Journal of Korea TAPPI ISSN:0253-3200(Print) 펄프종이기술

Nowadays, the bleaching techniques of thermomechanical pulp(TMP) are fast developing on the strength of some benefits, mainly on low production cost and good fiber property. In this study, the optimum concentration of bleaching chemicals and the environmental load of bleaching wastes were considered to improve the bleaching efficiency of thermomechanical pulp using Korean redpine(Pinus densiflora) under the peroxide-based bleaching system. The optical property of TMP after bleaching was planned to use higher grade of paper, like printing & writting paper, not general newspaper.

The concentration of bleaching chemicals, NaOH, Na₂SiO₃ and EDTA, in hydrogen peroxide bleaching system, on the basis of O.D. pulp was closely influenced on the improvement of TMP brightness. Final target of bleaching efficiency was set up to above 76%-ISO brightness. The optimal target brightness of Korean redpine TMP was reached to 76.45%-ISO under the conditions of H₂O₂ 7% with NaOH 2.20%, Na₂SiO₃ 0.63% and EDTA 0.02%. The concentration of NaOH, Na₂SiO₃ and EDTA was correlated functional to the residual peroxide content of wastewater, pH value and electric conductivity of TMP fibers after bleaching treatment. The optimal bleaching conditions by controlling the addition amount of chemicals were positively contributed to the brightness stabilization and environmental load of TMP.