All Issue

2022 Vol.54, Issue 6 Preview Page
The Effect of Fines on the Change of the Friction Coefficient of Recycled Linerboard during Calendering Treatment
Sek Bih Fang1
,
Jeong Yong Ryu2†
1Division of Wood & Paper Science, College of Forest and Environmental Sciences, Kangwon National University, Graduate Student
2Division of Wood & Paper Science, College of Forest and Environmental Sciences, Kangwon National University, Professor
†Corresponding author: E-Mail: jyryu@kangwon.ac.kr (Address: Division of Wood & Paper Science, College of Forest and Environmental Sciences, Kangwon National University, Chuncheon, 24341, Republic of Korea)
30 December 2022. pp. 135-144
PDF XML Citation
Abstract

When linerboard is manufactured by blending recycled OCC pulp with recycled pulp from aseptic carton, the results reported that factors other than surface roughness are related to the coefficient of friction. Calendering exacerbated the problem of a sharp decrease in coefficient of friction according to the mixing of aseptic carton pulp. Therefore, we tried to understand the aforementioned changes in the coefficient of friction by evaluating the effect of the surface residue of fines derived from aseptic carton on the sliding angle and surface roughness of aseptic carton-based recycled paper. Handsheets were made from recycled pulp extracted from aseptic cartons and then coated with fines slurries at 3% and 5% concentrations. It was confirmed that the higher the proportion of recycled pulp fines used in handsheet coating, the lower is the coefficient of friction of the handsheets. Coating the handsheets with a large amount of recycled pulp fines reduced friction after calendering. This study suggested that influence factors such as changes in actual contact area are essential to be investigated in controlling the friction coefficient of recycled paper.

Keywords
Coefficient of friction
roughness
fines
aseptic carton
OCC
References

Literature Cited

1

Sek B. F. and Ryu, J. Y., The effect of calendering treatment on the friction coefficient of recycled linerboard from aseptic carton, Journal of KTAPPI 54(4):116-124 (2022)

10.7584/JKTAPPI.2022.12.54.6.116
2

Bowden, F. P. and Tabor, D., The Friction and Lubrication of Solids, Oxford: Oxford University Press (1950).

3

Fulleringer, N., Contribution to the Study of Friction Phenomena: Application to Paper Materials, Université de Grenoble (2014).

4

Fundamentals of contact mechanics and friction. Handbook of Friction-Vibration Interactions, pp. 71-152 (2014).

10.1533/9780857094599.71
5

Garoff, N., Fellers, C. and Nilvebrant, N., Friction hysteresis of paper, Wear 256, pp. 190-196 (2003).

10.1016/S0043-1648(03)00404-6
6

Garoff, N., Nilvebrant, N. and Fellers, C., Friction of linerboard based on recycled fiber, Journal of Applied Polymer Science 85:1511-1520 (2002).

10.1002/app.10783
7

Greenwood, J. A. and Williamson, J. B. P. P., Contact of nominally flat surface, Proceedings of The Royal Society A Mathematical Physical and Engineering Sciences, pp. 300-319 (1966).

10.1098/rspa.1966.0242
8

Grzesik, W., Surface integrity, In Advanced Machining Processes of Metallic Materials, pp. 533-561 (2017).

10.1016/B978-0-444-63711-6.00020-X
9

Gurnagul, N., Ouchi, M. D., Dunlop-Jones, N., Sparkes, D. G. and Wearing, J. T., Factors affecting the coefficient of friction of paper. Journal of Applied Polymer Science, 46:805-814 (1992).

10.1002/app.1992.070460508
10

Hanaor, D., Gan, Y. and Einav, I., Static friction at fractal interfaces, Tribology International, 93:229-238 (2016).

10.1016/j.triboint.2015.09.016
11

Hubbe, M., Water and Papermaking 2. White water components, Paper Technology 48(2):31-40 (2007).

12

Waterhouse, J. F. and Omori, K., The effect of recycling on the fines contribution to selected paper properties, In Products of Papermaking, Trans. of the Xth Fund. Res. Symp. Oxford, 1993, Baker, C. F. (ed.), FRC, Manchester, pp. 1261-1292 (2018).

13

Vernhes, P., Bloch, J.-F., Blayo, A. and Pineaux, B., Effect of calendering on paper surface micro-structure: A multi-scale analysis, Journal of Materials Processing Technology, 209(11):5204-5210 (2009).

10.1016/j.jmatprotec.2009.03.005
14

Litvinov, V. and Farnood, R., Modeling thickness and roughness reduction of paper in calendering, Nord. Pulp Pap. Res. J. 21:365-371 (2006).

10.3183/npprj-2006-21-03-p365-371
15

Lepoutre, P. and Means, G., Supercalendering and coating properties. Tappi J. 61:85-87 (1978).

Information
  • Publisher :Korea Technical Association of The Pulp and Paper Industry
  • Publisher(Ko) :한국펄프종이공학회
  • Journal Title :Journal of Korea TAPPI
  • Journal Title(Ko) :펄프종이기술
  • Volume : 54
  • No :6
  • Pages :135-144
  • Received Date : 2022-10-04
  • Revised Date : 2022-12-23
  • Accepted Date : 2022-12-26
  • DOI :https://doi.org/10.7584/JKTAPPI.2022.12.54.6.135
Journal Informaiton Journal of Korea TAPPI Journal of Korea TAPPI
Online Submission
  • scopus
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crosscheck
  • orcid
Journal Informaiton Journal Informaiton - close