Journal of Korea TAPPI ISSN:0253-3200(Print) 펄프종이기술

Haydary, J., Chemical process design and simulation Aspen Plus and Aspen Hysys applications, John Wiley & Sons, Inc, Vol. 1, pp. 7-9, WarnockPro by Aptara Inc., New Delhi, India (2019).

White, P. and Ingalls R. G., Introduction to simulation, In Proceedings of the 2015 winter simulation conference (WSC), IEEE, pp. 1374-1388. IEEE.

Shannon, R. E., Introduction to simulation, In Proceedings of the 24th conference on Winter simulation, pp. 65-73 (1972).

Bradley, P., The history of simulation in medical education and possible future directions, Medical Education 40(3):254-262 (2006).

Goldsman, D., Nance, R. E., and Wilson, J. R., A brief history of simulation revisited, In Proceedings of the 2010 Winter Simulation Conference, IEEE, pp. 567-574.

Rubinstein, R. Y. and Kroese, D. P., Simulation and the Monte Carlo method, John Wiley & Sons Inc., Vol. 10, pp. 1-4, Hoboken, New Jersey (2016).

Robinson, S., Discrete-event simulation: From the pioneers to the present, what next?, Journal of the Operational Research Society 56(6):619-629 (2005).

Choi, J. H., Lee, J. Y., and Yoo, C. D., Simulation of dynamic behavior in a GMAW system, Welding Journal, New York, 80(10):239S-246S (2001).

Blanco, A., Dahlquist, E., Kappen, J., Manninen, J., Negro, C., and Ritala, R., Use of modelling and simulation in the pulp and paper industry, Mathematical and Computer Modelling of Dynamical Systems 15(5):409-423 (2009)

Kumar, D., Kumar, V., and Singh, V. P., Modeling and dynamic simulation of mixed feed multi-effect evaporators in paper industry, Applied Mathematical Modelling 37(1-2):384-397 (2013).

April, J., Glover, F., Kelly, J. P., and Laguna, M., Practical introduction to simulation optimization, In Proceedings of the 35th conference on Winter simulation: driving innovation, pp. 71-78 (2003).

Li, J., Zhang, Y., and Liu, H., Simulation of multiple effect evaporators for energy-saving studies in a chemical pulp mill, In Proceeding of the 11th World Congress on Intelligent Control and Automation, IEEE, pp. 2791-2797 (2014)

Verma, O. P., Mohammed, T. H., Mangal, S., and Manik, G., Optimization of steam economy and consumption of heptad’s effect evaporator system in Kraft recovery process, International Journal of System Assurance Engineering and Management 9(1):111-130 (2018).

Chantasiriwan, S., Increased energy efficiency of a backward-feed multiple-effect evaporator compared with a forward-feed multiple-effect evaporator in the cogeneration system of a sugar factory, Processes 8(3):342 (2020).

Darwish, M. A. and Abdulrahim, H. K., Feed water arrangements in a multi-effect desalting system, Desalination 228(1-3):30-54 (2008).

Lee, J. G., Bak, C. U., Thu, K., Ghaffour, N., and Kim, Y. D., Effect of seawater-coolant feed arrangement in a waste heat driven multi-stage vacuum membrane distillation system, Separation and Purification Technology 212:12-20 (2019).

Morin, O. J., Design and operating comparison of MSF and MED systems, Desalination 93(1-3):69-109 (1993).

Giaccone, P. R. and Jones, G. A., Feed-forward estimation of optical flow, In 1997 Sixth International Conference on Image Processing and Its Applications Vol. 1, pp. 204-208, IET.

Al-Mutaz, I. S. and Wazeer, I., Comparative performance evaluation of conventional multi-effect evaporation desalination processes, Applied Thermal Engineering 73(1):1194-1203 (2014).

Sagharichiha, M., Jafarian, A., Asgari, M., and Kouhikamalid, R., Simulation of a forward feed multiple effect desalination plant with vertical tube evaporators, Chemical Engineering and Processing: Process Intensification 75:110-118 (2014).

Morin, O. J., Design and operating comparison of MSF and MED systems, Desalination 93(1-3):69-10 (1993).

Lee, J. G., Bak, C. U., Thu, K., Ghaffour, N., and Kim, Y. D., Effect of seawater-coolant feed arrangement in a waste heat driven multi-stage vacuum membrane distillation system, Separation and Purification Technology 212:12-20 (2019).