All Issue

2019 Vol.51, Issue 1 Preview Page
28 February 2019. pp. 92-99
Abstract
References

Literature Cited

1
S. K. Kwon, J. S. Hwang, S. K. Choi and J. S. Kim, J. of the Korean Institute of Military Science and Technology, Effect of CCC composition on burning characteristic for 120 mm kinetic energy ammunition, 8(4); 146-151 (2005)

Kwon, S. K., Hwang, J. S., Choi, S. K., and Kim, J. S., Effect of CCC composition on burning characteristic for 120 mm kinetic energy ammunition, J. of the Korean Institute of Military Science and Technology 8(4):146-151 (2005).

2
F. W. Robbins, J. W. Colburn and C. K. Zoltani, Technical Report, Combustible cartridge cases: Current status and future prospects, U.S. Army Laboratory Command. (1992)

Robbins, F. W., Colburn, J. W., and Zoltani, C. K., Combustible cartridge cases: Current status and future prospects, Technical Report BRL-TR-3383, U.S. Army Laboratory Command (1992).

10.21236/ada254636
3
Department of Defence, Technical Report, Combustible cartridge cases: An account of the current technology and proposals for future development, Australia. Defence Science and Technology Organization Weapons Systems Research Laboratory. (1987)

Department of Defence, Combustible cartridge cases: An account of the current technology and proposals for future development, Technical Report WSRL-0471-TR, Defence Science and Technology Organization Weapons Systems Research Laboratory, Australia (1987).

4
W. T. Yang, J. X. Yang, Y. C. Zhang and S. J. Ying, Defence Technology, A comparative study of combustible cartridge case materials, 13; 127-130 (2017)

Yang, W. T., Yang, J. X., Zhang, .Y. C., and Ying, S. J., A comparative study of combustible cartridge case materials, Defence Technology 13:127-130 (2017).

10.1016/j.dt.2017.02.003
5
T. Lindström, L. Wågberg and T. Larsson, On the nature of joint strength in paper - A review of dry and wet strength resins used in paper manufacturingProceeding of 13th Fundamental Research Symposium, Cambridge, UK; 457-562, In (2005)

Lindström, T., Wågberg, L., and Larsson, T., On the nature of joint strength in paper - A review of dry and wet strength resins used in paper manufacturing, In Proceeding of 13th Fundamental Research Symposium, Cambridge, UK, pp. 457-562 (2005).

6
J. L. DiFlavio, R. Bertoia, R. Pelton and M. Leduc, The mechanism of polyvinylamine wet-strengtheningProceedings of 13th Fundamental Research Symposium, Cambridge, UK; 1293-1361 (2005)

DiFlavio, J. L., Bertoia, R., Pelton, R., and Leduc, M., The mechanism of polyvinylamine wet-strengthening, Proceedings of 13th Fundamental Research Symposium, Cambridge, UK, pp. 1293-1361 (2005).

7
D. J. Son and B. Y. Kim, Journal of Korea TAPPI, Improvement of wet-end performance and paper strength with polyvinylamine, 37(5); 63-69 (2005)

Son, D. J. and Kim, B. Y., Improvement of wet-end performance and paper strength with polyvinylamine, Journal of Korea TAPPI 37(5):63-69 (2005).

8
B. U. Cho, J. Y. Ryu, D. J. Son and B. K. Song, Journal of Korea TAPPI, Application of cationic PVAm - anionic PAM dry strength aids system on a kraft paper mill, 42(3); 50-57 (2010)

Cho, B. U., Ryu, J. Y., Son, D. J., Song, B. K., Application of cationic PVAm - anionic PAM dry strength aids system on a kraft paper mill, Journal of Korea TAPPI 42(3):50-57 (2010).

9
A. Tejado, M. Antal and T. G. M. van de Ven, J-FOR, Effect of EDC/ADH fiber crosslinking on the wet web strength of BHKP with and without PCC loading, 1(1); 27-31 (2011)

Tejado, A., Antal, M., and van de Ven, T. G. M., Effect of EDC/ADH fiber crosslinking on the wet web strength of BHKP with and without PCC loading, J-FOR 1(1):27-31 (2011).

10
R. Gernandt, L. Wågberg, L. Gärdlund and H. Dautzenberg, Colloids and Surfaces A: Physicochem. Eng. Aspects, Polyelectrolyte complexes for surface and modification of wood fibres I - Preparation and characterisation of complexes for dry and wet strength improvement of paper, 213; 15-25 (2003)

Gernandt, R., Wågberg, L., Gärdlund, L., and Dautzenberg, H., Polyelectrolyte complexes for surface and modification of wood fibres I - Preparation and characterisation of complexes for dry and wet strength improvement of paper, Colloids and Surfaces A: Physicochem. Eng. Aspects 213:15-25 (2003).

10.1016/S0927-7757(02)00335-7
11
L. Gärdlund, L. Wågberg and R. Gernandt, Colloids and Surfaces A: Physicochem. Eng. Aspects, Polyelectrolyte complexes for surface and modification of wood fibres II - Influence of complexes on wet and dry strength of paper, 218; 137-149 (2003)

Gärdlund, L., Wågberg, L., and Gernandt, R., Polyelectrolyte complexes for surface and modification of wood fibres II - Influence of complexes on wet and dry strength of paper, Colloids and Surfaces A: Physicochem. Eng. Aspects 218:137-149 (2003).

12
L. Gärdlund, M. Norgren, L. Wågberg and A. Marklund, Nordic Pulp and Paper Res. J., The use of polyelectrolyte complexes (PEC) as strength additives for different pulps used for production of fine paper, 22(2); 210-216 (2007)

Gärdlund, L., Norgren, M., Wågberg, L., and Marklund, A., The use of polyelectrolyte complexes (PEC) as strength additives for different pulps used for production of fine paper, Nordic Pulp and Paper Res. J. 22(2):210-216 (2007).

10.3183/npprj-2007-22-02-p210-216
13
M. C. Lofton, S. M. Moore, M. A. Hubbe and S. Y. Lee, Tappi J., Deposition of polyelectrolyte complexes as a mechanism for developing paper dry strength, 4(9); 3-8 (2005)

Lofton, M. C., Moore, S. M., Hubbe, M. A., and Lee, S. Y., Deposition of polyelectrolyte complexes as a mechanism for developing paper dry strength, Tappi J. 4(9):3-8 (2005).

14
G. Petzold and S. Schwarz, Advanced Polymer Science, Polyelectrolyte complexes in flocculation applications, 256; 25-66 (2014)

Petzold, G. and Schwarz, S., Polyelectrolyte complexes in flocculation applications, Advanced Polymer Science 256:25-66 (2014)

10.1007/12_2012_205
15
D. S. Honig, R. S. Farinato and L. A. Jackson, Nordic Pulp and Paper Research Journal, Design and development of the micropolymer system: An “organic microparticle” retention/drainage system, 15(5); 536-544 (2000)

Honig, D. S., Farinato, R. S., and Jackson, L. A., Design and development of the micropolymer system: An “organic microparticle” retention/drainage system, Nordic Pulp and Paper Research Journal 15(5):536-544 (2000).

10.3183/npprj-2000-15-05-p536-544
16
C. Lewis and M. Polverari, O Papel (Brazil), New micropolymer technologies for increased drainage and retention for both wood and non wood containing furnishes, 69(11); 97-116 (2008)

Lewis, C. and Polverari, M., New micropolymer technologies for increased drainage and retention for both wood and non wood containing furnishes, O Papel (Brazil) 69(11):97-116 (2008).

17
C. H. Jung, J. H. Lee and J. M. Park, Journal of Korea TAPPI, Controllability of white pitch and compatibility of micropolymer on PEO/cofactor retention system and PAM/bentonite retention system, 44(6); 43-49 (2012)

Jung, C. H., Lee, J. H., and Park, J. M., Controllability of white pitch and compatibility of micropolymer on PEO/cofactor retention system and PAM/bentonite retention system, Journal of Korea TAPPI 44(6):43-49 (2012).

10.7584/ktappi.2012.44.6.043
18
V. Kuna, J. Balbercák, E. Opálená, A. Pazitny, A. Russ and J. Schwartz, Wood Research, The effect of multi-component retention systems on the properties of the paper suspensions, 61(5); 767-776 (2016)

Kuna, V., Balbercák, J., Opálená, E., Pazitny, A., Russ, A., and Schwartz, J., The effect of multi-component retention systems on the properties of the paper suspensions, Wood Research 61(5):767-776 (2016).

19
M. Ora, The Effect of Web Structure on Wet Web Runnability, Finland. Aalto University. (2012)

Ora, M., The Effect of Web Structure on Wet Web Runnability, Ph.D. Thesis, Aalto University, Finland (2012).

Information
  • Publisher :Korea Technical Association of The Pulp and Paper Industry
  • Publisher(Ko) :한국펄프종이공학회
  • Journal Title :Journal of Korea TAPPI
  • Journal Title(Ko) :펄프종이기술
  • Volume : 51
  • No :1
  • Pages :92-99
  • Received Date : 2019-01-28
  • Revised Date : 2019-02-18
  • Accepted Date : 2019-02-20