Manufacture of Recording Paper with Hydrophobicity by Gas Chromatographic Grafting Reaction

Doo-Hyun Kim; Kyoung-Hwa Choi; Jeong-Yong Ryu; Myoung-Ku Lee

doi:10.7584/JKTAPPI.2019.02.51.1.5

All Issue

2019 Vol.51, Issue 1 Next Page

Manufacture of Recording Paper with Hydrophobicity by Gas Chromatographic Grafting Reaction 기상 그라프팅 반응을 이용한 소수성 기록용지 제조

28 February 2019. pp. 5-12

PDF XML

Abstract

This research was conducted to manufacture the recording paper with hydrophobicity by gas chromatography grafting reaction varying the concentration of palmitoyl chloride, followed by determination of hydrophobicity, physical properties, biodegradation and printability of paper. The hydrophobicity of recording paper was improved as the concentration of palmitoyl chloride increased even though both tensile and burst strengths reduced slightly at 2%. Both optical property and printability remained. The higher the hydrophobicity of the paper, the lower the growth rate of bacteria. From these results, it is concluded that the gas chromatographic grafting technology is applicable to the manufacture of the recording paper with good hydrophobicity.

Keywords

Recording paper

gas grafting

absorption rate

antibacterial

hydrophobicity

References

Literature Cited

J. H. Jo, K. H. Choi, Y. S. Kang, J. H. Park, H. Y. Jung and K. D. Yun, Comparison of aging characteristics of the duplicated beeswax-treated and non-treated paper books during humid heating agingProceedings of 2011 Fall Conference of the Korea TAPPI; 429-432 (2011)

Jo, J. H., Choi, K. H., Kang, Y. S., Park, J. H., Jung, H. Y., and Yun, K. D., Comparison of aging characteristics of the duplicated beeswax-treated and non-treated paper books during humid heating aging, Proceedings of 2011 Fall Conference of the Korea TAPPI, pp. 429-432 (2011).

J. H. Park, K. H. Choi and J. H. Seo, Journal of Korea TAPPI, A study on growth of Aspergillus versicolor and Penicillium polonicum within the beeswax treated paper, 42(2); 20-26 (2010)

Park, J. H., Choi, K. H., and Seo, J. H., A study on growth of Aspergillus versicolor and Penicillium polonicum within the beeswax treated paper, Journal of Korea TAPPI 42(2):20-26 (2010).

Korea standard method, Information and documentation－Archival, paper－Requirements for permanence and durability (2014)

KS M ISO 11108, Information and documentation－Archival, paper－Requirements for permanence and durability, Korea standard method (2014).

J. H. Lee, C. K. Kim, J. Y. Ryu and M. K. Lee, Hydrophobization of paper surface by pilot scale gas grafting technologyProceedings of 2015 Spring Conference of the KSIEC; 24 (2015)

Lee, J. H., Kim, C. K., Ryu, J. Y., and Lee, M. K., Hydrophobization of paper surface by pilot scale gas grafting technology, Proceedings of 2015 Spring Conference of the KSIEC, p.24 (2015).

H. L. Lee, H. J. Youn, M. S. Seo, J. J. Lee and J. H. Shin, Improvement of AKD sizing efficiency for linerboardProceedings of 2003 Autumn Conference of the Korea TAPPI; 363-370 (2003)

Lee, H. L., Youn, H. J., Seo, M. S., Lee, J. J., and Shin, J. H., Improvement of AKD sizing efficiency for linerboard, Proceedings of 2003 Autumn Conference of the Korea TAPPI, pp.363-370 (2003).

C. H. Kim and D. S. Shin, Journal of Korea TAPPI, Studies on sizing development of ASA and strength properties of paper by DS of cationic starch and drying temperature of sheets, 26(1); 5-17 (1994)

Kim, C. H. and Shin, D. S., Studies on sizing development of ASA and strength properties of paper by DS of cationic starch and drying temperature of sheets, Journal of Korea TAPPI 26(1):5-17 (1994).

K. T. Hodgson, Appita Journal, A review of paper sizing using alkyl ketene dimer versus alkenyl succinic anhydride, 47(5); 402-406 (1994)

Hodgson, K. T., A review of paper sizing using alkyl ketene dimer versus alkenyl succinic anhydride, Appita Journal 47(5):402-406 (1994).

A. Karademir, D. Hoyland, N. Wiseman and H. Xiao, Appita Journal, A study of the effects of alkyl ketene dimer and ketone on paper sizing and friction properties, 57(2); 116-120 (2004)

Karademir, A., Hoyland, D., Wiseman, N., and Xiao, H., A study of the effects of alkyl ketene dimer and ketone on paper sizing and friction properties, Appita Journal 57(2):116-120 (2004).

A. G. Robert, US patent, Modified filler material for alkaline paper and method of use thereof in alkaline paper making (1996)

Robert, A. G., Modified filler material for alkaline paper and method of use thereof in alkaline paper making, US patent, US5527430 A (1996).

M. Nishiyama, A. Isogai and F. Onabe, Journal of Society of Fiber Science and Technology, Structures of alkenyl succinic anhydride (ASA) components in ASA-sized papersheet, 52(4); 180-188 (1996)

Nishiyama, M., Isogai, A., and Onabe, F., Structures of alkenyl succinic anhydride (ASA) components in ASA-sized papersheet, Journal of Society of Fiber Science and Technology 52(4):180-188 (1996).

10.2115/fiber.52.180

D. Samain, Europe patent, Method for treating a solid material to make it hydrophobic, material obtained and uses (1998)

Samain, D., Method for treating a solid material to make it hydrophobic, material obtained and uses, Europe patent, PTC/FR1998/001808 (1998).

T. J. Lee, J. H. Seo, M. K. Lee and J. Y. Ryu, Journal of Korea TAPPI, Gas grafting of fatty acid chloride and recycled fibers, 48(4); 54-61 (2016)

Lee, T. J., Seo, J. H., Lee, M. K., and Ryu, J. Y., Gas grafting of fatty acid chloride and recycled fibers. Journal of Korea TAPPI 48(4):54-61 (2016).

10.7584/JKTAPPI.2016.08.48.4.54

T. J. Lee, D. J. Lee, J. H. Seo, K. S. Lee, D. Guerin, P. Martinez and J. Y. Ryu, ACS Sustainable Chemistry & Engineering, Preventing discoloration of poly (vinyl alcohol)-coated paper hydrophobized by gas grafting with palmitoyl chloride, 6(2); 1702-1707 (2018)

Lee, T. J., Lee, D. J., Seo, J. H., Lee, K. S., Guerin, D., Martinez, P., and Ryu, J. Y., Preventing discoloration of poly (vinyl alcohol)-coated paper hydrophobized by gas grafting with palmitoyl chloride, ACS Sustainable Chemistry & Engineering 6(2):1702-1707 (2018).

10.1021/acssuschemeng.7b02925

J. H. Seo, T. J. Lee, K. S. Lee, D. J. Lee, M. K. Lee and J. Y. Ryu, Journal of Korea TAPPI, Effect of fluff pulp characteristics on the efficiency of gas grafting by fatty acid chloride, 48(5); 5-12 (2016)

Seo, J. H., Lee, T. J., Lee, K. S., Lee, D. J., Lee, M. K., and Ryu, J. Y., Effect of fluff pulp characteristics on the efficiency of gas grafting by fatty acid chloride, Journal of Korea TAPPI 48(5):5-12 (2016).

10.7584/JKTAPPI.2016.10.48.5.5

M. K. Lee, J. Y. Ryu, C. G. Kim, G. S. Lee, J. H. Lee, H. J. Cho, H. J. Kwon and D. Guérin, Korea patent, Paper sensor with temperature history measurement and its manufacturing method (2017)

Lee, M. K., Ryu, J. Y., Kim, C. G., Lee, G. S., Lee, J. H., Cho, H. J., Kwon, H. J., and Guérin, D., Paper sensor with temperature history measurement and its manufacturing method, Korea patent, 10-1733285 (2017).

Information

Publisher :Korea Technical Association of The Pulp and Paper Industry
Publisher(Ko) :한국펄프종이공학회
Journal Title :Journal of Korea TAPPI
Journal Title(Ko) :펄프종이기술
Volume : 51
No :1
Pages :5-12
Received Date : 2019-01-10
Revised Date : 2019-01-23
Accepted Date : 2019-01-25
DOI :https://doi.org/10.7584/JKTAPPI.2019.02.51.1.5

Journal of Korea TAPPI ISSN:0253-3200(Print) 펄프종이기술

All Issue

Literature Cited