Journal of Korea TAPPI ISSN:0253-3200(Print) 펄프종이기술

M. I. Stationwala, Tappi J., Production of high quality and low energy chemithermomechanical pulp, 77(2); 113-119 (1994)

Stationwala, M. I., Production of high quality and low energy chemithermomechanical pulp, Tappi J. 77(2):113-119 (1994).

O. Chagave, C. Heitner and M. Hellstern, Pulp and Paper Canada, The effects of sulphonation and high-intensity refining on the ultra-high-yield pulping of spruce, 106(12); 65-70 (2005)

Chagave, O., Heitner, C., and Hellstern, M., The effects of sulphonation and high-intensity refining on the ultra-high-yield pulping of spruce, Pulp and Paper Canada 106(12):65-70 (2005).

B. Li, H. Li, Q. Zha, R. Bandekar, A. Alsaggaf and Y. Ni, BioResources, Review: Effects of wood quality and refining process on TMP pulp and paper quality, 6(3); 3569-3584 (2011)

Li, B., Li, H., Zha, Q., Bandekar, R., Alsaggaf, A., and Ni, Y., Review: Effects of wood quality and refining process on TMP pulp and paper quality, BioResources 6(3):3569-3584 (2011).

S. Lin and J. Hsieh, Effect of raw material on energy requirement of CTMPTAPPI Engineering Conference; 499-503 (1990)

Lin, S. and Hsieh., J., Effect of raw material on energy requirement of CTMP, TAPPI Engineering Conference, pp. 499-503 (1990).

M. Jackson and G. Åkerlund, The effects of pre-heating and refiner housing pressure on the quality characteristics of TMP and CTMPInternational Mechanical Pulping Conference, Washington D.C., USA; 233-240 (1983)

Jackson, M. and Åkerlund, G., The effects of pre-heating and refiner housing pressure on the quality characteristics of TMP and CTMP, International Mechanical Pulping Conference, Washington D.C., USA, pp. 233-240 (1983).

H. Hoglund, U. Sohlin and G. Tistad, Tappi J., Physical properties of wood in relation to chip refining, 59(6); 144-148 (1976)

Hoglund, H., Sohlin, U., and Tistad, G., Physical properties of wood in relation to chip refining, Tappi J. 59(6):144-148 (1976).

O. Ferritius and S. Moldenius, The effect of impregnation method on CTMP properties1985 International Mechanical Pulping Conference Proceedings, SPCI, Stockholm; 91 (1985)

Ferritius, O. and Moldenius, S., The effect of impregnation method on CTMP properties, 1985 International Mechanical Pulping Conference Proceedings, SPCI, Stockholm, p. 91 (1985).

P. Engstrand, L. Hammar and M. Htun, 1985 International Symposium on Wood and Pulping Chemistry Notes, The kinetics of sulfonation reactions on Norwegian spruce; 275, Motreal. CPPA. (1985)

Engstrand, P., Hammar, L., and Htun, M., The kinetics of sulfonation reactions on Norwegian spruce, 1985 International Symposium on Wood and Pulping Chemistry Notes, CPPA, Motreal, p. 275 (1985).

R. P. Beatson, C. Heitner and D. Atack, J. Pulp Paper Sci., Factors affecting the sulfonation of spruce, 10(1); 12-17 (1984)

Beatson, R. P., Heitner, C., and Atack, D., Factors affecting the sulfonation of spruce, J. Pulp Paper Sci. 10(1):12-17 (1984).

J. Konn, L. Vähäsalo, A. Pranovich and B. Holmbom, Holzforschung, De-esterification and sulfonation in spruce CTMP: Effects on pulp and paper properties, 60(4); 355-364 (2006)

Konn, J., Vähäsalo, L., Pranovich, A., and Holmbom, B., De-esterification and sulfonation in spruce CTMP: Effects on pulp and paper properties, Holzforschung 60(4):355-364 (2006).

10.1515/HF.2006.056

J. Sundholm, Chemimechanical pulpingMechanical Pulping, Papermaking Science and Technology Series Vol. 5; 222-249, Chapter 8, In, PI and TAPPI Press. (1999)

Sundholm, J., Chemimechanical pulping, Chapter 8, In Mechanical Pulping, Papermaking Science and Technology Series Vol. 5, PI and TAPPI Press, pp. 222-249 (1999).

E. Adler, B. O. Lindgren and U. Saedén, Svensk Papperstid, The beta-guaiacyl ether of alpha-veratrylglycerol as a lignin model, 55(7); 245-254 (1952)

Adler, E., Lindgren, B. O., and Saedén, U., The beta-guaiacyl ether of alpha-veratrylglycerol as a lignin model, Svensk Papperstid 55(7):245-254 (1952).

R. Amiri, B. Begin, S. Deshaies and S. Mozaffari, Pulp and Paper Canada, Effects of wood and pulp quality on linting propensity, 105(6); 23-29 (2004)

Amiri, R., Begin, B., Deshaies, S., and Mozaffari, S., Effects of wood and pulp quality on linting propensity, Pulp and Paper Canada 105(6):23-29 (2004).