Literature Cited
Afshar, P., Brown, M., Austin, P., Wang, H., Breikin, T., and Maciejowski, J., Sequential modelling of thermal energy: New potential for energy optimisation in papermaking, Applied Energy 89(1):97-105 (2012).
10.1016/j.apenergy.2011.01.022Ghosh, A. K. and Oxley, F., Pocket ventilation - An often forgotten area of paper drying, Appita J. 60(4):301-308 (2007).
Sivill, L. and Ahtila, P., Energy efficiency improvement of dryer section heat recovery systems in paper machines - A case study, Applied Thermal Engineering 29(17-18):3663-3668 (2009).
10.1016/j.applthermaleng.2009.06.022Laurijssen, J., De Gram, F. J., Worrell, E., and Faaij, A., Optimizing the energy efficiency of conventional multi-cylinder dryers in the paper industry, Energy 35(9):3738-3750 (2010).
10.1016/j.energy.2010.05.023Ekvall, J. and Hägglund, T., Improved web break strategy using a new approach for steam pressure control in paper machines, Control Engineering Practice 16(10):1151-1160 (2008).
10.1016/j.conengprac.2007.11.008Nilsson, L., Heat and mass transfer in multicylinder drying: Part I. Analysis of machine data, Chemical Engineering and Processing 43(12):1547-1553 (2004).
10.1016/j.cep.2004.03.003Karlsson, M. and Stenström, S., Static and dynamic modeling of cardboard drying Part 1: Theoretical model, Drying Technology 23(1):143-163 (2005).
10.1081/DRT-200047954Heo, C. H., Cho, H., and Yeo, Y.-K., Dynamic modeling of paper drying processes, Korean J. of Chemical Engineering 28(8):1651-1657 (2011).
10.1007/s11814-011-0046-0Lu, T. and Shen, S. Q., Numerical and experimental investigation of paper drying: Heat and mass transfer with phase change in porous media, Applied Thermal Engineering 27(8-9):1248-1258 (2007).
10.1016/j.applthermaleng.2006.11.005Gong, Z., Liu, Z., Li, S., and Zhang, G., Heat balance of drying section and its computer aided calculation, China Pulp & Paper 12(3):31-35 (1993).
Tian, L., Li, S., and Miao, D., Calculation of energy and ventilation systems in the drying section of Fourdrinier paper machine, Tianjin Zaozhi (2):2-8 (1995).
Liu, J., Liu, H., and Gao, Y., Study on simulation platform for pulping and paper-making process, Transactions of China Pulp and Paper 26(1):55-59 (2011).
Li, Y., Liu, H., Li, J., Tao, J., and Lin, Z., Simultaneous module-based optimization of operation parameters of dryer section in paper machine, Journal of South China University of Technology 39(3):8-12 (2011).
Zhou, Y., Liu, H., and Li, J., The dryer section modeling based on integrated analysis of material, energy and exergy flows, Transactions of China Pulp and Paper 29(1):33-40 (2014).
Zhang, D., Liu, H., Li, J., and Tao, J., Research on technological innovation applied in paper dry system for energy saving and optimization based on muti-agents and government behavior influencing its development, Paper Science & Technology 33(4):82-88 (2014).
Ghodbanan, S., Alizadeh, R., and Shafiei, S., Steady-state modeling of multi-cylinder dryers in a corrugating paper machine, Drying Technology 33(12):1474-1490 (2015).
10.1080/07373937.2015.1020161Zhou, Y., Liu, H., and Li, J., General modeling of papermaking process based on integrated analyses of material, energy and exergy flows, Journal of South China University of Technology 40(5):76-83 (2012).
He, B., Papermaking Principle and Engineering, China Light Industry Press, Beijing, China, pp. 286-300 (2014).
- Publisher :Korea Technical Association of The Pulp and Paper Industry
- Publisher(Ko) :한국펄프종이공학회
- Journal Title :Journal of Korea TAPPI
- Journal Title(Ko) :펄프종이기술
- Volume : 52
- No :4
- Pages :38-51
- Received Date : 2020-07-08
- Revised Date : 2020-08-19
- Accepted Date : 2020-08-20
- DOI :https://doi.org/10.7584/JKTAPPI.2020.08.52.4.38
Journal of Korea TAPPI
