All Issue

2022 Vol.54, Issue 3 Preview Page
Effect of Application of Vinyl Acetate Ethylene Emulsion Binder and Type of Pigment on the Quality of Inkjet Paper

VAE 에멀션 바인더의 적용과 안료 종류가 잉크젯 용지의 품질에 미치는 영향

Sun-Goo Kim1
,
Yong-Kyu Lee2†
김선구 1
,
이용규 2†
1Department of Paper Science & Engineering, College of Forest & Environmental Sciences, Kangwon National University
2Department of Paper Science & Engineering, College of Forest & Environmental Sciences, Kangwon National University
1강원대학교 산림환경과학대학 제지공학과, 학생
2강원대학교 산림환경과학대학 제지공학과, 교수
†Corresponding author: E-Mail: yklee@kangwon.ac.kr (Address: Department of Paper Science & Engineering, College of Forest & Environmental Sciences, Kangwon National University, Chuncheon, Republic of Korea)
30 June 2022. pp. 34-42
PDF XML Citation
Abstract

Zeolites and precipitated calcium carbonate (PCC) were applied together with a vinyl acetate ethylene (VAE) emulsion to identify an alternative pigment for silica to improve runnability and develop the application technology for the VAE emulsion. The low shear and high shear viscosity of the coating color were decreased when zeolites were mixed with PCC. The coating color exhibited lower shear and higher shear viscosity when the emulsion contained VAE than when it containing poly(vinyl) alcohol. Silica with a large specific surface area and pore volume exhibited a small surface contact angle, and the coating color also showed a smaller contact angle with zeolites having a porous structure than with PCC. Silica with a large specific surface area and pore volume showed high print density. For each type of pigment, the print density of coated paper was higher when using zeolites than when using PCC. When the VAE emulsion binder was applied, the ink density decreased.

Keywords
Ink-jet paper
VAE emulsion
pigments
rheology
paper properties
References

Literature Cited

1

McFadden, M. G. and Donigian, D. W., Effect of coating structure and optics on inkjet printability, 1999 TAPPI Coating Conference, pp. 169-177 (1999).

2

Misawa, E. and Nutbeem, C., Recent trends in coating pigment use and formulation practice in asia and western markets, Journal of Japan TAPPI 67(9):977-986 (2013).

10.2524/jtappij.67.977
3

Morita, N., Ueki, H., and Motosugi, U., Paper and ink technology applied for high-speed inkjet production printing, Journal of Japan TAPPI 71(6):83-88 (2017).

10.2524/jtappij.1607
4

Giuliano M., Laudone, G., Matthews, G. P., and Gane, P. A. C., Observation of shrinkage during evaporative drying of water-based paper coating, Industrial & Engineering Chemistry Research 43(3):712-719 (2004).

10.1021/ie0340138
5

Jeong, K. M., Won, J. M., Lee, Y. K., and Koseki, K., Review: The advanced inkjet printing technology – UV curable jet ink, Journal of Korea TAPPI 46(2):46-56 (2014).

10.7584/ktappi.2014.46.2.046
6

Jalindre, S. S., To Investigate the absorption, dynamic contact angle and printability effects of synthetic zeolite pigments in an inkjet receptive coating, Rochester Institute of Technology (2011).

7

Krainer, S., Saes, L., and Hirn, U., Predicting inkjet dot spreading and print through from liquid penetration-and picoliter contact angle measurement, Nordic Pulp & Paper Research Journal 35(1):124-136 (2020).

10.1515/npprj-2019-0088
8

Arif, O. and Dogan, T., The effect of zeolite on inkjet coated paper surface properties and deinking, Nordic Pulp & Paper Research Journal 35(3):432-439 (2020).

10.1515/npprj-2020-0025
9

Lee, Y. K., An, K. H., and Lee, K. S., Influence of mixing ratio of pigments on ink-jet printing properties, Journal of Korea TAPPI 34(1):30-36 (2002).

10

Kim, S. G., Jeong, K. M., and Lee, Y. K., Effective use of binder composition in functional coating (I) – Flow characteristics of coating dispersion and properties of coated paper, Journal of Korea TAPPI 52(4):52-62 (2020).

10.7584/JKTAPPI.2020.08.52.4.52
11

Kim, S. G., Jeong, K. M., and Lee, Y. K., Basic study on manufacturing ink-jet paper for high speed coating (I): Composition of binder and properties of ink-jet paper, Journal of Korea TAPPI 52(6):140-148 (2020).

10.7584/JKTAPPI.2020.12.52.6.140
12

Kim S. G. and Lee Y. G., Basic study on manufacturing of inkjet paper by high-speed coating (Ⅱ) - Effects of binder composition on rheological property of inkjet coating colors -, Journal of Korea TAPPI 53(5):115-121 (2021).

10.7584/JKTAPPI.2021.10.53.5.115
13

Lee, Y. K. and Lee, H. M., The effect of precipitated calcium carbonate having a small particle size on the print quality of an inkjet-grade paper, Journal of Korea TAPPI 37(2):38-46 (2005).

14

Lee, H. M., Kim, C. K., and Lee, Y. K., Influence of the type and blending ratio of binders on ink-jet printing properties, Journal of Korea TAPPI 34(2):22-31 (2002).

15

Lyne, M. B. and Aspler, J. S., Paper for ink jet printing, TAPPI Journal 68(5):106-110 (1985).

Information
  • Publisher :Korea Technical Association of The Pulp and Paper Industry
  • Publisher(Ko) :한국펄프종이공학회
  • Journal Title :Journal of Korea TAPPI
  • Journal Title(Ko) :펄프종이기술
  • Volume : 54
  • No :3
  • Pages :34-42
  • Received Date : 2022-05-09
  • Revised Date : 2022-06-07
  • Accepted Date : 2022-06-09
  • DOI :https://doi.org/10.7584/JKTAPPI.2022.06.54.3.34
Journal Informaiton Journal of Korea TAPPI Journal of Korea TAPPI
Online Submission
  • scopus
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crosscheck
  • orcid
Journal Informaiton Journal Informaiton - close