Review : The Advanced Inkjet Printing Technology

Kyoung Mo Jeong; Jong Myung Won; Yong Kyu Lee; Ken’ichi Koseki

doi:10.7584/ktappi.2014.46.2.046

All Issue

2014 Vol.46, Issue 2 Preview Page

Review : The Advanced Inkjet Printing Technology 총설 : 최신 잉크제트 인쇄기술

30 April 2014. pp. 46-56

PDF XML

Abstract

The aim of this reviews is to introduce the information concerning design of the UV-curable jet ink composition in order to provide a good adhesive property on non-porous surface. In order to clarify the viscosity dependence of flying speed for the UV curable jet ink, rheological analysis and observation of the flying state of the ink were carried out. The relationship between ink formulas and adhesive property on non-porous surface was investigated. It was examined the adhesive property of radical polymerization type UV curable jet ink included hydrogen abstraction type photo-initiator, it was expected that the strong adhesive strength can be obtained between the ink and non-porous surface in this study. UV curable jet ink with a slight amount of water was prepared. Optimum ratio of the cationic polymerization type UV curable jet ink shows an adequate adhesive strength towards two kinds of non-porous surface such as glass, poly(vinyl chloride) when tests were conducted on the ink jet-printing test machine.

Keywords

UV-curable jet ink

radical polymerization

cationic polymerization

adhesion

non-porous surface

References

K. Koseki, J. Jpn. Soc. Colour Mater, Recent advanced ink jet printing technology, 85(6); 254-258 (2012)10.4011/shikizai.85.254

M. Fujii, Journal of Printing Science and Technology, Directions of progress in ink jet technologies, 48(4); 236-240 (2011)

M. Fujii (editorial supervision), The imaging society of Japan, Inkjet, Totyo Denki University Press, Japan. (2008)

A. Tomotake, Journal of the Imaging Society of Japan, Technology and feature of UV curable inkjet ink, 49(5); 412-416 (2010)

K. Koseki, Journal of Printing Science and Technology, Progress of ink-jet printing technologies in industrial fields, 43(3); 152-157 (2006)

K. Koseki, M. Uno, Y. Toyokawa and K. Suzuki, Journal of Printing Science and Technology, Photopolymerization and adhesion properties of UV curable jet ink, 43(4); 272-278 (2006)

K. Koseki, ink, J. Jpn. Soc. Colour Mater, Design of UV-curable jet ink, 81(12); 498-503 (2008)

K. Koseki, K. Ohtsuka and K.M. Jeong, Journal of Photopolymer Science and Technology, UV-curable jet ink having a good adhesive property on non-porous surface achieved by photo-graft polymerization, 25(6); 699-704 (2012)10.2494/photopolymer.25.699

K. Koseki and M. Kamisaki, Journal of Printing Science and Technology, Photosensitivity and adhesion properties of cationic polymerizable jet ink, 44(4); 209-216 (2007)

K. Koseki and K. Ohtsuka, Journal of Printing Science and Technology, Influence of water on polymerization behavior of photoinduced cationic polymerization, 48(1); 63-67 (2011)

J.V. Crivello, D.A. Conlon, D.R. Olson and K.K. Webb, Journal of Radiation Curing, Effects of polyols as chain transfer agents and flexibilizers in photoinitiated cationic polymerization, 13(4); 3-6 (1986)

J.W. Carter and J.K. Braddock, Rad Tech N.A, 94; 246 (1994)

K. Koseki, K. Mikada and K.M. Jeong, J. Jpn. Soc. Colour Mater, Cationic polymerization type UV-curable ink having a good adhesive property on glass surface, 86(3); 77-82 (2013)10.4011/shikizai.86.77

M. Shibatani, Journal of Printing Science and Technology, Latest advances in inkjet technology for industrial applications, 48(4); 246 (2011)

Information

Publisher :Korea Technical Association of The Pulp and Paper Industry
Publisher(Ko) :한국펄프종이공학회
Journal Title :Journal of Korea TAPPI
Journal Title(Ko) :펄프종이기술
Volume : 46
No :2
Pages :46-56
Received Date : 2014-04-08
Revised Date : 2014-04-21
Accepted Date : 2014-04-23
DOI :https://doi.org/10.7584/ktappi.2014.46.2.046

Journal of Korea TAPPI ISSN:0253-3200(Print) 펄프종이기술

All Issue