All Issue

2017 Vol.49, Issue 5 Preview Page
30 October 2017. pp. 28-33
Abstract
References

Literature Cited

1
A. G. Smook, Non-fibrous additives to papermaking stock, Ch. 15; 218-226, In Handbook for Pulp & Paper Technologists, Angus Wilde Publications Inc.. (2002)

Smook, A. G., Non-fibrous additives to papermaking stock, In Handbook for Pulp & Paper Technologists, Ch. 15, Angus Wilde Publications Inc., pp. 218-226 (2002).

2
H. G. Fairchild, Tappi Journal, Increasing the filler content of PCC-filled alkaline papers, 75(8); 85-90 (1992)

Fairchild, H. G., Increasing the filler content of PCC-filled alkaline papers, Tappi Journal 75(8):85-90 (1992).

3
B. Krogerus, In Papermaking Chemistry, Papermaking Science and Technology, Fillers and pigments, Vol. 4Ch. 6; 116-149, Atlanta. TAPPI Press. (1997)

Krogerus, B., Fillers and pigments, In Papermaking Chemistry, Papermaking Science and Technology, Vol. 4, Ch. 6, TAPPI Press, Atlanta, pp. 116-149 (1997).

4
H. L. Lee, B. J. Lee, D. S. Shin, K. P. Lim, Y. B. Seo, J. M. Won and C. M. Son, Filler loading, Ch. 11; 281-293, Suwon. In Papermaking ScienceKwangil Press. (2000)

Lee, H. L., Lee, B. J., Shin, D. S., Lim, K. P., Seo, Y. B., Won, J. M., and Son, C. M., Filler loading, In Papermaking Science, Ch. 11, Kwangil Press, Suwon, pp. 281-293 (2000).

5
S. Mabbe and R. Harvey, Filler flocculation technology - Increasing filler content without loss in strength or runnability parameters2000 Tappi Papermakers Conference and Trade Fair 2; 797-809

Mabbe, S. and Harvey, R., Filler flocculation technology - Increasing filler content without loss in strength or runnability parameters, 2000 Tappi Papermakers Conference and Trade Fair 2, pp. 797-809.

6
D. Solberg and L. Wågberg, Journal of Pulp and Paper Science, On the mechanism of GCC filler retention during dewatering - New techniques and initial findings, 28(6); 183-188 (2002)

Solberg, D. and Wågberg, L., On the mechanism of GCC filler retention during dewatering - New techniques and initial findings, Journal of Pulp and Paper Science 28(6):183-188 (2002).

7
C. H. Kim, J. Y. Lee, H. K. Lee and H. J. Gwak, Journal of Korea TAPPI, Study on fly ash as a new raw material in paperboard process, 42(4); 78-83 (2010)

Kim, C. H., Lee, J. Y., Lee, H. K., and Gwak, H. J., Study on fly ash as a new raw material in paperboard process, Journal of Korea TAPPI 42(4):78-83 (2010).

8
J. Y. Lee, G. B. Lim, Y. H. Kim, S. R. Lee, M. Y. Kim, C. H. Kim, S. Y. Kim and J. S. Kim, Journal of Korea TAPPI, Evaluation of the physical properties of organic fillers made from agricultural byproducts, 45(4); 34-41 (2013)

Lee, J. Y., Lim, G. B., Kim, Y. H., Lee, S. R., Kim, M. Y., Kim, C. H., Kim, S. Y., and Kim, J. S., Evaluation of the physical properties of organic fillers made from agricultural byproducts, Journal of Korea TAPPI 45(4):34-41 (2013).

10.7584/ktappi.2013.45.4.034
9
H. J. Kang, M. S. Song and Y. S. Kim, Journal of the Korean Ceramic Society, The effects of sepiolite on the properties of portland cement mortar, 45(8); 443-452 (2008)

Kang, H. J., Song, M. S., and Kim, Y. S., The effects of sepiolite on the properties of portland cement mortar, Journal of the Korean Ceramic Society 45(8):443-452 (2008).

10.4191/kcers.2008.45.8.443
10
M. Laufmann and M. Forsblom, Tappi Journal, GCC vs. PCC as the primary filler for uncoated and coated wood-free paper, 83(5); 1-13 (2000)

Laufmann, M. and Forsblom, M., GCC vs. PCC as the primary filler for uncoated and coated wood-free paper, Tappi Journal 83(5):1-13 (2000).

11
A. M. Hubbe and A. R. Gill, Filler particle shape vs. paper properties - A review, 2004 Paper SummitSpring Technical & International Environmental Conference

Hubbe, A. M. and Gill, A. R., Filler particle shape vs. paper properties - A review, 2004 Paper Summit, Spring Technical & International Environmental Conference.

Information
  • Publisher :Korea Technical Association of The Pulp and Paper Industry
  • Publisher(Ko) :한국펄프종이공학회
  • Journal Title :Journal of Korea TAPPI
  • Journal Title(Ko) :펄프종이기술
  • Volume : 49
  • No :5
  • Pages :28-33
  • Received Date : 2017-09-19
  • Revised Date : 2017-10-23
  • Accepted Date : 2017-10-24