Manufacturing and Characterization of Pulp Mold with Rice Husk Fiber

Hyung Min Kim; Yong Joo Sung; Young Seok Park; Jea Chul Shin

doi:10.7584/ktappi.2016.48.3.066

All Issue

2016 Vol.48, Issue 3 Preview Page Next Page

Manufacturing and Characterization of Pulp Mold with Rice Husk Fiber 왕겨섬유를 포함한 펄프몰드 제조 및 특성 평가

30 June 2016. pp. 66-72

PDF XML

Abstract

The applicability of rice husk fiber as a raw material for eco-friendly pulp mold was evaluated in this study. The higher demand of environmental friendly packaging material resulted in the more interest for the natural fiber based pulp mold. The rice husk which is an abundant agricultural byproduct in Asia could be defiberized by an alkaline digestion process. The changes in the pulp mold making process and the properties of pulp mold by the addition of the rice husk were investigated.

The addition of rice husk fiber to the pulp mold made with OCC or UBKP resulted in the increase in drainage at the pulp mold forming process. In case of UBKP pulp mold, the addition of rice husk fiber increased the drying efficiency after pulp mold forming since the structure of pulp mold became more bulkier by the addition of the rice husk fiber. Those results showed the rice husk fiber could be applied to the pulp mold manufacturing as one of the eco-friendly natural fiber resources.

Keywords

Pulp mold

rice husk

bulk

packaging

drainage

References

Literature Cited

G. J. Kim, C. H. Kim, Y. M. Lee, D. B. Song, T. G. Shin, J. O. Kim and C. Y. Park, Journal of Korea TAPPI, Utilization of wastepaper fibers for development of environment-friendly shock-absorbing materials, 38(2); 52-60 (2006)

Kim, G. J., Kim, C. H., Lee, Y. M., Song, D. B., Shin, T. G., Kim, J. O., and Park, C. Y., Utilization of wastepaper fibers for development of environment-friendly shock-absorbing materials, Journal of Korea TAPPI 38(2): 52-60(2006).

N. Johar, I. Ahmad and A. Dufresne, Industrial Crops and Products, Extraction, preparation and characterization of cellulose fibres and nanocrystals from rice husk, 37; 93-99 (2012)

Johar, N., Ahmad, I., and Dufresne, A., Extraction, preparation and characterization of cellulose fibres and nanocrystals from rice husk, Industrial Crops and Products 37: 93–99 (2012).

10.1016/j.indcrop.2011.12.016

I. S. Park, J. N. Kim, D. Y. Kim and Y. S. Lee, Journal of Korea TAPPI, Effects of mixing ratio of ONP and OCC on physical properties of pulp molds for cushion packaging materials, 40(1); 47-54 (2008)

Park, I. S., Kim, J. N., Kim, D. Y., and Lee, Y. S., Effects of mixing ratio of ONP and OCC on physical properties of pulp molds for cushion packaging materials, Journal of Korea TAPPI 40(1): 47-54(2008).

Y. J. Sung, J. Y. Ryu, H. J. Kim, T. K. Kim and B. K. Song, Journal of Korea TAPPI, Improvement of drainage at wet pulp mold process, 36(3); 52-59 (2004)

Sung, Y. J., Ryu, J. Y., Kim, H. J., Kim, T. K., and Song, B. K., Improvement of drainage at wet pulp mold process, Journal of Korea TAPPI 36(3): 52-59(2004).

H. J. Kim, J. H. Seo and J. Y. Ryu, Applied Chemistry, The application of functional additives for the improvement of dewatering ability to pulp mold, 8(1); 279-282 (2004)

Kim, H. J., Seo, J. H., and Ryu, J. Y., The application of functional additives for the improvement of dewatering ability to pulp mold, Applied Chemistry 8(1): 279-282 (2004).

Y. J. Sung, J. Y. Ryu, H. J. Kim, T. K. Kim and B. K. Song, Journal of Korea TAPPI, Optimization of wet pulp mold process and reduction of drying energy, 36(3); 83-90 (2004)

Sung, Y. J., Ryu, J. Y., Kim, H. J., Kim, T. K., and Song, B. K., Optimization of wet pulp mold process and reduction of drying energy, Journal of Korea TAPPI 36(3): 83-90(2004).

J. H. Kang and H. A. Lim, Journal of Korea TAPPI, Development of higher functional coating agents for pulp mold (I) - Investigation of functions synthetic and natural coating agents, 34(4); 37-43 (2002)

Kang, J. H., and Lim, H. A., Development of higher functional coating agents for pulp mold (I) - Investigation of functions synthetic and natural coating agents, Journal of Korea TAPPI 34(4): 37-43(2002).

S. J. Park, M. H. Kim and H. M. Shin, J. of Biosystems Eng, Chemical compositions and thermal characteristics of rice husk and rice husk ash in Korea, 30(4); 235-241 (2005)

Park, S. J., Kim, M. H., and Shin, H. M., Chemical compositions and thermal characteristics of rice husk and rice husk ash in Korea, J. of Biosystems Eng. 30(4): 235-241(2005).

10.5307/JBE.2005.30.4.235

Y. J. Sung, S. J. Shin and M-T. Oh, Journal of Korea TAPPI, Chemical composition of rice hull and morphological properties of rice hull fibers, 41(3); 22-28 (2009)

Sung, Y. J., Shin, S. J., and Oh M-T., Chemical composition of rice hull and morphological properties of rice hull fibers, Journal of Korea TAPPI 41(3): 22-28(2009).

I. D. Joo, H. S. Lee and B. H. Lee, Journal of the Korean Ceramic Society, Synthesis of sphene - pink pigment by rice husk ash, 47(3); 237-243 (2010)

Joo, I. D., Lee, H. S., and Lee, B. H., Synthesis of sphene - pink pigment by rice husk ash, Journal of the Korean Ceramic Society 47(3): 237-243(2010).

10.4191/KCERS.2010.47.3.237

J. Y. Lee, Y. H. Kim, C. H. Kim, Y. J. Sung, S. W. Wi, J. H. Park and E. H. Kim, Journal of Korea TAPPI, Development of new organic filler made from rice husk by paperboard mill trials, 47(4); 96-101 (2015)

Lee, J. Y., Kim, Y. H., Kim, C. H., Sung, Y. J., Wi, S. W., Park, J. H., and Kim, E. H., Development of new organic filler made from rice husk by paperboard mill trials, Journal of Korea TAPPI 47(4): 96-101(2015).

10.7584/ktappi.2015.47.4.096

Y. J. Kim, Y. K. Kang, Y. S. Ryou, G. C. Kang and Y. Paek, J. of Biosystems Eng, Gasification characteristics of rice husks in batch operation, 33(4); 248-252 (2008)

Kim, Y. J., Kang, Y. K., Ryou, Y. S., Kang, G. C., and Paek, Y., Gasification characteristics of rice husks in batch operation, J. of Biosystems Eng. 33(4): 248-252(2008).

10.5307/JBE.2008.33.4.248

H. H. Lee and K. -S. Han, Mokchae Konghak, Study on the optimum pre-treatment condition for anufacture of rice hull board, 28(3); 9-13 (2000)

Lee, H. H., and Han, K. -S., Study on the optimum pre-treatment condition for anufacture of rice hull board, Mokchae Konghak 28(3): 9-13(2000).

B. H. Lee, H. -S. Kim, S. -W. Choi and H. -J. Kim, Mokchae Konghak, Improvement of interfacial adhesion for surface treated rice husk flourfilled polypropylene bio-composites, 34(3); 38-45 (2006)

Lee, B. H., Kim, H. -S., Choi, S. -W., and Kim, H. -J., Improvement of interfacial adhesion for surface treated rice husk flourfilled polypropylene bio-composites, Mokchae Konghak 34(3): 38-45(2006).

M. T. Oh and Y. J. Sung, Journal of Korea TAPPI, Study of rice husk pulping for utilization of rice husk fiber, 44(3); 63-69 (2012)

Oh, M. T., and Sung, Y. J., Study of rice husk pulping for utilization of rice husk fiber, Journal of Korea TAPPI 44(3): 63-69(2012).

10.7584/ktappi.2012.44.3.063

Information

Publisher :Korea Technical Association of The Pulp and Paper Industry
Publisher(Ko) :한국펄프종이공학회
Journal Title :Journal of Korea TAPPI
Journal Title(Ko) :펄프종이기술
Volume : 48
No :3
Pages :66-72
Received Date : 2016-05-26
Revised Date : 2016-06-15
Accepted Date : 2016-06-20
DOI :https://doi.org/10.7584/ktappi.2016.48.3.066

Journal of Korea TAPPI ISSN:0253-3200(Print) 펄프종이기술

All Issue

Literature Cited