Development of Hybrid Calcium Carbonate for High Loading Paper (I) : Manufacture and Application of Hybrid Calcium Carbonate

Jae Kwon Jung; Yung Bum Seo

doi:10.7584/ktappi.2015.47.4.030

All Issue

2015 Vol.47, Issue 4 Preview Page Next Page

Development of Hybrid Calcium Carbonate for High Loading Paper (I) : Manufacture and Application of Hybrid Calcium Carbonate 고충전지 제조를 위한 하이브리드 탄산칼슘 충전제의 개발 (I) : 하이브리드 탄산칼슘의 제조 및 이용

30 August 2015. pp. 30-37

PDF XML

Abstract

Needs for high ash loading in printing paper increase as green house gas (GHG) emission regulation becomes more stricter and pressure of lowering paper production cost increases. To meet the needs, a new type of filler was developed. The mixture of ground calcium carbonate (GCC) and calcium oxide was pre-floccuated with polyelectrolyte and further treated with carbon dioxide to form new calcium carbonate between GCCs. The final products were called as hybrid calcium carbonate (HCC), and its properties were compared to the GCC and the pre-flocculated GCC. Results showed increase in tensile, smoothness, opacity, and bulk for HCC.

Keywords

Calcium carbonate

high loaded paper

hydrid calcium carbonate

pre-flocculation

mechanical properties

References

Literature Cited

C. F. Baker and B. A. Nazir, Practical ways forward to achieving higher filler content papers, Paper 5Pira International Conference of Use of Minerals in Papermaking, Manchester, U.K. (1997-February)

C. Dong, D. Song and T. Patterson, Ind. Eng. Chem. Res, Energy saving in papermaking through filler addition, 47; 8430-8435 (2008)10.1021/ie8011159

Y. Zhao, D. Kim and D. White, Tappi J., Developing a new paradigm for linerboard fillers, 7(3); 3-7 (2008)

H. Liimatainen, A. Haapala and J. Niinimaki, Tappi J., Retention of PCC and GCC fillers on chemical pulp fines surfaces, 39(9); 38-42 (2009)

Y. L. Zhao, Z. S. Hu, Y. Deng and A. Ragauskas, Tappi J., Improvement of paper properties using starch-modified precipitated calcium carbonate filler, 4(2); 3-7 (2005)

H. Fan, D. Wang, W. Bai and J. Liu, BioResources, Starch-sodium stearate complex modified PCC filler and its application in papermaking, 7(3); 3317-3326 (2012)

S. Y. Yoon and Y. L. Deng, Applied Polymer Science, Clay-starch composite and their application in papermaking, 100; 1032-1038 (2006)10.1002/app.23007

S. Y. Yoon and Y. L. Deng, Tappi J., Starch-fatty complex modified filler for papermaking, 5(9); 3-9 (2006)

Y. Z. Sang, M. McQuaid and P. Englezos, BioResources, Pre-flocculation of precipitated calcium carbonate filler by cationic starch for highly filled mechanical grade paper, 7(1); 354-373 (2012)

V. S. Chauhan and N. K. Bhardwaj, APPITA J., Effect of particle size and preflocculation of talc filler on sizing characteristics of paper, 66(1); 66-72 (2013)

D. Seo, W. H. Im, H. J. Youn and H. L. Lee, Nordic Pulp Pap. Res. J., The effect of process variables for GCC pre-flocculation on floc and handsheet properties, 27(2); 382-387 (2012)10.3183/NPPRJ-2012-27-02-p382-387

Y. Sang and H. J. Xiao, Colloids Interface Sci., Clay flocculation improved by cationic poly (vinyl alcohol)/anionic polymer dual-component system, 326; 420-425 (2008)10.1016/j.jcis.2008.06.058

K. M. Saghavaz, H. Resalati and E. Mehrabi, Powder Technol., Characterization of cellulose-PCC composite filler synthesized from CMC and BSKP fibrils by hydrolysis of ammonium carbonate, 246; 93-97 (2013)10.1016/j.powtec.2013.05.012

R. Subramanian, H. Fordsmand, J. Paltakari and H. Paulapuro, J. Pulp Pap. Sci., new composite fine paper with high filler loading and functional cellulosic microfines, 34(3); 146-152 (2008)

P. Silenius, Improving the combinations of critical properties and process parameters of printing and writing papers and paperboards by new paper-filling methods, Laboratory of Paper Technology, Reports, Series A 14. Helsinki University of Technology. (2002)

J. J. Kim, J. W. Ahn, M. W. Lee, J. K. Lee and Y. B. Seo, APPITA J., Improving recycled fibres in printing paper by application of an in-situ CaCO₃ formation method, I. Process effects, 65(4); 347-351 (2012)

J. J. Kim, J. W. Ahn, M. W. Lee, J. K. Lee and Y.B. Seo, APPITA J., Improving recycled fibres in printing paper by application of an in-situ CaCO₃ formation method, 2. Paper properties, 66(1); 54-58 (2013)

Y. B. Seo, J. K. Chung and Y. H. Lee, (2015)

Y. B. Seo, Y. H. Lee and J. K. Chung, BioResources, The improvement of recycled newsprint properties by in-situ CaCO₃ loading, 9(4); 6254-6266 (2014)10.15376/biores.9.4.6254-6266

Information

Publisher :Korea Technical Association of The Pulp and Paper Industry
Publisher(Ko) :한국펄프종이공학회
Journal Title :Journal of Korea TAPPI
Journal Title(Ko) :펄프종이기술
Volume : 47
No :4
Pages :30-37
Received Date : 2015-07-15
Revised Date : 2015-08-20
Accepted Date : 2015-08-22
DOI :https://doi.org/10.7584/ktappi.2015.47.4.030

Journal of Korea TAPPI ISSN:0253-3200(Print) 펄프종이기술

All Issue

Literature Cited