All Issue

2019 Vol.51, Issue 3 Preview Page
Paper and Paper Microfluidics for Analytical Devices and Sensors
Wonjin Shin
,
Tusan Park†
Department of Bio-industrial Machinery Engineering, Kyungpook National University, Daegu, 41566
†Corresponding author: E-Mail: tusan.park@knu.ac.kr
30 June 2019. pp. 77-89
PDF XML Citation
Abstract

Paper, as a material, has been attracting considerable attention for developing analytical devices and sensors after the introduction of a simple and easy method for patterning hydrophobic materials on paper. In this study, a survey is conducted and statistical data are produced by taking into account a number of published articles on paper research for the last 10 years since 2008. Technologies related to patterning hydrophobic materials on paper, namely, wax printing and photolithography methods, are also introduced. Accordingly, representative cases of using paper as a material to develop analytical devices and sensors have been introduced in the biomedical, food safety, agriculture, and environment fields. The use of paper in the development of analytical devices and sensors provides the following advantages: i) no need for additional apparatus to operate; ii) biomolecules can be immobilized using cellulose surface chemistry; iii) simple and reproducible patterning on paper; and iv) easy to carry, use, and dispose of the single-use sensor. The number of studies that refer to paper or paper microfluidics, particularly for developing analytical devices and sensors, are expected to constantly increase and gain popularity in various fields.

Keywords
Paper microfluidics
analytical device
sensors
References

Literature Cited

1
C. K. Min, J. Y. Jo and J. S. Shin, Journal of Korea TAPPI, The effect of the application of the acid liquid from rice hull carbonization to molded fiber packages on the shelf life of egg, 50(6); 108-114 (2018)

Min, C. K., Jo, J. Y., and Shin, J. S., The effect of the application of the acid liquid from rice hull carbonization to molded fiber packages on the shelf life of egg, Journal of Korea TAPPI 50(6):108-114 (2018).

10.7584/jktappi.2018.12.50.6.108
2
D. W. Jang and J. M. Park, Journal of Korea TAPPI, Changes of handsheet’s physical properties depending on mixing ratio of bagasse pulp for replacement of hardwood bleached kraft pulp, 49(1); 3-8 (2017)

Jang, D. W. and Park, J. M., Changes of handsheet’s physical properties depending on mixing ratio of bagasse pulp for replacement of hardwood bleached kraft pulp, Journal of Korea TAPPI 49(1):3-8 (2017).

10.7584/jktappi.2017.02.49.1.3
3
G. Kyung, H. Yang, W. Lee, J. Park and S. Ko, Journal of Korea TAPPI, Evaluation of the antibacterial and physical properties of paper coated with chitosan-Ag nanocomposite prepared by green synthesis, 46(4); 28-36 (2014)

Kyung, G., Yang, H., Lee, W., Park, J., and Ko, S., Evaluation of the antibacterial and physical properties of paper coated with chitosan-Ag nanocomposite prepared by green synthesis, Journal of Korea TAPPI 46(4):28-36 (2014).

10.7584/ktappi.2014.46.4.028
4
S. R. Back, L. Melani and H. -J. Kim, Journal of Korea TAPPI, Physical properties and antimicrobial behaviour of food packaging paper by green tea extracts, 49(6); 5-12 (2017)

Back, S. R., Melani, L., and Kim, H. -J., Physical properties and antimicrobial behaviour of food packaging paper by green tea extracts, Journal of Korea TAPPI 49(6):5-12 (2017).

10.7584/jktappi.2017.12.49.6.5
5
Y. -M. Lee, C. -H. Kim, J. -O. Kim, G. -Y. Kim, T. -G. Shin, D. B. Song and C. -Y. Park, Journal of Korea TAPPI, Development of environment-friendly cushioning materials by pulping of waste residual woods, 38(2); 61-71 (2006)

Lee, Y. -M., Kim, C. -H., Kim, J. -O., Kim, G. -Y., Shin, T. -G., Song, D. B., and Park, C. -Y., Development of environment-friendly cushioning materials by pulping of waste residual woods, Journal of Korea TAPPI 38(2):61-71 (2006).

6
G. -Y. Kim, C. -H. Kim, Y. -M. Lee, D. -B. Song, T. -G. Shin, J. -O. Kim and C. -Y. Park, Journal of Korea TAPPI, Utilization of wastepaper fibers for development of environment-friendly shock-absorbing materials, 38(2); 52-60 (2006)

Kim, G. -Y., Kim, C. -H., Lee, Y. -M., Song, D. -B., Shin, T. -G., Kim, J. -O., and Park, C. -Y., Utilization of wastepaper fibers for development of environment-friendly shock-absorbing materials, Journal of Korea TAPPI 38(2):52-60 (2006).

7
Y. J. Sung, M. H. Heo, H. S. Chung and J. Y. Lee, Journal of Korea TAPPI, Effects of the structure and the inorganic filler type on the heat insulation of paper, 46(4); 93-100 (2014)

Sung, Y. J., Heo, M. H., Chung, H. S., and Lee, J. Y., Effects of the structure and the inorganic filler type on the heat insulation of paper, Journal of Korea TAPPI 46(4):93-100 (2014).

10.7584/ktappi.2014.46.4.093
8
J. Y. Lee, C. H. Kim, H. G. Nam, H. H. Park, S. Kwon and Y. M. Lee, Journal of Korea TAPPI, Development of functional pulp tray for prevention of static electricity, 47(5); 52-60 (2015)

Lee, J. Y., Kim, C. H., Nam, H. G., Park, H. H., Kwon, S., and Lee, Y. M., Development of functional pulp tray for prevention of static electricity, Journal of Korea TAPPI 47(5):52-60 (2015).

10.7584/ktappi.2015.47.5.052
9
C. W. Kang and Y. B. Seo, Journal of Korea TAPPI, Sound absorption and sound transmission loss of perforated corrugated board, 50(4); 32-39 (2018)

Kang, C. W. and Seo Y. B., Sound absorption and sound transmission loss of perforated corrugated board, Journal of Korea TAPPI 50(4):32-39 (2018).

10.7584/jktappi.2018.08.50.4.32
10
S. Heydarifard, K. Taneja, G. Bhanjana, N. Dilbaghi, M. M. Nazhad, K. H. Kim and S. Kumar, Carbohydrate Polymers, Modification of cellulose foam paper for use as a high-quality biocide disinfectant filter for drinking water, 181; 1086-1092 (2018)

Heydarifard, S., Taneja, K., Bhanjana, G., Dilbaghi, N., Nazhad, M. M., Kim, K. H., and Kumar, S., Modification of cellulose foam paper for use as a high-quality biocide disinfectant filter for drinking water, Carbohydrate Polymers 181:1086-1092 (2018).

10.1016/j.carbpol.2017.11.038
11
D. W. Kim, D. H. Jung, W. J. Cho, K. C. Sim and H. J. Kim, Journal of Biosystems Engineering, On-site water nitrate monitoring system based on automatic sampling and direct measurement with ion-selective electrodes, 42(4); 350-357 (2017)

Kim, D. W., Jung, D. H., Cho, W. J., Sim, K. C., and Kim, H. J., On-site water nitrate monitoring system based on automatic sampling and direct measurement with ion-selective electrodes, Journal of Biosystems Engineering 42(4):350-357 (2017).

12
S. J. Hong, A. Y. Lee, Y. H. Han, J. Park, J. D. So and G. Kim, Journal of Biosystems Engineering, Rancidity prediction of soybean oil by using near-infrared spectroscopy techniques, 43(3); 219-228 (2018)

Hong, S. J., Lee, A. Y., Han, Y. H., Park J., So, J. D., and Kim, G., Rancidity prediction of soybean oil by using near-infrared spectroscopy techniques, Journal of Biosystems Engineering 43(3):219-228 (2018).

13
J. G. Lim, G. Y. Kim, C. Y. Mo, K. M. Oh, G. S. Kim, H. C. Yoo, H. H. Ham, Y. T. Kim, S. M. Kim and M. S. Kim, Journal of Biosystems Engineering, Rapid and nondestructive discrimination of Fusarium asiaticum and Fusarium graminearum in hulled barley (Hordeum vulgare L.) using near-infrared spectroscopy, 42(4); 301-313 (2017)

Lim, J. G., Kim, G. Y., Mo, C. Y., Oh, K. M., Kim, G. S., Yoo, H. C., Ham, H. H., Kim, Y. T., Kim, S. M., and Kim, M. S., Rapid and nondestructive discrimination of Fusarium asiaticum and Fusarium graminearum in hulled barley (Hordeum vulgare L.) using near-infrared spectroscopy, Journal of Biosystems Engineering 42(4):301-313 (2017).

14
E. Park, S. J. Hong, A. Y. Lee, J. Park, B. K. Cho and G. Kim, Journal of Biosystems Engineering, Phenotyping of low-temperature stressed pepper seedlings using infrared thermography, 42(3); 163-169 (2017)

Park, E., Hong, S. J., Lee, A. Y., Park, J., Cho, B. K., and Kim, G., Phenotyping of low-temperature stressed pepper seedlings using infrared thermography, Journal of Biosystems Engineering 42(3):163-169 (2017).

15
M. R. Ahmed, J. Yasmin, W. H. Lee, C. Mo and B. K. Cho, Journal of Biosystems Engineering, Imaging technologies for nondestructive measurement of internal properties of agricultural products: A review, 42(3); 199-216 (2017)

Ahmed, M. R., Yasmin, J., Lee, W. H., Mo, C., and Cho, B. K., Imaging technologies for nondestructive measurement of internal properties of agricultural products: A review, Journal of Biosystems Engineering 42(3):199-216 (2017).

16
J. Qin, M. S. Kim, K. Chao and B. K. Cho, Journal of Biosystems Engineering, Raman chemical imaging technology for food and agricultural applications, 42(3); 170-189 (2017)

Qin, J., Kim, M. S., Chao, K., and Cho, B. K., Raman chemical imaging technology for food and agricultural applications, Journal of Biosystems Engineering 42(3):170-189 (2017).

17
C. Mo, J. Lim, S. W. Kwon, D. K. Lim, M. S. Kim, G. Kim, J. Kang, K. D. Kwon and B. K. Cho, Journal of Biosystems Engineering, Hyperspectral imaging and partial least square discriminant analysis for geographical origin discrimination of white rice, 42(4); 293-300 (2017)

Mo, C., Lim, J., Kwon, S. W., Lim, D. K., Kim, M. S., Kim, G., Kang, J., Kwon, K. D., and Cho, B. K., Hyperspectral imaging and partial least square discriminant analysis for geographical origin discrimination of white rice, Journal of Biosystems Engineering 42(4):293-300 (2017).

18
Y. Arita, S. Kihara, N. Ouchi, M. Takahashi, K. Maeda, J. Miyagawa, K. Hotta, I. Shimomura, T. Nakamura, K. Miyaoka, H. Kuriyama, M. Nishida, S. Yamashita, K. Okubo, K. Matsubara, M. Muraguchi, Y. Ohmoto, T. Funahashi and Y. Matsuzawa, Biomedical and Biophysical Research Communications, Paradoxical decrease of an adipose-specific protein, adiponectin, in obesity, 257(1); 79-83 (1999)

Arita, Y., Kihara, S., Ouchi N., Takahashi, M., Maeda, K., Miyagawa, J., Hotta, K., Shimomura, I., Nakamura, T., Miyaoka, K., Kuriyama, H., Nishida, M., Yamashita, S., Okubo, K., Matsubara, K., Muraguchi, M., Ohmoto, Y., Funahashi, T., and Matsuzawa, Y., Paradoxical decrease of an adipose-specific protein, adiponectin, in obesity, Biomedical and Biophysical Research Communications 257(1):79-83 (1999).

19
K. S. Kim and J. -K. Park, Lab on a Chip, Magnetic force-based multiplexed immunoassay using superparamagnetic nanoparticles in microfluidic channel, 5(6); 657-664 (2005)

Kim, K. S. and Park, J. -K., Magnetic force-based multiplexed immunoassay using superparamagnetic nanoparticles in microfluidic channel, Lab on a Chip 5(6):657-664 (2005).

20
S. Lee, J. Choi, L. Chen, B. Park, J. B. Kyong, G. H. Seong, J. Choo, Y. Lee, K. -H. Shin, E. K. Lee, S. -W. Joo and K. -H. Lee, Analytical Chimica Acta, Fast and sensitive trace analysis of malachite green using a surface-enhanced raman microfluidic sensor, 590(2); 139-144 (2007)

Lee. S., Choi, J., Chen, L., Park, B., Kyong, J. B., Seong, G. H., Choo, J., Lee, Y., Shin, K. -H., Lee, E. K., Joo, S. -W., and Lee, K. -H., Fast and sensitive trace analysis of malachite green using a surface-enhanced raman microfluidic sensor, Analytical Chimica Acta 590(2):139-144 (2007).

10.1016/j.aca.2007.03.049
21
A. W. Martinez, S. T. Phillips, B. J. Wiley, M. Gupta and G. M. Whitesides, Lap on a Chip, FLASH: A rapid method for prototyping paper-based microfluidic devices, 8(12); 2146-2150 (2008)

Martinez, A. W., Phillips, S. T., Wiley, B. J., Gupta, M., and Whitesides, G. M., FLASH: A rapid method for prototyping paper-based microfluidic devices, Lap on a Chip 8(12):2146-2150 (2008).

10.1039/b811135a
22
E. Carrilho, A. W. Martinez and G. M. Whitesides, Analytical Chemistry, Understanding wax printing: A simple micropatterning process for paper-based microfluidics, 81(16); 7091-7095 (2009)

Carrilho, E., Martinez, A, W., and Whitesides, G. M., Understanding wax printing: A simple micropatterning process for paper-based microfluidics, Analytical Chemistry 81(16):7091-7095 (2009).

10.1021/ac901071p
23
A. W. Martinez, S. T. Phillips, E. Carrilho, S. W. Thomas III, H. Sindi and M. Whitesides, G, Analytical Chemistry, Simple telemedicine for developing regions: Camera phones and paper-based microfluidic devices for real-time, off-site diagnosis, 80(10); 3699-3707 (2008)

Martinez, A, W., Phillips S, T., Carrilho, E., Thomas III, S. W., Sindi, H., and Whitesides, G, M., Simple telemedicine for developing regions: Camera phones and paper-based microfluidic devices for real-time, off-site diagnosis, Analytical Chemistry 80(10):3699-3707 (2008).

10.1021/ac800112r
24
J. Qi, B. Li, X. Wang, Z. Zhang, Z. Wang, J. Han and L. Chen, Sensors and Actuators B, Three-dimensional paper-based microfluidic chip device for multiplexed fluorescence detection of Cu2+ and Hg2+ ions based on ion imprinting technology, 251; 224-233 (2017)

Qi, J., Li, B., Wang, X., Zhang, Z., Wang, Z., Han, J., and Chen, L., Three-dimensional paper-based microfluidic chip device for multiplexed fluorescence detection of Cu2+ and Hg2+ ions based on ion imprinting technology, Sensors and Actuators B 251:224-233 (2017).

10.1016/j.snb.2017.05.052
25
H. Lee and S. Choi, Nano Energy, An origami paper-based bacteria-powered battery, 15; 549-557 (2015)

Lee, H. and Choi, S., An origami paper-based bacteria-powered battery, Nano Energy 15:549-557 (2015).

10.1016/j.nanoen.2015.05.019
26
L. Ge, W. Wang, X. Song, S. Ge and J. Yu, Lab on a Chip, 3D Origami-based multifunction-integrated immunodevice: Low-cost and multiplexed sandwich chemiluminescence immunoassay on microfluidic paper-based analytical device, 12; 3150-3158 (2012)

Ge, L., Wang, W., Song, X., Ge, S., and Yu, J., 3D Origami-based multifunction-integrated immunodevice: Low-cost and multiplexed sandwich chemiluminescence immunoassay on microfluidic paper-based analytical device, Lab on a Chip 12:3150-3158 (2012).

10.1039/c2lc40325k
27
G. Nyström, A. Razaq, M. Strømme, L. Nyholm and A. Mihranyan, Nano Letters, Ultrafast all-polymer paper-based batteries, 9(10); 3635-3639 (2009)

Nyström, G., Razaq, A., Strømme, M., Nyholm, L., and Mihranyan, A., Ultrafast all-polymer paper-based batteries, Nano Letters 9(10):3635-3639 (2009).

28
L. Nyholm, G. Nyström, A. Mihranyan and M. Strømme, Advanced Materials, Toward flexible polymer and paper-based energy storage devices, 23(33); 3751-3769 (2011)

Nyholm, L., Nyström, G., Mihranyan, A., and Strømme, M., Toward flexible polymer and paper-based energy storage devices, Advanced Materials 23(33):3751-3769 (2011).

29
J. Liu, C. Yang, H. Wu, Z. Lin, Z. Zhang, R. Wang, B. Li, F. Kang, L. Shi and C. P. Wong, Energy Environmental Science, Future paper based printed circuit boards for green electronics: Fabrication and life cycle assessment, 7(11); 3674-3682 (2014)

Liu, J., Yang, C., Wu, H., Lin, Z., Zhang, Z., Wang, R., Li, B., Kang, F., Shi, L., and Wong, C. P., Future paper based printed circuit boards for green electronics: Fabrication and life cycle assessment, Energy Environmental Science 7(11):3674-3682 (2014).

10.1039/c4ee01995d
30
G. -W. Huang, H. -M. Xiao and S. -Y. Fu, Nanoscale, Paper-based silver-nanowire electronic circuits with outstanding electrical conductivity and extreme bending stability, 6(15); 8495-8502 (2014)

Huang, G. -W., Xiao, H. -M., and Fu, S. -Y., Paper-based silver-nanowire electronic circuits with outstanding electrical conductivity and extreme bending stability, Nanoscale 6(15):8495-8502 (2014).

10.1039/c4nr00846d
31
S. Merilampi, L. Ukkonen, L. Sydänheimo, P. Ruuskanen and M. Kivikoski, International Journal of Antennas and Propagation, Analysis of silver ink Bow-Tie RFID tag antennas printed on paper substrates, 2007, 90762 (2007)

Merilampi, S., Ukkonen, L., Sydänheimo, L., Ruuskanen, P., and Kivikoski, M., Analysis of silver ink Bow-Tie RFID tag antennas printed on paper substrates, International Journal of Antennas and Propagation 2007:90762 (2007).

10.1155/2007/90762
32
Md. A. Ullah, M. T. Islam, T. Alam and F. B. Asharf, Sensors, Paper-based flexible antenna for wearable telemedicine applications at 2.4 GHz ISM band, 18(12); 4214 (2018)

Ullah, Md. A., Islam M. T., Alam, T., and Asharf, F. B., Paper-based flexible antenna for wearable telemedicine applications at 2.4 GHz ISM band, Sensors 18(12):4214 (2018).

10.3390/s18124214
33
S. Kim, A. Georgiadis and M. M. Tentzeris, Sensors, Design of inkjet-printed RFID-based sensor on paper: Single-and dual-tag sensor topologies, 18(6); 1958 (2018)

Kim, S., Georgiadis, A., and Tentzeris, M. M., Design of inkjet-printed RFID-based sensor on paper: Single-and dual-tag sensor topologies, Sensors 18(6):1958 (2018).

10.3390/s18061958
34
R. -Z. Li, A. Hu, T. Zhang and K. D. Oakes, ACS Applied Materials and Interfaces, Direct writing on paper of foldable capacitive touch pads with silver nanowire inks, 6(23); 21721-21729 (2014)

Li, R. -Z., Hu, A., Zhang, T., and Oakes, K. D., Direct writing on paper of foldable capacitive touch pads with silver nanowire inks, ACS Applied Materials and Interfaces 6(23):21721-21729 (2014).

10.1021/am506987w
35
K. A. Simon, B. Mosadegh, K. T. Minn, M. R. Lockett, M. R. Mohammady, D. M. Boucher, A. B. Hall, S. M. Hillier, T. Udagawa, B. K. Eustace and G, M. Whitesids, Biomaterials, Metabolic response of lung cancer cells to radiation in a paper-based 3D cell culture system, 95; 47-59 (2016)

Simon, K. A., Mosadegh, B., Minn, K. T., Lockett, M. R., Mohammady, M. R., Boucher, D. M., Hall A. B., Hillier, S. M., Udagawa, T., Eustace, B. K., and Whitesids, G, M., Metabolic response of lung cancer cells to radiation in a paper-based 3D cell culture system, Biomaterials 95:47-59 (2016).

10.1016/j.biomaterials.2016.03.002
36
S. H. Kim, K. R. Kim, Y. M. Park, J. H. Hoon, J. W. Hong and H. C. Yoon, Sensors and Actuators B, An animal cell culture monitoring system using a smartphone-mountable paper-based analytical device, 229(28); 166-173 (2016)

Kim, S. H., Kim, K. R., Park, Y. M., Hoon, J. H., Hong, J. W., and Yoon, H. C., An animal cell culture monitoring system using a smartphone-mountable paper-based analytical device, Sensors and Actuators B 229(28):166-173 (2016).

10.1016/j.snb.2016.01.121
37
T. S. Park, W. Li, K. E. McCracken and J. -Y. Yoon, Lab on a Chip, Smartphone quantifies Salmonella from paper microfluidics, 13; 4832-4840 (2013)

Park, T. S., Li, W., McCracken, K. E., and Yoon, J. -Y., Smartphone quantifies Salmonella from paper microfluidics, Lab on a Chip, 13:4832-4840 (2013).

10.1039/c3lc50976a
38
L. Sun, Y. Jiang, R. Pan, M. Li, R. Wang, S. Chen, S. Fu and C. Man, Analytica Chimica Acta, A novel, simple and low-cost paper-based analytical device for colorimetric detection of Cronobacter spp., 1036; 80-88 (2018)

Sun L., Jiang, Y., Pan, R., Li, M., Wang, R., Chen, S., Fu, S., and Man, C., A novel, simple and low-cost paper-based analytical device for colorimetric detection of Cronobacter spp., Analytica Chimica Acta 1036:80-88 (2018).

10.1016/j.aca.2018.05.061
39
W. Alahmad, N. Tungkijanansin, T. Kaneta and P. Varanusupakul, Talanta, A colorimetric paper-based analytical device coupled with hollow fiber membrane liquid phase microextraction (HF-LPME) for highly sensitive detection of hexavalent chromium in water sample, 190; 78-84 (2018)

Alahmad, W., Tungkijanansin, N., Kaneta, T., and Varanusupakul, P., A colorimetric paper-based analytical device coupled with hollow fiber membrane liquid phase microextraction (HF-LPME) for highly sensitive detection of hexavalent chromium in water sample, Talanta 190:78-84 (2018).

10.1016/j.talanta.2018.07.056
40
A. Maity and B. Ghosh, Scientific Reports, Fast response paper based visual color change gas sensor for efficient ammonia detection at room temperature, 8, 16851 (2018)

Maity, A. and Ghosh B., Fast response paper based visual color change gas sensor for efficient ammonia detection at room temperature, Scientific Reports 8:16851 (2018).

10.1038/s41598-018-33365-3
41
J. Qi, B. Li, X. Wang, L. Fu, L. Luo and L. Chen, Analytical Chemistry, Rotational paper-based microfluidic-chip device for multiplexed and simultaneous fluorescence detection of phenolic pollutants based on a molecular-imprinting technique, 90(20); 11827-11834 (2018)

Qi, J., Li, B., Wang, X., Fu, L., Luo, L., and Chen, L., Rotational paper-based microfluidic-chip device for multiplexed and simultaneous fluorescence detection of phenolic pollutants based on a molecular-imprinting technique, Analytical Chemistry 90(20):11827-11834 (2018).

10.1021/acs.analchem.8b01291
42
J. Prabphal, T. Vilaivan and T. Praneenararat, Chemistry Select, Fabrication of a paper-based turn-off fluorescence sensor for Cu2+ ion from a pyridinium porphyrin, 3(3); 894-899 (2018)

Prabphal, J., Vilaivan, T., and Praneenararat, T., Fabrication of a paper-based turn-off fluorescence sensor for Cu2+ ion from a pyridinium porphyrin, Chemistry Select 3(3):894-899 (2018).

10.1002/slct.201702382
43
O. Kwon and T. Park, Journal of Biosystems Engineering, Applications of smartphone cameras in agriculture, environment, and food: A review, 42(4); 330-338 (2017)

Kwon, O. and Park, T., Applications of smartphone cameras in agriculture, environment, and food: A review, Journal of Biosystems Engineering, 42(4):330-338 (2017).

44
E. Jaworska, G. Pomarico, B. B. Berna, K. Maksymiuk, R. Paolesse and A. Michalska, Sensors and Actuators B, All-solid-state paper based potentiometric potassium sensors containing cobalt(II) porphyrin/cobalt(III) corrole in the transducer layer, 277; 306-311 (2018)

Jaworska, E., Pomarico, G., Berna, B. B., Maksymiuk, K., Paolesse, R., and Michalska, A., All-solid-state paper based potentiometric potassium sensors containing cobalt(II) porphyrin/cobalt(III) corrole in the transducer layer, Sensors and Actuators B 277:306-311 (2018).

10.1016/j.snb.2018.08.090
45
A. H. Kamel, H. R. Galal and N. S. Awwad, Analytical Methods, Cost-effective and handmade paper-based potentiometric sensing platform for piperidine determination, 10; 5406-5415 (2018)

Kamel, A. H., Galal, H. R., and Awwad, N. S., Cost-effective and handmade paper-based potentiometric sensing platform for piperidine determination, Analytical Methods 10:5406-5415 (2018).

10.1039/c8ay01811a
46
Y. Panraksa, W. Siangproh, T. Khampieng, O. Chailapakul and A. Apilux, Talanta, Paper-based amperometric sensor for determination of acetylcholinesterase using screen-printed graphene electrode, 178; 1017-1023 (2018)

Panraksa, Y., Siangproh, W., Khampieng, T., Chailapakul, O., and Apilux, A., Paper-based amperometric sensor for determination of acetylcholinesterase using screen-printed graphene electrode, Talanta 178:1017-1023 (2018).

10.1016/j.talanta.2017.08.096
47
E. Nunez-Bajo, M. C. Blanco-López, A. Costa-García and M. T. Fernández-Abedul, Analytical Chemistry, Electrogeneration of gold nanoparticles on porous-carbon paper-based electrodes and application to inorganic arsenic analysis in white wines by chronoamperometric stripping, 89; 6415-6423 (2017)

Nunez-Bajo, E., Blanco-López, M. C., Costa-García, A., and Fernández-Abedul, M. T., Electrogeneration of gold nanoparticles on porous-carbon paper-based electrodes and application to inorganic arsenic analysis in white wines by chronoamperometric stripping, Analytical Chemistry 89:6415-6423 (2017).

10.1021/acs.analchem.7b00144
48
J. Bhardwaj, S. Devarakonda, S. Kumar and J. Jang, Sensors and Actuators B, Development of a paper-based electrochemical immunosensor using an antibody-single walled carbon nanotubes bio-conjugated modified electrode for label-free detection of foodborne pathogens, 253; 115-123 (2017)

Bhardwaj, J., Devarakonda, S., Kumar, S., and Jang, J., Development of a paper-based electrochemical immunosensor using an antibody-single walled carbon nanotubes bio-conjugated modified electrode for label-free detection of foodborne pathogens, Sensors and Actuators B 253:115-123 (2017).

10.1016/j.snb.2017.06.108
49
F. J. V. Gomez, P. A. Reed, D. G. Casamachin, J. R. de la Rosa, G. Chumanov, M. F. Silvaa and C. D. Garcia, Analytical Methods, Carbon tape as a convenient electrode material for electrochemical paper-based microfluidic devices (ePADs), 10; 4020-4027 (2018)

Gomez, F. J. V., Reed, P. A., Casamachin, D. G., de la Rosa, J. R., Chumanov, G., Silvaa, M. F., and Garcia, C. D., Carbon tape as a convenient electrode material for electrochemical paper-based microfluidic devices (ePADs), Analytical Methods 10:4020-4027 (2018).

10.1039/c8ay00778k
50
R. Kawahara, P. Sahatiya, S. Badhulika and S. Uno, Japanese Journal of Applied Physics, Paper-based potentiometric pH sensor using carbon electrode drawn by pencil, 57; 04FM08 (2018)

Kawahara, R., Sahatiya, P., Badhulika, S., and Uno, S., Paper-based potentiometric pH sensor using carbon electrode drawn by pencil, Japanese Journal of Applied Physics 57:04FM08 (2018).

10.7567/jjap.57.04fm08
51
L. Ge, J. Yan, X. Song, M. Yan, S. Ge and J. Yu, Biomaterials, Three-dimensional paper-based electrochemiluminescence immunodevice for multiplexed measurement of biomarkers and point-of-care testing, 33(4); 1024-1031 (2012)

Ge, L., Yan, J., Song, X., Yan, M., Ge, S., and Yu, J., Three-dimensional paper-based electrochemiluminescence immunodevice for multiplexed measurement of biomarkers and point-of-care testing, Biomaterials 33(4):1024-1031 (2012).

10.1016/j.biomaterials.2011.10.065
52
L. Li, Y. Zhang, S. Li, X. Wang, C. Li, S. Ge, J. Yu, M. Yan and X. Song, Journal of Luminescence, Ultrasensitive electrochemiluminescence immunoassay for tumor marker based on quantum dots coated carbon nanospheres, 144; 6-12 (2013)

Li, L., Zhang, Y., Li, S., Wang, X., Li, C., Ge, S., Yu J., Yan, M., and Song, X., Ultrasensitive electrochemiluminescence immunoassay for tumor marker based on quantum dots coated carbon nanospheres, Journal of Luminescence, 144:6-12 (2013).

10.1016/j.jlumin.2013.06.029
53
T. X. Li, Modern Clinical Immunoassay; 178-209, Beijing: China. Military Medical Science Press. (2001)

Li, T. X., Modern Clinical Immunoassay, pp. 178-209, Military Medical Science Press, Beijing: China (2001).

54
J. C. Jokerst, J. A. Adkins, B. Bisha, M. M. Mentele, L. D. Goodridge and C. S. Henry, Analytical Chemistry, Development of a paper-based analytical device for colorimetric detection of select foodborne pathogens, 84(6); 2900-2907 (2012)

Jokerst, J. C., Adkins, J. A., Bisha, B., Mentele, M, M., Goodridge, L. D., and Henry, C. S., Development of a paper-based analytical device for colorimetric detection of select foodborne pathogens, Analytical Chemistry 84(6):2900-2907 (2012).

10.1021/ac203466y
55
Y.-S. Choi, M. R. Lee, C. S. Kim and K. -H. Lee, Review of Scientific Instruments, Detection of proline using a novel paper-based analytical device for on-site diagnosis of drought stress in plants, 90(4); 045002 (2019)

Choi, Y.-S., Lee, M. R., Kim, C. S., and Lee, K. -H., Detection of proline using a novel paper-based analytical device for on-site diagnosis of drought stress in plants, Review of Scientific Instruments 90(4):045002 (2019).

10.1063/1.5055798
56
G. -H. Chen, W. -Y. Chen, Y. -C. Yen, C. -W. Wang, H. -T. Chang and C. -F. Chen, Analytical Chemistry, Detection of mercury(II) ions using colorimetric gold nanoparticles on paper-based analytical devices, 86(14); 6843-6849 (2014)

Chen, G. -H., Chen, W. -Y., Yen, Y. -C., Wang, C. -W., Chang, H. -T., and Chen, C. -F., Detection of mercury(II) ions using colorimetric gold nanoparticles on paper-based analytical devices, Analytical Chemistry 86(14):6843-6849 (2014).

10.1021/ac5008688
Information
  • Publisher :Korea Technical Association of The Pulp and Paper Industry
  • Publisher(Ko) :한국펄프종이공학회
  • Journal Title :Journal of Korea TAPPI
  • Journal Title(Ko) :펄프종이기술
  • Volume : 51
  • No :3
  • Pages :77-89
  • Received Date : 2019-05-22
  • Revised Date : 2019-06-14
  • Accepted Date : 2019-06-17
  • DOI :https://doi.org/10.7584/JKTAPPI.2019.06.51.3.77
Journal Informaiton Journal of Korea TAPPI Journal of Korea TAPPI
Online Submission
  • scopus
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crosscheck
  • orcid
Journal Informaiton Journal Informaiton - close