isogai, Biomacromolecules, Transparent and high gas barrier films of cellulose nanofibers prepared by TEMPO-mediated oxidation, 10; 162-165 (2009)10.1021/bm801065u

Information

Publisher :Korea Technical Association of The Pulp and Paper Industry
Publisher(Ko) :한국펄프종이공학회
Journal Title :Journal of Korea TAPPI
Journal Title(Ko) :펄프종이기술
Volume : 47
No :2
Pages :42-52
Received Date : 2015-04-06
Revised Date : 2015-04-20
Accepted Date : 2015-04-23
DOI :https://doi.org/10.7584/ktappi.2015.47.2.042

Journal of Korea TAPPI ISSN:0253-3200(Print) 펄프종이기술

All Issue

Literature Cited