All Issue

2020 Vol.52, Issue 6
Advanced Technology and Prospect of the Ink-jet Printing (I) : Ink Characteristics and Ink-jet Paper

잉크젯 인쇄의 최신 기술과 전망(제1보) : 잉크의 특성과 잉크젯 용지

Kyoung-Mo Jeong1
,
Yong-Kyu Lee2†
정경모 1
,
이용규 2†
1The Institute of Forest Science, Kangwon Natl. Univ.
2Dept. of Paper Science & Engineering, College of Forest & Environmental Sciences, Kangwon Natl. Univ.
1강원대학교 산림과학연구소, 연구교수
2강원대학교 산림환경과학대학 제지공학과, 교수
†Corresponding author: E-Mail: yklee@kangwon.ac.kr (Address: Dept. of Paper Science & Engineering, College of Forest & Environmental Sciences, Natl. Univ. Chuncheon, 24341, Republic of Korea)
30 December 2020. pp. 5-16
PDF XML Citation
Abstract

The aim of this review is to introduce the information concerning advanced technology of ink-jet printing regarding characteristics and ink-jet paper. It is believed that ink-jet paper having suitable liquid absorption characteristics and drying techniques are required to improve image quality on high-speed inkjet printing. Although the development of high quality ink-jet paper is important, the demand or the dual-purpose coated paper that can be used with offset and ink-jet printing is expected to increase for the time being. Meanwhile, it is important to get cost down and raise the productivity of the ink-jet paper to secure competitiveness comparable to that of offset coated paper. For those objectives we think that the development of new technologies is required for pigment development, composition design of the coating ingredients, and rheological characteristics analysis of coating colors.

Keywords
Ink-jet
coated paper
porous surface
new printing materials
rheology
References

Literature Cited

1

Jeong, K, M., Won, J. M., Lee, Y, K., and Koseki, K., Review: The advanced inkjet printing technology – UV curable jet ink, Journal of Korea TAPPI 46(2):46-56 (2014).

10.7584/ktappi.2014.46.2.046
2

Morita, N., Ueki, H., and Motosugi U., Paper and ink technology applied for high-speed inkjet production printing, Journal of Japan TAPPI 71(6):83-88 (2017).

10.2524/jtappij.1607
3

Kipphan, H.(Ed.), Handbook of print media – Technologies and production methods, Springer New York, pp.711-730 (2001).

10.1007/978-3-540-29900-4
4

Amari, T.(Ed.), Technologies and Materials for inkjet printer, CMC Japan, pp.201-213 (1998).

5

Hata, N. Inkjet technology: Present and future, Journal of Printing Science and Technology, 46(2):77-83 (2009).

6

Lee, H. M. and Lee, Y, K., Studies on the absorption behavior of dye and pigment ink for ink-jet printing, Journal of Korea TAPPI 37(2):47-56 (2005).

7

Lee, Y, K., An, K. H., and Lee, K. S., Influence of mixing ratio of pigments on ink-jet printing properties, Journal of Korea TAPPI 34(1):30-36 (2002).

8

Lee, Y, K. and Lee, H. M., The effect of precipitated calcium carbonate having a small particle size on the print quality of an inkjet-grade paper, Journal of Korea TAPPI 37(2):38-46 (2005).

9

Hanson, E.(Ed.), Recent Progress in Ink Jet Technology II, The Society for Imaging Science and Technology pp.49-62, pp. 462-465 (1999).

10

Yoon, J. Y., Jeong, K, M., Kim, C. H., and Lee, Y, K., Studies on the application of starch for paper surface sizing–The influence of surface sizing treatment with starch on the ink-jet printing property-, Journal of Korea TAPPI 34(1):7-11 (2002).

11

Lee, Y, K. and Kuga, S. A study on the absorption behavior and print quality of color ink-jet paper, Autumn Conference of Korea TAPPI pp.72-80 (1999).

12

Lee, H. M., Kim, C. K. and Lee, Y, K., Influence of the type and blending ratio of binders on ink-jet printing properties, Journal of Korea TAPPI 34(2):22-31 (2002).

13

McFadden, M. G. and Donigian, D. W., Effect of coating structure and optics on inkjet printability, 1999 TAPPI coating conference pp.169-177 (1999).

14

Lyne, M. B. and Aspler, J. S., Paper for ink jet printing, TAPPI Journal, 68(5):106-110 (1985).

15

Londo, M., On-machin coating of inkjet paper possible with modified kaolin, Pulp and Paper Journal, 74(5):37-43 (2000).

16

Capman, D. M., and Michos, D., Novel silica gel for glossy, ink-receptive coating, Journal of Image Science and Technology, 44(5):418-422 (2000).

17

Boylan, J. B., Using polyvinyl alcohol in ink-jet printing paper, TAPPI Journal, 80(1):68-70 (1997).

18

Chapman, D. M. Coating structure effect on ink-jet print quality, 1997 TAPPI coating conference pp.73-93 (1997).

19

Donigian, D. W., Wernett, P. C., McFadden, M. G., and Mckay, J. J., Ink-jet dye fixation and coating pigments, TAPPI Journal 82(8):175-182 (1999).

20

Mielonen, K., Velling, K. and Backfolk, K., The effect of multilayer polyelectrolyte coating on inkjet ink water fastness and rub resistance, Nordic Pulp & Paper Research Journal, 31(1):147-155 (2018).

10.3183/npprj-2016-31-01-p147-155
21

Kim, S. G., Jeong, K. M. and Lee, Y. K., Effective use of binder composition in functional coating(I): Flow characteristics of coating dispersion and properties of coated paper, Journal of Korea TAPPI 52(4):52-56 (2020).

10.7584/JKTAPPI.2020.08.52.4.52
Information
  • Publisher :Korea Technical Association of The Pulp and Paper Industry
  • Publisher(Ko) :한국펄프종이공학회
  • Journal Title :Journal of Korea TAPPI
  • Journal Title(Ko) :펄프종이기술
  • Volume : 52
  • No :6
  • Pages :5-16
  • Received Date : 2020-10-20
  • Revised Date : 2020-11-05
  • Accepted Date : 2020-11-09
  • DOI :https://doi.org/10.7584/JKTAPPI.2020.12.52.6.5
Journal Informaiton Journal of Korea TAPPI Journal of Korea TAPPI
Online Submission
  • scopus
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crosscheck
  • orcid
Journal Informaiton Journal Informaiton - close